ACT ACTF9205-2345-DCC6C Low-loss rf filter Datasheet

ACTF9205-2345-DCC6C
Features
 Low-loss RF filter
 High Rejection
 Single Ended Operation at 50Ω without matching
 Ceramic Package for Surface Mounted
Technology (SMT)
 Lead-free Production and RoHS Compliance
Package Dimensions
Ceramic Package: DCC6C
Pin Configuration
2
Input
5
Output
1, 3, 4, 6
Case Ground
1, 3, 4, 6
To Be Grounded
Marking
Laser Marking
Maximum Ratings
Rating
Value
Unit
Operating Temperature Range
TA
-40 ~ +85
°C
Storage Temperature Range
Tstg
-40 ~ +85
°C
DC Voltage (between any Terminals)
VDC
12
V
P
10max.
dBm
RF Power (in BW)
Electrical Characteristics
Item
Center Frequency
Maximum Insertion Loss in 2320 MHz–2370MHz
Minimum
Typical
fC
-
IL
-
Amplitude Variation in 2320 MHz–2370MHz
Absolute Attenuation
Maximum
Unit
2345
-
MHz
2.6
3.2
dB
0.7
1.2
dB
α
0.30 … 2170.0MHz
30
33
-
dB
2170.0 … 2190.0 MHz
30
34
-
dB
2190.0 … 2300.0 MHz
4
8.5
2390.0 … 2460.0 MHz
4
9
-
dB
2460.0 … 2585.0 MHz
30
40
-
dB
2585.0 … 3000.0 MHz
25
35
--
dB
Input VSWR in 2320 MHz–2370MHz
-
1.8:1
2.0:1
Output VSWR in 2320 MHz–2370MHz
-
1.8:1
2.0:1
15
30
Group delay ripple
2320 MHz–2370MHz
Source / Load Impedance (single ended)
RoHS Compliant
Typical Frequency Response
50
Electrostatic Sensitive Device
ns
Ω
Stability Characteristics
Test item
Condition of test
1
Mechanical shock
(a) Drops: 3 times on concrete floor
(b) Height: 1.0 m
2
Vibration resistance
(a) Frequency of vibration: 10~55Hz
(c) Directions: X,Y and Z
(b) Amplitude: 1.5 mm
(d) Duration: 2 hours
3
Moisture resistance
(a) Condition: 40°C, 90~95% R.H.
(c) Wait 4 hours before measurement
(b) Duration: 96 hours
4
Climatic sequence
(a) +70°C for 16 hours
(b) +55°C for 24 hours, 90~95% R.H.
(c) -25°C for 2 hours
(d) +40°C for 24 hours, 90~95% R.H.
(e) Wait 4 hours before measurement
5
High temperature exposure
(a) Temperature: 70°C
(c) Wait 4 hours before measurement
6
Thermal impact
(a) +70°C for 30 minutes  -25°C for 30 minutes repeated 3 times
(b) Wait 4 hours before measurement
(b) Duration: 250 hours
Requirements: The SAW filer shall remain within the electrical specifications after tests.
Remarks
 SAW devices should not be used in any type of fluid such as water, oil, organic solvent, etc.
 Be certain not to apply voltage exceeding the rated voltage of components.
 Do not operate outside the recommended operating temperature range of components.
 Sudden change of temperature shall be avoided, deterioration of the characteristics can occur.
 Be careful of soldering temperature and duration of components when soldering.
 Do not place soldering iron on the body of components.
 Be careful not to subject the terminals or leads of components to excessive force.
 SAW devices are electrostatic sensitive. Please avoid static voltage during operation and storage.
 Ultrasonic cleaning shall be avoided. Ultrasonic vibration may cause destruction of components.
Test Circuit
Recommended Land Pattern
50Ω / 50Ω Configuration
Packing Information
Carrier Tape
Reel Dimensions
Outer Packing
Type
Quantity
Dimension
Description
Weight
Carton Box
10000
190×190×95
0.85
Carton Box Ⅱ
20000
190×190×190
anti-static plastic bag & carton box
1 reel / bag
5 bags / box (10000 pcs)
10 bags / box (20000 pcs)
Unit: mm
1.70
Unit: kg
Recommended Soldering Profile
1.
2.
The specifications of this device are subject to change or obsolescence without notice.
Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility
of the equipment manufacturer.
Similar pages