LightKey Datasheet of 1.00 inch Single Digit 16 Segment LED Display LD23013A/B Series – 1.00 inch Single Digit 16 Segment LED Display ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Available options ¾ 25.40 mm (1.00 inch) digit high ¾ ¾ Excellent digit appearance ¾ Wide viewing angle ¾ Range of emitted colors ¾ I.C. compatible ¾ Low power consumption ¾ White segment, black face ¾ RoHS compliant Alternative emitting luminosity: Standard or high brightness version ¾ ¾ ¾ ¾ ¾ Alternative emitted color Alternative face and segment color Alternative font Both CA and CC versions are available Cropped terminal pins Package Dimensions DP2 F E A1 A 2 H I J G1 G2 M K L D1 D2 B C DP1 Notes: 1. All dimensions are in millimeters (inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DS10121749 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 1/3 DATE: Jul/20/2011 LightKey Datasheet of 1.00 inch Single Digit 16 Segment LED Display Internal Circuit Diagram LD23013A (Common Cathode) LD23013B (Common Anode) 5, 8, 17& 20 NO PIN 5, 8, 17& 20 NO PI N Selection Guide Single Digit 16 Segment LED Display, Digit Height:25.40mm(1.00 inch), External Dimensions: 23.00x33.00x9.00mm (L x W x H ) Part No. Chip Common Common Cathode Anode LD23013AR LD23013BR GaAlAs Super Red LD23013AD LD23013BD GaAlAs LD23013AO LD23013BO LD23013AY Material Color IV@IF=20mA One Seg WLD IV@IF=20mA One Seg A D G or DP Min. Typ. Min. Typ. 640 12 15 8 10 Hi-Red 640 27 37.5 18 25 GaAsP Orange 625 10.5 13.5 7 9 LD23013BY GaAsP Yellow 588 12 15 8 10 LD23013AG LD23013BG GaP Green 568 10.5 13.5 7 9 LD23013AUR LD23013BUR AlGaInP Ultra Red 640 45 67.5 30 45 LD23013AUO LD23013BUO AlGaInP Ultra Orange 625 67.5 90 45 60 LD23013AUA LD23013BUA AlGaInP Ultra Amber 605 45 67.5 30 45 LD23013AUY LD23013BUY AlGaInP Ultra Yellow 595 45 67.5 30 45 LD23013AUG LD23013BUG AlGaInP Ultra Green 573 45 67.5 30 45 LD23013APG LD23013BPG InGaN Pure Green 525 180 450 120 300 LD23013AUB LD23013BUB InGaN Ultra Blue 470 45 67.5 30 45 LD23013AUW LD23013BUW SMD Ultra White \ 150 180 100 120 Unit: \ \ \ nm mcd mcd mcd mcd SPEC NO: DS10121749 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 2/3 DATE: Jul/20/2011 LightKey Datasheet of 1.00 inch Single Digit 16 Segment LED Display Electrical Characteristics & Absolute Maximum Ratings Electrical optical Parameter Forward Hi-Red Orange Yellow Green Ultra Red Ultra Orange Ultra Amber Ultra Yellow Ultra Green Pure Green Ultra Blue Ultra White Unit: Reverse Voltage Emitted color Super Red Absolute Maximum Ratings[1] Characteristics[1] Current @ IF=20mA VR=5V Power Dissipation DC Peak Forward Forward Current Current[2] Typ. Max. Per Seg. 1.8 2.2 30 60 25 100 Per DP 1.8 2.2 30 60 25 100 Per Seg. 1.8 2.2 30 60 25 100 Per DP 1.8 2.2 30 60 25 100 Per Seg. 2.1 2.5 30 80 30 100 Per DP 2.1 2.5 30 80 30 100 Per Seg. 2.1 2.5 30 80 30 100 Per DP 2.1 2.5 30 80 30 100 Per Seg. 2.2 2.5 30 80 30 100 Per DP 2.2 2.5 30 80 30 100 Per Seg. 1.9 2.6 30 60 30 100 Per DP 1.9 2.6 30 60 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2 2.6 30 65 30 100 Per DP 2 2.6 30 65 30 100 Per Seg. 2.1 2.6 30 75 30 100 Per DP 2.1 2.6 30 75 30 100 Per Seg. 3.5 4 30 110 30 100 Per DP 3.5 4 30 110 30 100 Per Seg. 3.5 4 30 120 30 100 Per DP 3.5 4 30 120 30 100 Per Seg. 3.5 4 30 120 30 100 Per DP 3.5 4 30 120 30 100 V V uA mW mA mA \ Notes: 1. At Ta = 25 °C. 2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse. SPEC NO: DS10121749 REV: A.4 HTTP://WWW.DISPLAY-LEDS.COM CHECKED: Emily Zhou APPROVED: M.H. Lin TEL: 0086-574-86322282 PAGE: 3/3 DATE: Jul/20/2011