TECHNICAL DATA SHEET CM23-1.9 Commercial Module for CATV & SLED Applications RoHS EU Compliant TYPICAL PERFORMANCE VALUES Hot Side Temperature (°C) ∆ Tmax (°C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27°C 71 3.4 1.9 2.8 1.23 85°C 92 4.1 1.8 3.5 -- MECHANICAL CHARACTERISTICS ORDERING OPTIONS Model Number CM23-1.9-01AC CM23-1.9-04AC CM23-1.9-05AC CM23-1.9-06AC CM23-1.9-07AC CM23-1.9-08AC CM23-1.9-09AC Description Metallized Exterior 146°C Pretinned Exterior 138°C Pretinned Exterior 138°C /183°C Pretinned Exterior 138°C Pretinned Exterior and 2 sides encapsulated 118°C /183°C Pretinned Exterior 118°C /183°C Pretinned Exterior with Teflon Sleeving. PRODUCT FEATURES RoHS 2002/95/EC Compliant. CM23-1.9-06AC, -08AC and -09AC are not RoHS Compliant. All dimensions are millimeters. Marlow reserves the right to make product changes without notice. Au flash exterior, suitable for soldering. AlO ceramics Minimum order quantity of 20 pieces. Maximum process temperature is 220°C. For customer support or general questions please contact a local office or visit our website at www.marlow.com. DOC # 102-0353 REV G - PAGE 1 OF 2 ENVIRONMENT: ONE ATMOSPHERE DRY NITROGEN Hot Side Temperature 27°C Hot Side Temperature 85°C TA = 85°C - Vacuum TA = 27°C - Vacuum Heat Load (W) 100.0 Load (W) 100.0 0.00 80.0 0.50 80.0 0.00 0.50 1.00 40.0 1.50 1.00 60.0 T (°C) T (°C) 60.0 1.50 2.00 40.0 2.50 2.00 20.0 3.00 20.0 2.50 3.50 3.00 0.0 4.00 0.0 0.0 0.4 0.8 1.2 1.6 2.0 0.0 4.0 4.0 3.5 3.5 3.0 Voltage (VDC) Voltage (VDC) TYPICAL PERFORMANCE CURVES Heat Q=0 2.5 2.0 1.5 1.0 T = 0 0.5 3.0 0.4 0.8 1.2 1.6 2.0 Q=0 2.5 2.0 1.5 T = 0 1.0 0.5 0.0 0.0 0.0 0.4 0.8 1.2 1.6 2.0 0.0 Current (amps) 0.4 0.8 1.2 1.6 2.0 Current (amps) For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, contact one of our Applications Engineers at 877-627-5691. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. CONTACT US: For customer support or general questions please contact a local office below or visit our website at www.marlow.com. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas 75238-1645 214-340-4900 (tel) 214-341-5212 (fax) 877-627-5691 (tech support) www.marlow.com Marlow Industries Europe GmbH Brunnenweg 19-21 64331 Weiterstadt Germany Tel.: +49 (0) 6150 5439 - 403 Fax: +49 (0) 6150 5439 - 400 [email protected] II-VI Japan Inc. WBG Marive East 17F 2-6 Nakase, Mihama-ku Chiba-Shi, Chiba 261-7117 Japan 81 43 297 2693 (tel) 81 43 297 3003 (fax) [email protected] www.ii-vi.co.jp II-VI Singapore Pte., Ltd. Blk. 5012, Techplace II #04-07 & 05-07/12, Ang Mo Kio Ave. 5 Singapore 569876 (65) 6481 8215 (tel) (65) 6481 8702 (fax) [email protected] www.ii-vi.com.sg Marlow Industries China, II-VI Technologies Beijing A subsidiary of II-VI Incorporated Rm 202, 1# Lize 2nd Middle Road Wangjing, Chaoyang District Beijing 100102 China 010-64398226 ext 105 (tel) 010-64399315 (fax) [email protected] DOC # 102-0353 REV G - PAGE 2 OF 2