Lumileds LXML-PB01-0018 Luxeon rebel and luxeon rebel es color portfolio Datasheet

LUXEON Rebel and
LUXEON Rebel ES
Color Portfolio
Illuminating
your creativity
Technical Datasheet DS68
LUXEON® Rebel and LUXEON® Rebel ES
Color Portfolio
Introduction
With leading light output, color stability, flux density, and clear saturated colors, the
LUXEON® Rebel Color Portfolio of emitters is ideal for a wide variety of lighting,
signaling, signage and entertainment applications. Every LUXEON Rebel Color Portfolio
emitter has built-in quality, reliability, lumen maintenance and the ease of manufacturing
needed to create a superior high quality light.
Using the information in this document you can begin designing applications to your
unique specifications.
Use LUXEON Rebel Color Portfolio to
• deliver more usable light and higher flux density
• optimize applications to reduce size and cost
• tightly pack the LEDs for color mixing
• engineer more robust applications
• utilize standard FR4 PCB technology
• simplify manufacturing through the use of surface mount technology
• recognized under the Component Recognition Program of Underwriters
Laboratories Inc. UL listing E327436.
Table of Contents
General Product Information......................................................................................................................................3
Product Nomenclature........................................................................................................................................3
Average Lumen Maintenance Characteristics................................................................................................3
Environmental Compliance.................................................................................................................................3
Flux and Efficacy Performance Characteristics.......................................................................................................4
Flux Performance, Binning, and Supportability...............................................................................................5
Optical Characteristics.................................................................................................................................................6
Electrical Characteristics..............................................................................................................................................7
Absolute Maximum Ratings................................................................................................................................8
JEDEC Moisture Sensitivity.................................................................................................................................8
Reflow Soldering Characteristics...............................................................................................................................9
Mechanical Dimensions: LUXEON Rebel Color Emitter.................................................................................. 10
Mechanical Dimensions: LUXEON Rebel ES Royal-Blue Emitter.................................................................... 11
Pad Configuration....................................................................................................................................................... 12
Solder Pad Design.............................................................................................................................................. 12
Wavelength Characteristics...................................................................................................................................... 13
Typical Light Output Characteristics over Temperature.................................................................................... 14
Typical Forward Current Characterisics............................................................................................................... 15
Typical Relative Luminous Flux................................................................................................................................ 16
Current Derating Curves.......................................................................................................................................... 18
Typical Radiation Patterns......................................................................................................................................... 21
Typical Radiation Patterns......................................................................................................................................... 24
Typical Chromaticity Characteristics PC Amber................................................................................................. 25
Emitter Pocket Tape Packaging................................................................................................................................. 26
Emitter Reel Packaging.............................................................................................................................................. 27
Product Binning and Labeling................................................................................................................................... 28
Luminous Flux Bins..................................................................................................................................................... 29
Forward Voltage Bins.................................................................................................................................................. 30
Color Bins..................................................................................................................................................................... 31
Color Bins PC Amber....................................................................................................................................... 33
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
2
General Product Information
Product Nomenclature
LUXEON Rebel color emitters are tested and binned at 350 mA with the exception of LUXEON Rebel ES royal-blue emitters which are tested and
binned at 700 mA.
The part number designation is explained as follows:
L X M L -A B C D - E F G H
L X M 2 -A B C D - E F G H
L X M 3 -A B C D - E F G H
Where:
A — designates radiation pattern (value P for lambertian)
B — designates color (see LUXEON Rebel color binning and labeling section)
C — designates color variant (0 for color variants)
D — designates test current (value 1 for 350 mA; 2 for 700 mA.)
E — reserved for future product offerings
FGH — minimum luminous flux (lm) or radiometric power (mW) performance
Therefore products tested and binned at 350 mA or 700 mA follow the part numbering scheme:
LXML-Px01-xxxx
LXML-Px02-xxxx
LXM2-Px01-xxxx
LXM3-Px01-xxxx
Average Lumen Maintenance Characteristics
LUXEON Rebel color emitters are tested and binned at 350 mA and LUXEON Rebel ES royal-blue at 700 mA, with current pulse duration of
20 ms. All characteristic charts where the thermal pad is kept at constant temperature (25ºC typically) are measured with current pulse duration
of 20 ms. Under these conditions, junction temperature and thermal pad temperature are the same.
Philips Lumileds projects that green, cyan, blue and all royal-blue LUXEON Rebel color products will deliver, on average, 70% lumen maintenance
(B50, L70) at 50,000 hours of operation at a forward current of 700 mA. This projection is based on constant current operation with junction
temperature maintained at or below 135°C. Red, red-orange and amber LUXEON Rebel color products will also deliver, on average, 70% lumen
maintenance (B50, L70) at 50,000 hours of operation at a forward current of 350 mA and is based on constant current operation with junction
temperature maintained at or below 110°C. LUXEON Rebel PC amber delivers, on average, 70% lumen maintenance (L70) at 50,000 hours of
operation at a forward current of up to 700 mA. This projection is based on constant current operation with junction temperature maintained
at or below 130°C.
This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal
LUXEON Rebel reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen
maintenance.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Rebel and LUXEON
Rebel ES color products are compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely REACH and the RoHS directive. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel Color
Portfolio: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
3
Flux and Efficacy Performance Characteristics
Luminous Flux Characteristics for LUXEON Rebel Color Portfolio, Thermal Pad Temperature =25°C
Table 1.
Min Luminous
Typ Efficacy
Min Luminous
Typ Luminous
Typ Efficacy
Flux (lm)
Typ
(lm/W) or
Flux (lm)
Flux (lm) or
(lm/W) or
Part
or Radiometric
Flux
Radiant Efficacy
or Radiometric
Radiometric
Radiant Efficacy
Color
Number
Power (mW)
for Royal-Blue
Power (mW)
Power (mW)
for Royal-Blue
and Deep Red
and Deep Red
Performance @ 350 mA
Performance @ 700 mA
Green
Cyan
LXML-PM01-0100
LXML-PM01-0090
LXML-PM01-0080
LXML-PM01-0070
LXML-PE01-0080
LXML-PE01-0070
Blue
Royal-Blue
Deep Red
LXML-PE01-0060
60
67
66
LXML-PB01-0040
40.0
41
38
LXML-PB01-0030
30.0
35
33
LXML-PB01-0023
23.5
28
26
LXML-PB01-0018
18.1
22
21
LXML-PR01-0500
500 mW
520 mW
48%
LXML-PR01-0425
425 mW
480 mW
44%
LXML-PR02-1100*
1100 mW
*
LXML-PR02-1050
1050 mW
LXML-PR02-1000*
1000 mW
LXML-PR02-0950*
950 mW
*
LXML-PR02-0900 900 mW
LXML-PR02-0800*
800 mW
LXM3-PD01-0350
350 mW
360 mW
46%
LXM3-PD01-0300
300 mW
320 mW
41%
LXM3-PD01-0260
260 mW
290 mW
37%
LXM2-PD01-0050
50
53
72
LXM2-PD01-0040
40
48
65
LXML-PD01-0050
50
52
53
LXML-PD01-0040
40
46
47
LXML-PD01-0030
30
38
37
LXM2-PH01-0070
70
72
98
LXM2-PH01-0060
60
67
91
LXML-PH01-0060
60
62
63
LXML-PH01-0050
50
56
57
LXM2-PL01-0090
90
91
85
LXM2-PL01-0080
80
84
79
LXM2-PL01-0070
70
78
73
LXM2-PL01-0060
60
69
65
LXML-PL01-0060
60
61
60
LXML-PL01-0050
50
54
51
LXML-PL01-0040
40
48
46
LXML-PL01-0030
30
38
37
Red
Red-Orange
PC Amber
Amber
100
90
80
70
80
70
102
95
88
79
83
76
100
93
86
78
81
75
161
150
139
125
133
122
68
63
58
52
56
51
110
70
58
48
38
910 mW
840 mW
1120 mW
1070 mW
1030 mW
970 mW
940 mW
890 mW
720 mW
640 mW
580 mW
102
90
85
75
62
134
122
100
90
164
151
140
124
98
84
77
61
46
29
24
20
16
40%
37%
53%
51%
49%
46%
44%
42%
42%
38%
34%
63
56
35
30
24
83
76
40
35
73
68
63
55
39
33
30
24
* All LUXEON Rebel color emitters except royal-blue emitters are tested and binned for dominant wavelength. Royal-blue emitters are tested and binned using peak wavelength.
LUXEON Rebel ES royal-blue emitters are tested and binned at 700 mA.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
4
Luminous Flux Characteristics for LUXEON Rebel Color Portfolio,
Continued
Notes for Table 1:
1. Minimum luminous flux or radiometric power performance guaranteed within published operating conditions. Philips Lumileds maintains a
tolerance of ± 6.5% on flux and power measurements.
2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions.
Flux Performance, Binning, and Supportability
Volume
LEDs are produced with semiconductor technology that is subject to process variation, yielding a range of flux performance that is approximately
Gaussian in nature. In order to provide customers with fine granularity within the overall flux distribution, Philips Lumileds separates LEDs into
fixed, easy to design with, minimum luminous flux bins. To verify supportability of parts chosen for your application design, please consult your
Philips Lumileds or Future Lighting Solutions sales representative.
Luminous Flux Bins
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
5
Optical Characteristics
LUXEON Rebel Color Portfolio at Test Current [1]
Thermal Pad Temperature = 25°C
Table 2.
Typical
[2]
Dominant Wavelength lD ,
Spectral
or Peak Wavelength [3] lP
Half-width[4]
(nm)
Color
Min.
Typ.
Max.
Dl1/2
Typical
Temperature
Coefficient of
Dominant
Wavelength
(nm/°C)
DlD/ DTJ
Typical
Total
Included
Angle [5]
(degrees)
u0.90V
Typical
Viewing
Angle [6]
(degrees)
2u 1/2
Green [7]
520.0 nm
530.0 nm
550.0 nm
30
0.05
160
125
[7]
Cyan
490.0 nm
505.0 nm
520.0 nm
30
0.04
160
125
Blue [7]
460.0 nm
470.0 nm
490.0 nm
20
0.05
160
125
[3] [7]
Royal-Blue
440.0 nm
447.5 nm
460.0 nm
20
0.04
160
125
Red [8]
620.0 nm
627.0 nm
645.0 nm
20
0.05
160
125
Deep Red [8]
650.0 nm
655.0 nm
670.0 nm
20
0.05
160
125
Red-Orange [8]
610.0 nm
617.0 nm
620.0 nm
20
0.08
160
125
Amber [8]
584.5 nm
590.0 nm
597.0 nm
20
0.10
160
125
PC Amber [7]
588.0 nm
591.0 nm
592.0 nm
80
0.10
160
120
Notes for Table 2:
1. LXML-PR01-XXXX, LXM2-PL01-XXXX and LXM3-PD01-XXXX emitters are tested at 350 mA, LXML-PR02-XXXX emitters are tested
at 700 mA.
2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color.
Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements.
3. Royal-blue product is binned by radiometric power and peak wavelength rather than photometric lumens.
Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements.
4. Spectral width at ½ of the peak intensity.
5. Total angle at which 90% of total luminous flux is captured.
6. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
7. PC amber, green, cyan, blue and royal-blue products are built with Indium Gallium Nitride (InGaN).
8. All red, deep red, red-orange, and amber are built with Aluminum Indium Gallium Phosphide (AlInGaP).
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
6
Electrical Characteristics
Electrical Characteristics at 350 mA for LUXEON Rebel color,
Thermal Pad Temperature = 25ºC
Table 3.
Typical Temperature
Forward Voltage Vf [1]
Coefficient of Forward
Part
(V)Voltage [2] (mV/°C)
Color
Number
Min.
Typ.
Max.
DVf / DTJ
Typical Thermal
Resistance Junction to
Thermal Pad (°C/W)
Ru J-C
Green
Cyan
Blue
LXML-PM01
LXML-PE01
LXML-PB01
2.55
2.55
2.55
2.90
2.90
3.03
3.51
3.51
3.51
- 2.0 to - 4.0
- 2.0 to - 4.0
- 2.0 to - 4.0
10
10
10
Royal-Blue
Red
Red
Deep Red
Red-Orange
Red-Orange
PC Amber
Amber
LXML-PR01
LXML-PD01
LXM2-PD01
LXM3-PD01
LXML-PH01
LXM2-PH01
LXM2-PL01
LXML-PH01
2.55
2.31
1.80
1.80
2.31
1.80
2.55
2.31
3.03
2.90
2.10
2.20
2.90
2.10
3.05
2.90
3.51
3.51
2.80
2.80
3.51
2.80
3.51
3.51
- 2.0 to - 4.0
- 2.0 to - 4.0
- 2.0 to - 4.0
- 2.0 to - 4.0
- 2.0 to - 4.0
- 2.0 to - 4.0
- 2.0 to - 4.0
- 2.0 to - 4.0
10
12
8
8
12
8
10
12
Electrical Characteristics at 700 mA for LUXEON Rebel ES Royal-Blue,
Thermal Pad Temperature = 25°C
Royal-Blue
LXML-PR02
2.50
3.00
3.50
Notes for Table 3:
1. LUXEON Rebel ES royal-blue measured between 25°C = Tj = 110°C and If = 700 mA.
2. Measured between 25°C = TJ = 110°C at If = 350 mA.
3. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
- 2.0 to - 4.0
6
Typical Electrical Characteristics at 700 mA for LUXEON Rebel color,
Thermal Pad Temperature = 25ºC
Table 4.
Color
Part Number
Typical Forward Voltage Vf (V)
Green
Cyan
Blue
Royal-Blue
Royal-Blue
Red
Red
Deep Red
Red-Orange
Red-Orange
PC Amber
Amber
LXML-PM01
LXML-PE01
LXML-PB01
LXML-PR02
LXML-PR01
LXML-PD01
LXM2-PD01
LXM3-PD01
LXML-PH01
LXM2-PH01
LXM2-PL01
LXML-PH01
3.25
3.25
3.30
3.00
3.25
3.60
2.30
2.40
3.60
2.30
3.20
3.60
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
7
Absolute Maximum Ratings
Table 5.
Parameter
Green/Cyan/
Blue/Royal-Blue
LUXEON Rebel ES
Royal-Blue
Red/Deep-Red
Red-Orange/Amber
DC Forward Current (mA)
1000
1000
700
Peak Pulsed Forward
1000
1200
700
Current (mA)
Average Forward Current (mA)
1000
1000
700
ESD Sensitivity
< 8000V Human Body Model (HBM) Class 3A JESD22-A114-B
PC Amber
700
700
700
LED Junction Temperature [1]
150°C
150°C
135°C
130°C
Operating Case Temperature
-40°C - 135°C
-40°C - 135°C
-40°C - 120°C
-40°C - 110°C
at 350 mA
Storage Temperature
-40°C - 135°C
-40°C - 135°C
-40°C - 135°C
-40°C - 135°C
Soldering Temperature
JEDEC 020c 260°C
JEDEC 020c 260°C
JEDEC 020c 260°C
JEDEC 020c 260°C
Allowable Reflow Cycles
3
3
3
3
Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum
Reverse Voltage (Vr)
LUXEON Rebel Color Portfolio LEDs are not designed to be driven in reverse bias.
Notes for Table 5:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. The maximum rating for LUXEON Rebel ES royal-blue is 1200 mA with peak pulsed forward current not to exceed 60 seconds.
JEDEC Moisture Sensitivity
Table 6.
Soak Requirements
Level Floor Life
Standard
Time Conditions
Time
Conditions(hours)
1
unlimited [ 30°C /
85% RH
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
168
+ 5 / -0
85°C / 85%
RH
8
Reflow Soldering Characteristics
JEDEC 020c
Table 7.
Profile Feature
Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp)
3°C / second max
Preheat Temperature Min (Tsmin)
150°C
Preheat Temperature Max (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 - 180 seconds
Temperature TL (tL)
217°C
Time Maintained Above Temperature TL (tL)
60 - 150 seconds
Peak / Classification Temperature (TP)
260°C
Time Within 5°C of Actual Peak Temperature (tP)
20 - 40 seconds
Ramp-Down Rate
6°C / second max
Time 25°C to Peak Temperature
8 minutes max
Note for Table 7:
- All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
9
Mechanical Dimensions: LUXEON Rebel Color Emitter
3.17
2.93
2.10
1.85
1.67
1.38
0.11
0.05
4.61
4.37
0.68
0.52
1.67
1.38
2.61
2.49
R 0.14
0.06
1.26
1.14
0.46
0.34
0.73
0.61
1.86
1.74
1.83
1.71
2.86
2.74
Figure 1. Package outline drawing.
Notes for Figure 1:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
10
Mechanical Dimensions: LUXEON Rebel ES
Royal-Blue Emitter
2.10
1.85
3.17
2.93
0.11
0.05
1.67
1.38
2.31
2.25
1.67
1.38
0.86
0.74
0.83
0.54
0.84
0.72
∅
0.68
0.52
0.88
0.72
0.14
R 0.06
2.61
2.49
0.21
R 0.09
1.26
1.14
4.61
4.37
0.14
R 0.06
0.46
0.34
0.73
0.61
1.86
1.74
1.83
1.71
2.86
2.74
Figure 2. Package outline drawing.
Notes for Figure 2:
- To avoid damage, do not handle the device by the emitter lens.
- Drawings not to scale.
- All dimensions are in millimeters.
- The thermal pad is electrically isolated from the anode and cathode contact pads.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
11
Pad Configuration
3
1
3
2
TOP
2
1
BOTTOM
PAD
FUNCTION
1
CATHODE
2
ANODE
3
THERMAL
Figure 3. Pad configuration.
Note for Figure 3:
- The thermal pad is electrically isolated from the anode and cathode contact pads.
Solder Pad Design
Figure 4. Solder pad layout.
Notes for Figure 4:
- The photograph shows the recommended LUXEON Rebel Color Portfolio layout on printed circuit board (PCB). This design easily achieves a
thermal resistance of 7K/W.
- Application Brief AB32 provides extensive details for this layout. The .dwg files are available at www.philipslumileds.com and
www.philipslumileds.cn.com.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
12
Wavelength Characteristics
Green, Cyan, Blue, all Royal-Blue, Red, Red-Orange and Amber
at Test Current, Thermal Pad Temperature = 25°C
Relative Spectral Power
Distribution
1.0
0.8
0.6
Cyan
Royal
Blue
RedOrange
Green
Blue
Deep
Red
Amber
0.4
Red
0.2
0.0
400
500
450
600
550
650
700
Wavelength (nm)
Figure 5. Relative intensity vs. wavelength.
PC Amber at Test Current, Thermal Pad Temperature = 25°C
Re
elative Spectral Powe
er Distributtion
1.0
0.8
06
0.6
04
0.4
02
0.2
00
0.0
460
510
560
610
660
710
760
Wavelength (nm)
Figure 6. Relative intensity vs. wavelength.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
13
Typical Light Output Characteristics over Temperature
Cyan, Blue and Royal-Blue and LUXEON Rebel ES Royal-Blue
at Test Current
1.2
Relativ
ve Luminous/Radiant Flux
1.1
1.0
0.9
0.8
Blue (LXML-PB01) Photometric
0.7
Green (LXML-PM01) & Cyan (LXMLPE01) Photometric
ES Royal Blue (LXML-PR02) & Royal
Blue (LXML-PR01) Radiometric
0.6
0.5
-20
0
20
40
60
80
100
120
140
Thermal Pad Temperature (°C)
LXML-PR02 values are based on 700 mA drive current.
*
Figure 7. Relative light output vs. thermal pad temperature for cyan, blue, royal-blue and LUXEON Rebel ES royal-blue.
Red, Deep Red, Red-Orange and Amber at Test Current
1.75
Red (LXML-PD01 & LXM2-PD01)
Red-orange (LXML-PH01 & LXM2-PH01)
1.50
Relativ
ve Luminous Flux Output
Amber (LXML-PL01)
PC Amber (LXM2-PL01)
Deep Red (LXM3-PD01)
1.25
1.00
0.75
0.50
0.25
0.00
-20
0
20
40
60
80
100
Thermal Pad Temperature (°C)
Figure 8. Relative light output vs. thermal pad temperature for red, deep red, red-orange and amber.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
14
Typical Forward Current Characterisics
Green, Cyan, Blue, Royal-Blue and LUXEON Rebel ES Royal-Blue
Thermal Pad Temperature = 25ºC
1600
LUXEON Rebel ES royal-blue LXML-PR02
1400
Green LXML-PM01, cyan LXML-PE01, &
royal-blue LXML-PR01
Fo
orward Current (mA)
1200
Blue LXML-PB01
1000
800
600
400
200
0
2.6
2.8
3
3.2
3.4
3.6
Forward Voltage (V)
Figure 9. Forward current vs. forward voltage for green, cyan, blue and royal-blue.
Red, Deep Red, Red-Orange, Amber and PC Amber
Thermal Pad Temperature = 25ºC
1000
Red (LXM2-PD01) & Red Orange (LXM2PH01)
Red (LXML-PD01), Red-orange (LXMLPH01) & Amber (LXML-PL01)
PC Amber (LXM2-PL01)
900
Forrward Current (mA)
800
Deep Red (LXM3-PD01)
700
600
500
400
300
200
100
0
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
3.8
Forward Voltage (V)
Figure 10. Forward current vs. forward voltage for red, deep red, red-orange, amber, and PC amber.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
15
Typical Relative Luminous Flux
Typical Relative Luminous Flux vs. Forward Current for LUXEON Rebel
ES Royal-Blue, Thermal Pad Temperature = 25ºC
2
1.8
Relative Radiant Flux
1.6
1.4
1.2
1
0.8
LUXEON Rebel ES
royal-blue LXML-PR02
0.6
04
0.4
0.2
0
0
200
400
600
800
1000
1200
1400
1600
Forward Current (mA)
Figure 11. Relative luminous flux or radiometric power vs. forward current for LUXEON Rebel ES royal-blue at Thermal Pad = 25ºC maintained.
Typical Relative Luminous Flux vs. Forward Current for Green, Cyan,
Blue and Royal-Blue, Thermal Pad Temperature = 25ºC
2.50
Normalized Luminous / Radiant Flux
2.25
2.00
1.75
1.50
1.25
1.00
0.75
0 75
royal-blue LXML-PR01 radiometric
0.50
Blue photometric LXML-PB01
0.25
Green LXML-PM01 cyan LXML-PE01
photometric
0.00
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 12. Relative luminous flux or radiometric power vs. forward current for green, cyan,
blue and royal-blue at Thermal Pad = 25ºC maintained.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
16
Typical Relative Luminous Flux vs. Forward Current for
Red, Deep Red, Red-Orange, Amber, Thermal Pad Temperature = 25ºC
Normalized Lum
minous Flux/Radiometric Power
2.00
1.75
1.50
1.25
1.00
0.75
Red (LXM2-PD01) & Red-orange (LXM2PH01)
0.50
Red (LXML-PD01), Red-orange (LXMLPH01) & Amber (LXML-PL01)
Deep Red (LXM3-PD01)
0.25
0.00
0
100
200
300
400
500
600
700
800
Forward Current (mA)
Figure 13. Relative luminous flux vs. forward current for red, deep red,
red-orange and amber at Thermal Pad = 25ºC maintained.
Typical Relative Luminous Flux, PC Amber Thermal Pad
Temperature = 25ºC
2.00
1.75
Relatiive Luminious Flux
1.50
1.25
1.00
0.75
0.50
0.25
0.00
0 00
0
100
200
300
400
500
600
700
Forward Current (mA)
Figure 14. Relative luminous flux vs. forward current for PC amber LXML-PL02 emitters.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
17
Current Derating Curves
Current Derating Curve for 350 mA Drive
Current for Red, Red-Orange, Amber
400
400
350
350
300
300
IF - Forward Current (mA)
mA)
IF - Forward
ward Current (mA)
Current Derating Curve for 350 mA Drive
Current for Green, Cyan, Blue and Royal-Blue
250
15°C/W
200
25°C/W
150
35°C/W
100
45°C/W
250
15°C/W
200
25°C/W
150
35°C/W
100
45°C/W
50
50
0
0
0
25
50
75
100
125
150
175
0
25
TA - Ambient Temperature (°C)
50
75
100
125
TA - Ambient Temperature (°C)
Figure 15. Maximum forward current vs. ambient temperature,
Figure 16. Maximum forward current vs. ambient temperature,
based on TJMAX = 135ºC, red LXML-PD01,
LXML-PB01 & royal-blue LXML-PR01 emitters.
red-orange LXML-PH01 & amber LXML-PL01 emitters.
Current Derating Curve for 350 mA Drive
Current for Red, Deep-Red and Red-Orange
Current Derating Curve for 350 mA Drive
Current for PC Amber
400
400
350
350
ForwardCurrent
Current (mA
(mA)
IIFF--Forward
IF - Forw
ward Current (mA)
based on TJMAX = 150ºC, green LXML-PM01, cyan LXML-PE01, blue
300
250
15°C/W
200
25°C/W
35°C/W
35
C/W
150
150
45°C/W
100
300
250
15 o C/W
200
25 o C/W
35 o C/W
45 o C/W
150
100
Below recommended minimum DC Forward Current (100 mA)
50
50
0
0
25
50
75
100
125
TA - Ambient Temperature (°C)
150
0
20
40
60
80
100
120
140
- Ambient Temperature Co
TT
A A- Ambient Temperature ( C)
Figure 17. Maximum forward current vs. ambient temperature,
Figure 18. Maximum forward current vs. ambient temperature,
based on TJMAX = 135ºC, red LXM2-PD01, deep red LXM3-PD01
based on TJMAX = 130ºC, PC amber LXM2-PL01 emitters.
& red-orange LXM2-PH01 emitters.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
18
Current Derating Curves
Current Derating Curve for 700 mA Drive
Current for LUXEON Rebel ES Royal-Blue
800
800
700
700
IF - Forward Current mA
IF - Forward Current (mA)
Current Derating Curve for 700 mA Drive
Current for Green, Cyan, Blue and Royal-Blue
600
500
15°C/W
400
25°C/W
300
35°C/W
200
600
500
1 °C/W
15°C/W
400
25°C/W
300
35°C/W
200
100
100
0
0
0
25
50
75
100
125
150
0
175
25
50
75
100
125
150
175
TA - Ambient Temperature °C
TA - Ambient Temperature (°C)
Figure 19. Maximum forward current vs. ambient temperature,
Figure 20. Maximum forward current vs. ambient temperature,
based on TJMAX = 150ºC, green LXML-PM01, cyan LXML-PE01, blue
based on TJMAX = 150ºC, royal-blue LXML-PR02 emitters.
LXML-PB01 & royal-blue LXML-PR01 emitters..
Current Derating Curve for 700 mA Drive
Current for Red, Deep Red and Red-Orange
800
800
700
700
600
600
IF - Foward Current (mA)
IF - Forward Current (mA)
mA)
Current Derating Curve for 700 mA Drive
Current for Red, Red-Orange, Amber
500
15°C/W
400
25°C/W
300
35°C/W
200
100
500
400
15°C/W
25°C/W
300
35°C/W
45°C/W
200
100
0
0
25
50
75
100
125
150
0
0
25
50
75
100
125
150
TA - Ambient Temperature (°C)
TA - Ambient Temperature (°C)
Figure 21. Maximum forward current vs. ambient temperature,
Figure 22. Maximum forward current vs. ambient temperature,
based on TJMAX = 135ºC, red LXML-PD01, red-orange LXML-PH01
based on TJMAX = 135ºC, red LXM2-PD01, deep red LXM3-PD01
& amber LXML-PL01 emitters.
& red-orange LXM2-PH01 emitters.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
19
Current Derating Curves
Current Derating Curve for 700 mA
Drive
Current for PC Amber
Current Derating Curve for 700 mA Drive Current
800
700
IF - Forward Current mA
600
500
15 o C/W
25 o C/W
400
35 o C/W
45 o C/W
300
200
100
Below recommended minimum DC Forward Current (100 mA)
0
20.00
40.00
60.00
80.00
100.00
120.00
140.00
TA - Ambient Temperature (oC)
Figure 23. Maximum forward current vs. ambient temperature,
based on TJMAX = 130ºC, PC amber LXM2-PL01 emitters.
Current Derating Curve for 1000 mA Drive
Current for LUXEON Rebel ES Royal-Blue
1200
1200
1000
1000
IF - Forward
ard Current mA
IF - Forward Current (mA)
A)
Current Derating Curve for 1000 mA Drive
Current for Green, Cyan, Blue and Royal-Blue
800
600
15°C/W
400
25°C/W
200
800
600
15°C/W
400
25°C/W
200
0
0
25
50
75
100
125
150
175
TA - Ambient Temperature (°C)
0
0
25
50
75
100
125
150
175
TA - Ambient Temperature °C
Figure 24. Maximum forward current vs. ambient temperature,
Figure 25. Maximum forward current vs. ambient temperature,
based on TJMAX = 135ºC, green LXML-PM01, cyan LXML-PE01, blue
based on TJMAX = 150ºC, royal-blue LXML-PR02 emitters.
LXML-PB01 & royal-blue LXML-PR01.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
20
Typical Radiation Patterns
Typical Spatial Radiation Pattern for Green,
Cyan, Blue, Royal-Blue and LUXEON Rebel ES Royal-Blue Lambertian
100%
90%
80%
Relative Inten
nsity %
70%
60%
50%
LUXEON Rebel ES royal-blue
LXML-PR02
40%
green LXML-PM01, cyan
LXML-PE01, blue LXML-PB01 &
royal-blue LXML-PR01
30%
20%
10%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angular Displacement (deg)
Figure 26. Typical spatial radiation pattern for green, cyan, blue, royal-blue and LUXEON Rebel ES royal-blue lambertian.
Typical Polar Radiation Pattern for Green, Cyan,
Blue, Royal-Blue and LUXEON Rebel ES Royal-Blue Lambertian
0°
‐30°
30°
60°
‐60°
‐1.0
‐0.8
‐0.6
‐0.4
‐0.2
0.0
0.2
0.4
0.6
0.8
1.0
LUXEON Rebel ES royal‐blue LXML‐PR02
green LXML‐PM01, cyan LXML‐PE01, blue
LXML‐PB01 & royal‐blue LXML‐PR01
Figure 27. Typical polar radiation pattern for green, cyan, blue, royal-blue and LUXEON Rebel ES royal-blue lambertian.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
21
Typical Spatial Radiation Pattern for
Red, Red-Orange and Amber Lambertian
100%
90%
80%
Relative
R
Intensity %
70%
60%
50%
40%
30%
red LXM2 -PD01 & red-orange
LXM2-PH01
20%
red LXML-PD01, red-orange
LXML-PH01 & amber LXML-PL01
10%
0%
-90
-75
-60
-45
-30
-15
0
15
30
45
60
75
90
Angular Displacement deg
Figure 28. Typical spatial radiation pattern for red, red-orange and amber lambertian.
Typical Polar Radiation Pattern for
Red, Red-Orange and Amber Lambertian
0°
‐30°
30°
60°
‐60°
‐1.0
‐0.8
‐0.6
‐0.4
‐0.2
0.0
0.2
0.4
0.6
0.8
1.0
red LXM2‐PD01 & red‐orange LXM2‐PH01
red LXML‐PD01, red‐orange
LXML‐PH01 & amber LXML‐PL01
Figure 29. Typical polar radiation pattern for red, red-orange and amber lambertian.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
22
Typical Spatial Radiation Pattern for Deep Red Lambertian
120%
Relative In
ntensity (%
%)
100%
80%
60%
40%
20%
Deep Red (LXM3-PD01)
0%
-90
-60
-30
0
30
60
90
Angular Displacement (deg)
Figure 30. Typical spatial radiation pattern for deep red lambertian.
Typical Polar Radiation Pattern for Deep Red Lambertian
0°
100
30°
-30°
80
60
-60°
60
60°
60
40
20
-90°
90°
0
Deep Red (LXM3-PD01)
-120°
-150°
-150
120°
150°
150
180°
Figure 31. Typical polar radiation pattern for deep red lambertian.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
23
Typical Radiation Patterns
Typical Spatial Radiation Pattern PC Amber
1.2
1.0
Relative
lative Intensity
0.8
0.6
0.4
0.2
0.0
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement (degrees)
Figure 32. Typical representative spatial radiation pattern, PC amber LXM2-PL01 emitters.
Typical Polar Radiation Pattern PC Amber
Figure 33. Typical polar radiation pattern, PC amber LXM2-PL01 emitters.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
24
Typical Chromaticity Characteristics PC Amber
Typical Chromaticity Characteristics over Temperature
0.010
0.008
0.006
0.004
x,
x, y
0.002
0.000
Dx

-0.002
Dy

-0.004
-0.006
-0.008
-0.010
-40
-20
0
20
40
60
80
100
120
140
Forward Current (mA)
Figure 34. Chromaticity coordinate vs. thermal pad temperature. Test current: 350 mA.
Typical Chromaticity Characteristics over Forward Current
Thermal Pad Temperature = 25 ºC
0.004
0.003
0 002
0.002
x, y
0.001
0.000
-0.001
Dx
 at 25C
-0.002
Dy
 at 25C
-0.003
-0.004
0
200
400
600
800
1000
1200
Forward Current (mA)
Figure 35. Chromaticity coordinate vs. forward current.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
25
Emitter Pocket Tape Packaging
20
1000
50
Figure 36. Emitter pocket tape packaging.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
26
Emitter Reel Packaging
Figure 37. Emitter reel packaging.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
27
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets.
For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (Vf).
Decoding Product Bin Labeling
LUXEON Rebel Color Portfolio emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters
packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes, it is possible to
determine optimum mixing and matching of products for consistency in a given application.
Format of Labeling for Emitters
Reels of green, cyan, blue, royal-blue, red, red-orange, amber and PC amber emitters are labeled with a three digit alphanumeric CAT code following
the format below.
ABC
A = Flux bin (J, K, L, M etc.)
B = Color bin (2, 4, 6 etc.)
C = Vf bin (D, E, F, G etc.)
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
28
Luminous Flux Bins
Tables 8, 9 and 10 list the standard photometric luminous flux/radiometric power bins for LUXEON Rebel and LUXEON Rebel ES color emitters
(tested and binned at 350 mA and 700 mA respectively). Although several bins are outlined, product availability in a particular bin varies by
production run and by product performance. Not all bins are available in all colors.
Table 8.
Bin Code
D
E
F
G
H
J
K
L
M
N
P
Q
R
Bin Code
D
E
F
G
H
J
K
Y
A
B
M
Flux Bins All Colors (except Royal-Blue)
Minimum Flux (lm)
18.1
23.5
30
40
50
60
70
80
90
100
120
140
160
Maximum Flux (lm)
23.5
30
40
50
60
70
80
90
100
120
140
160
180
Table 9.
LUXEON Rebel Royal-Blue and LUXEON Rebel ES Royal-Blue
Minimum Radiometric Flux (mW)
Maximum Radiometric Flux (mW)
350
425
425
500
500
600
600
700
700
800
800
900
900
950
950
1000
1000
1050
1050
1100
1100
1200
Bin Code
C
D
E
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
Table 10.
LUXEON Rebel Deep Red
Minimum Radiometric Flux (mW)
260
300
350
Maximum Radiometric Flux (mW)
300
350
400
29
Forward Voltage Bins
The following forward voltage bins include the minimum and maximum Vf bin values for the emitter. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance.
Table 11. Applicable for LXML-PXX1 emitters tested at 350 mA.
Vf Bins
Bin Code
A
B
C
D
E
Minimum Forward Voltage
(V)
Maximum Forward Voltage
(V)
2.31
2.55
2.79
3.03
3.27
2.55
2.79
3.03
3.27
3.51
Table 12. Applicable for LXML-Pxx2 emitters tested at 700 mA.
Minimum Forward Voltage
Maximum Forward Voltage
Bin Code
(V)
(V)
P
R
S
T
2.50
2.75
3.00
3.25
2.75
3.00
3.25
3.50
Table 13. Applicable for LXM2-PXX1 and LXM3-PD01 (Deep Red) emitters tested at 350 mA.
Bin Code
Minimum Forward Voltage
(V)
V
1.80
W
2.00
X
2.20
Y
2.40
Z
2.60
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
Maximum Forward Voltage
(V)
2.00
2.20
2.40
2.60
2.80 30
Color Bins
Green, cyan and blue LUXEON Rebel color emitters are tested and binned for dominant wavelength.
Dominant Wavelength Bin Structure for Green Emitters
Table 14.
Bin Code
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 1
2
3
4
5
520
525
530
535
540
525
530
535
540
545
6
545
550
Dominant Wavelength Bin Structure for Cyan Emitters
Table 15.
Bin Code
1
2
3
4
5
6
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 490
495
500
505
510
515
495
500
505
510
515
520
Dominant Wavelength Bin Structure for Blue Emitters
Table 16.
Bin Code
1
2
3
4
5
6
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 460
465
470
475
480
485
465
470
475
480
485
490
Royal-blue LUXEON Rebel and LUXEON Rebel ES emitters are tested and binned for peak wavelength.
Peak Wavelength Bin Structure for Royal-Blue and LUXEON Rebel ES Royal-Blue Emitters
Table 17.
Bin Code
3
4
5
6
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
Minimum PeakWavelength
(nm)
Maximum Peak Wavelength
(nm) 440
445
450
455
445
450
455
460
31
Red, deep red, red-orange and amber LUXEON Rebel color emitters are tested and binned for dominant wavelength.
Dominant Wavelength Bin Structure for Red Emitters
Table 18.
Bin Code
4
5
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 620.0
630.0
630.0
645.0
Dominant Wavelength Bin Structure for Red-Orange Emitters
Table 19.
Bin Code
2
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 610.0
620.0
Dominant Wavelength Bin Structure for Amber Emitters
Table 20.
Bin Code
1
2
4
6
7
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 584.5
587.0
589.5
592.0
594.5
587.0
589.5
592.0
594.5
597.0
Dominant Wavelength Bin Structure for Deep Red Emitters
Table 21.
Bin Code
6
7
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
Minimum Dominant Wavelength
(nm)
Maximum Dominant Wavelength
(nm) 650
660
660
670
32
Table 22.
PC Amber Bin Coordinates
Bin Code
x
y
0.5622
0.5576
0.5775
0.5843
0.5705
0.5775
0.5576
0.4372
0.4326
0.4132
0.4151
0.4111
0.4132
0.4326
0.5499
Note for Table 22:
0.4249
2
4
-
LUXEON Rebel PC amber emitters are tested and binned by x,y coordinates.
Color Bins PC Amber
0.460
0.450
0.440
587.8nm
0.430
y
4
2
0.420
591.6nm
0.410
0.400
0.390
0.380
0.530
0.540
0.550
0.560
0.570
0.580
0.590
0.600
0.610
x
Figure 38. Color bin structure.
LUXEON Rebel Color Porfolio Datasheet DS68 20110819
33
Company Information
Philips Lumileds is a leading provider of power LEDs for everyday lighting applications. The company’s records for light output,
efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology
and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for
power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting,
shop lighting, home lighting, digital imaging, display and automotive lighting.
Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and
white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in
San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is
dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s
LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com.
www.philipslumileds.com
www.philipslumileds.cn.com
www.futurelightingsolutions.com
For technical assistance or the
location of your nearest sales
office contact any of the
following:
North America:
1 888 589 3662
[email protected]
©2011 Philips Lumileds Lighting Company. All rights reserved.
Product specifications are subject to change without notice.
LUXEON is a registered trademark of the Philips Lumileds
Lighting Company in the United States and other countries.
Europe:
00 800 443 88 873
[email protected]
Asia Pacific:
800 5864 5337
[email protected]
Japan:
800 5864 5337
[email protected]
Similar pages