Diodes AH175-WL-7-B Hall effect latch for high temperature Datasheet

AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
General Description
Features
•
•
•
•
•
•
•
AH175 is a single-digital-output Hall-effect sensor for high
temperature operation. The device includes an on-chip Hall
voltage generator for magnetic sensing, an amplifier to amplify
Hall voltage, and a comparator to provide switching hysteresis for
noise rejection, and an open-collector output pre-driver. An
internal band-gap regulator is used to provide temperature
compensated supply voltage for internal circuits and allows a
wide operating supply range.
Bipolar Hall Effect Latch Sensor
3.5V to 20V DC Operation Voltage
Open Collector Pre-Driver
25mA Output Sink Current
Chip Power Reverse-Connection Protection
o
o
Operating Temperature: -40 C~150 C
Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
Lead Free Packages: SIP-3L, SC59-3L
Green Package: SC59-3L
•
•
While the magnetic flux density (B) is larger than threshold Bop,
the OUT pin turns on (low). If B removed toward Brp, the OUT pin
is latched “on” state prior to B < Brp. When B < Brp, the OUT pin
goes into “off ” state.
Applications
•
•
•
•
Rotor Position Sensing
Current Switch
Encoder
RPM Detection
Ordering Information
AH175 - X X X - X
Package
P: SIP-3L
W: SC59-3L
Note:
1.
L : Lead Free
G : Green (Note 3)
Magnetic
Characteristics
A or B
- 7 : Taping
-B : Bulk (Note 4)
-A : Ammo Box (Note 5)
RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
Lead-free
Packing
Lead-Free
Tube/Bulk
Package Packaging Quantity
Part
Code
(Note 2)
Number
Suffix
AH175-P
P
SIP-3L
AH175-W
W
SC59-3L
7” Tape and Reel
Quantity
Part
Number
Suffix
Ammo Box
Quantity
Part
Number
Suffix
1000
-B
NA
NA
4000/Box
-A
NA
NA
3000/Tape & Reel
-7
NA
NA
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
3. Green is only available for SC59-3L
4. Bulk is for SIP-3 Straight Lead.
5. Ammo Box is for SIP-3 Spread Lead.
AH175 Rev. 4
1 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Pin Assignment
Pin Description
(Top View)
Name
Description
VCC
GND
Input Power
2. GND
1. VCC
OUT
Output Stage
3. OUT
Ground
(SIP-3L package)
3. OUT
GND 2.
1. VCC
(SC59-3L Package)
Block Diagram
VCC
1
REG.
3
OUT
AMP
2 GND
AH175 Rev. 4
2 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Absolute Maximum Ratings
(TA = 25°C)
Parameter
Supply Voltage
Output “OFF ” Voltage
Output “ON” Current
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
Power Dissipation
Symbol
Rating
Unit
VCC
Vout (off)
Io (sink)
Top
Tstg
Tj
20
20
25
-40~+150
-65~+150
+150
550
230
V
V
mA
°C
°C
°C
mW
mW
SIP-3L
SC59-3L
PD
Recommended Operating Conditions
Parameter
Supply Voltage
Symbol
VCC
Electrical Characteristics
Parameter
Output Saturation Voltage
Supply Current
Conditions
Operating
Vout (SAT)
Magnetic Characteristics
Unit
V
(TA = 25°C)
Symbol
ICC
Rating
3.5 ~ 20
Conditions
VCC = 12V, OUT ”ON”
Io = 10mA
VCC = 12V, OUT ”OFF”
Min.
Typ.
Max.
Unit
-
300
400
mV
-
3.5
6
mA
(TA = 25°C, VCC = 12V)
(1mT = 10 Gauss)
A grade
Operation Point
Release Point
Hysteresis
B grade
Operation Point
Release Point
Hysteresis
AH175 Rev. 4
Symbol
Bop
Brp
Bhy
Min.
15
-60
30
Typ.
80
Max.
60
-15
120
Unit
Gauss
Gauss
Gauss
Symbol
Bop
Brp
Bhy
Min.
5
-80
10
Typ.
80
Max.
80
-5
160
Unit
Gauss
Gauss
Gauss
3 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Operating Characteristics
(Output Voltage)
Vout
S
S
Marking side
Marking side
Vcc
Vd
High
Bhy
Low
N
N
( SC59 )
(SIP3)
VSAT
Brp
0
Bop
(Magnetic Flux Density)
Performance Characteristics (SIP-3L)
25
550
105
198
TA (°C)
PD (mW)
TA (°C)
PD (mW)
50
440
110
176
P D (m W )
60
396
115
154
70
352
120
132
80
308
125
110
85
286
130
88
90
264
135
66
95
242
140
44
100
220
150
0
P o w e r D is s ip a tio n C u rv e
600
500
400
300
200
100
0
0
25
50
75
100
125
150
T A (oC )
AH175 Rev. 4
4 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Performance Characteristics (SC59-3L)
TA (°C)
25
50
60
70
80
90
100
110
120
125
130
140
150
PD (mW)
230
184
166
147
129
110
92
74
55
46
37
18
0
P D (m W )
P o w e r D is s ip a tio n C u rv e
300
200
100
0
0
25
50
75
100
125
150
T A (oC )
Marking Information
(1) SC59-3L
(Top View)
3
XX : J5: AH175
Y : Year 0~9
XX Y M X
1
2
M : Month A~L
X : Internal code a~z: Lead Free
A~Z: Green
Part Number Package
ATS137
SC59-3L
Identification
Code
JA
(2) SIP3-3L
(Top View)
175
Y WW X
Y : Year: “1”=2001
“2”=2002
WW: Nth Week 01~52
X : Internal code
a~z: Lead Free
AH175 Rev. 4
5 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Package Information
(1) Package Type: SIP-3L for Bulk pack
0.51m m
NO M
2.00m m
1.15m m
BRANDED
SURFACE
Active Area D epth
1
2
3
Sensor Location
Package Dimension
AH175 Rev. 4
6 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Package Information (Continued)
(2) Package Type: SIP-3L for Ammo pack
AH175 Rev. 4
7 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
AH175
HALL EFFECT LATCH FOR HIGH TEMPERATURE
Package Information (Continued)
(3) Package Type: SC59-3L
TOP VIEW
1.50/
1.70
0.35/0.50
2.70/
3.00
1.90
2.90/3.10
1.00/
1.30
0.013/0.10
0.10/0.20
0.95
0.35/0.55
0°/8°
Sensor Location
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
AH175 Rev. 4
8 of 8
www.diodes.com
FEBRUARY 2007
© Diodes Incorporated
Similar pages