CEP15A03/CEB15A03 N-Channel Enhancement Mode Field Effect Transistor PRELIMINARY FEATURES 30V, 190A, RDS(ON) = 4.5mΩ @VGS = 10V. Super high dense cell design for extremely low RDS(ON). High power and current handing capability. D Lead free product is acquired. TO-220 & TO-263 package. D G S CEB SERIES TO-263(DD-PAK) G G D S ABSOLUTE MAXIMUM RATINGS Parameter CEP SERIES TO-220 Tc = 25 C unless otherwise noted Symbol Limit 30 Units V VGS ±20 V ID 190 A IDM 760 A 200 W Drain-Source Voltage VDS Gate-Source Voltage Drain Current-Continuous Drain Current-Pulsed S a Maximum Power Dissipation @ TC = 25 C PD - Derate above 25 C 1.3 W/ C Single Pulsed Avalanche Energy d EAS 405 mJ Single Pulsed Avalanche Current d IAS TJ,Tstg 52 A -55 to 175 C Symbol Limit Units Thermal Resistance, Junction-to-Case RθJC 0.75 C/W Thermal Resistance, Junction-to-Ambient RθJA 62.5 C/W Operating and Store Temperature Range Thermal Characteristics Parameter This is preliminary information on a new product in development now . Details are subject to change without notice . 1 Rev 2. 2010.June http://www.cetsemi.com CEP15A03/CEB15A03 Electrical Characteristics Parameter Tc = 25 C unless otherwise noted Symbol Test Condition Min Drain-Source Breakdown Voltage BVDSS VGS = 0V, ID = 250µA 30 Zero Gate Voltage Drain Current IDSS Gate Body Leakage Current, Forward Gate Body Leakage Current, Reverse Typ Max Units VDS = 40V, VGS = 0V 25 µA IGSSF VGS = 20V, VDS = 0V 100 nA IGSSR VGS = -20V, VDS = 0V -100 nA 4 V 4.5 mΩ Off Characteristics V On Characteristics b Gate Threshold Voltage Static Drain-Source On-Resistance Forward Transconductance VGS(th) VGS = VDS, ID = 250µA 2 RDS(on) VGS = 10V, ID = 70A 3.8 gFS VDS = 25V, ID = 70A 30 S 3350 pF 1570 pF 245 pF Dynamic Characteristics c Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss VDS = 25V, VGS = 0V, f = 1.0 MHz Switching Characteristics c Turn-On Delay Time td(on) Turn-On Rise Time tr Turn-Off Delay Time td(off) VDD = 28V, ID = 10A, VGS = 10V, RGEN = 4.5Ω 30 60 ns 21 42 ns 84 168 ns Turn-Off Fall Time tf 39 78 ns Total Gate Charge Qg 114.7 179 nC Gate-Source Charge Qgs Gate-Drain Charge Qgd VDS = 32V, ID = 70A, VGS = 10V 14.5 nC 47.3 nC Drain-Source Diode Characteristics and Maximun Ratings Drain-Source Diode Forward Current IS Drain-Source Diode Forward Voltage b VSD VGS = 0V, IS = 70A Notes : a.Repetitive Rating : Pulse width limited by maximum junction temperature b.Pulse Test : Pulse Width < 300µs, Duty Cycle < 2%. c.Guaranteed by design, not subject to production testing. d.L = 0.3mH, IAS = 52A, VDD = 25V, RG = 25Ω, Starting TJ = 25 C 2 190 A 1.3 V CEP15A03/CEB15A03 240 120 VGS=6V 90 VGS=5V 60 30 0 0 0.5 1 1.5 2 2.5 3 2 4 6 8 10 Figure 1. Output Characteristics Figure 2. Transfer Characteristics RDS(ON), Normalized RDS(ON), On-Resistance(Ohms) Ciss 3300 2200 Coss 1100 Crss 0 5 10 15 20 25 2.6 2.2 ID=70A VGS=10V 1.8 1.4 1.0 0.6 0.2 -100 -50 0 50 100 150 200 VDS, Drain-to-Source Voltage (V) TJ, Junction Temperature( C) Figure 3. Capacitance Figure 4. On-Resistance Variation with Temperature VDS=VGS ID=250µA 1.1 1.0 0.9 0.8 0.7 0.6 -50 0 VGS, Gate-to-Source Voltage (V) IS, Source-drain current (A) C, Capacitance (pF) VTH, Normalized Gate-Source Threshold Voltage TJ=125 C 60 VDS, Drain-to-Source Voltage (V) 4400 1.2 120 -55 C 5500 1.3 180 0 6600 0 25 C VGS=10,9,8,7V 150 ID, Drain Current (A) ID, Drain Current (A) 180 -25 0 25 50 75 100 125 150 VGS=0V 10 1 10 0 10 -1 0.4 0.6 0.8 1.0 1.2 1.4 TJ, Junction Temperature( C) VSD, Body Diode Forward Voltage (V) Figure 5. Gate Threshold Variation with Temperature Figure 6. Body Diode Forward Voltage Variation with Source Current 3 10 VDS=32V ID=70A 10 8 ID, Drain Current (A) VGS, Gate to Source Voltage (V) CEP15A03/CEB15A03 6 4 2 0 0 30 60 90 RDS(ON)Limit 100ms 10 2 10 1 1ms 10ms DC 10 120 3 TC=25 C TJ=175 C Single Pulse 0 10 -1 10 0 10 1 10 Qg, Total Gate Charge (nC) VDS, Drain-Source Voltage (V) Figure 7. Gate Charge Figure 8. Maximum Safe Operating Area VDD t on RL V IN D VGS RGEN toff tr td(on) td(off) tf 90% 90% VOUT VOUT 10% INVERTED 10% G 90% S VIN 50% 50% 10% PULSE WIDTH Figure 10. Switching Waveforms r(t),Normalized Effective Transient Thermal Impedance Figure 9. Switching Test Circuit 10 0 D=0.5 0.2 10 10 PDM 0.1 -1 0.05 0.02 0.01 Single Pulse t1 1. RθJC (t)=r (t) * RθJC 2. RθJC=See Datasheet 3. TJM-TC = P* RθJC (t) 4. Duty Cycle, D=t1/t2 -2 10 -2 t2 10 -1 10 0 10 1 10 2 Square Wave Pulse Duration (msec) Figure 11. Normalized Thermal Transient Impedance Curve 4 10 3 10 4 2