Fairchild MOC8105 Phototransistor optocoupler Datasheet

CNY171, CNY172, CNY173, CNY174, CNY17F1, CNY17F2,
CNY17F3, CNY17F4, MOC8101, MOC8102, MOC8103,
MOC8104, MOC8105, MOC8106, MOC8107, MOC8108
Phototransistor Optocouplers
Features
Applications
■ CNY171/2/3/4 and CNY17F1/2/3/4 are also available in
white package by specifying M suffix (eg. CNY17F2M)
■ UL recognized (File # E90700)
■ VDE recognized
– Add option V for white package (e.g., CNY17F2VM)
– File #102497
– Add option ‘300’ for black package (e.g., CNY17F2300)
– File #94766
■ Current transfer ratio in select groups
■ High BVCEO—70V minimum (CNY17X/M, CNY17FX/M,
MOC8106/7/8)
■ Closely matched current transfer ratio (CTR) minimizes unitto-unit variation.
■ Very low coupled capacitance along with no chip to pin 6
base connection for minimum noise susceptability
(CNY17FX/M, MOC810X)
■
■
■
■
■
White Package (-M Suffix)
Black Package (No -M Suffix)
Power supply regulators
Digital logic inputs
Microprocessor inputs
Appliance sensor systems
Industrial controls
Description
The CNY17, CNY17F and MOC810X devices consist of a
Gallium Arsenide IRED coupled with an NPN phototransistor
in a dual in-line package.
6
6
6
6
1
1
1
1
6
6
1
1
Schematic
ANODE 1
CATHODE 2
NC 3
ANODE 1
6 NC
CATHODE 2
5 COLLECTOR
NC 3
4 EMITTER
CNY17F1/2/3/4
CNY17F1M/2M/3M/4M
MOC8101/2/3/4/5/6/7/8
©2004 Fairchild Semiconductor Corporation
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
6 BASE
5 COLLECTOR
4 EMITTER
CNY171/2/3/4
CNY17F1M/2M/3M/4M
1
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
October 2005
Parameters
Symbol
Device
Value
Units
Storage Temperature
TSTG
M
-40 to +150
°C
non M
-55 to +150
Operating Temperature
TOPR
M
-40 to +100
Lead Solder Temperature
TSOL
TOTAL DEVICE
Total Device Power Dissipation @ 25°C (LED plus detector)
non M
-55 to +100
All
260 for 10 sec
°C
M
250
mW
non M
250
PD
Derate Linearly From 25°C
°C
M
2.94
non M
3.30
mW/°C
M
60
non M
100
All
6
V
M
1.5
A
non M
1.0
EMITTER
Continuous Forward Current
IF
Reverse Voltage
VR
Forward Current - Peak (1 µs pulse, 300 pps)
IF (pk)
LED Power Dissipation 25°C Ambient
PD
Derate Linearly From 25°C
mA
M
120
non M
150
mW
M
1.41
non M
1.8
mW/°C
IC
All
50
mA
Collector-Emitter Voltage
VCEO
CNY17X/M, CNY17FX/M,
MOC8106/7/8
70
V
MOC8101/2/3/4/5
30
V
Emitter Collector Voltage
VECO
All
7
V
mW
DETECTOR
Continuous Collector Current
Detector Power Dissipation @ 25°C
PD
Derate Linearly from 25°C
M
150
non M
150
M
1.76
non M
2.0
mW/°C
Electrical Characteristics (TA = 25°C Unless otherwise specified.)(1)
Individual Component Characteristics
Parameters
Test Conditions
Symbol
Device
Min
Typ
Max
Units
VF
CNY17FX/M
CNY17X/M
1.0
1.35
1.65
V
MOC810X
1.0
1.15
1.50
EMITTER
Input Forward Voltage
IF = 60 mA
Capacitance
VF = 0 V, f = 1.0 MHz
IF = 10 mA
Reverse Leakage Current VR = 6 V
CJ
All
18
IR
All
0.001
2
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
pF
10
µA
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Absolute Maximum Ratings
Parameters
Test Conditions
Symbol
Device
Min
Typ
Max
Units
DETECTOR
Breakdown Voltage
Collector to Emitter
MOC8101/2/3/4/5
30
100
IC = 1.0 mA, IF = 0
BVCEO
MOC8106/7/8
CNY17F1/2/3/4/M
CNY171/2/3/4/M
70
100
Collector to Base
IC = 10 µA, IF = 0
BVCBO
CNY171/2/3/4/M
70
120
Emitter to Collector
All
7
10
V
IE = 100 µA, IF = 0
BVECO
Leakage Current
Collector to Emitter
VCE = 10 V, IF = 0
ICEO
All
Collector to Base
VCB = 10 V, IF = 0
ICBO
CNY171/2/3/4/M
Capacitance
Collector to Emitter
VCE = 0, f = 1 MHz
CCE
All
8
pF
Collector to Base
VCB = 0, f = 1 MHz
CCB
CNY171/2/3/4/M
20
pF
Emitter to Base
VEB = 0, f = 1 MHz
CEB
CNY171/2/3/4/M
10
pF
1
50
nA
20
nA
Isolation Characteristics
Characteristic
Input-Output Isolation Voltage
Test Conditions
Symbol
f = 60 Hz, t = 1 min. (4)
VISO
f = 60 Hz, t = 1 sec. (4)
Device
Min
Typ** Max
Units
Black Package
5300
Vac(rms)*
‘M’ White Package
7500
Vac(pk)
1011
Ω
Isolation Resistance
VI-O = 500 VDC (4)
RISO
All
Isolation Capacitance
VI-O = Ø, f = 1 MHz (4)
CISO
Black Package
0.5
‘M’ White Package
0.2
pF
Note
* 5300 Vac(rms) for 1 minute equates to approximately 9000 Vac (pk) for 1 second
** Typical values at TA = 25°C
3
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Individual Component Characteristics (Continued)
DC Characteristics
Test Conditions Symbol Min
Typ
Max
Units
—
80
%
Coupled
Output Collector
Current
MOC8101
(IF = 10 mA, VCE = 10 V)
(CTR)(2)
MOC8102
73
—
117
MOC8103
108
—
173
MOC8104
160
—
256
MOC8105
65
—
133
MOC8106
50
—
150
MOC8107
100
—
300
250
—
600
40
—
80
MOC8108
CNY17F1/1M
(IF = 10 mA, VCE = 5 V)
CNY17F2/2M
63
—
125
CNY17F3/3M
100
—
200
CNY17F4/4M
160
—
320
CNY171/1M
40
—
80
CNY172/2M
63
—
125
CNY173/3M
100
—
200
160
—
320
—
—
0.4
V
—
—
0.3
V
CNY174/4M
Collector-Emitter
Saturation Voltage
50
CNY17XM/FXM
(IC = 2.5 mA, IF = 10 mA)
MOC8101/2/3/4/5/
6/7/8
(IC = 500 µA, IF = 5.0 mA)
CNY17X/FX
(IF = 10 mA, IC = 2.5 mA)
AC Characteristics(3)
VCE(sat)
Test Conditions Symbol Min
Typ* Max
Units
Non-Saturated Switching Time
Turn-On Time
Turn-Off Time
MOC8101/2/3/4/5
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)
ton
—
2
20
MOC8106/7/8
—
CNY17X/FX
10
MOC8101/2/3/4/5
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)
toff
—
3
20
MOC8106/7/8
—
CNY17X/FX
10
Delay Time
CNY17XM/FXM
Rise Time
All Devices
(IF = 10 mA, VCC = 5 V, RL = 75 Ω)
td
—
—
5.6
µs
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)
tr
—
1
—
µs
—
—
4.0
—
—
4.1
CNY17XM/FXM
(IF = 10 mA, VCC = 5 V, RL = 75 Ω)
Storage Time
CNY17XM/FXM
(IF = 10 mA, VCC = 5 V, RL = 75 Ω)
ts
Fall Time
All Devices
(IC = 2.0 mA, VCC = 10 V, RL = 100 Ω)
tf
CNY17XM/FXM
(IF = 10 mA, VCC = 5 V, RL = 75 Ω)
4
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
µs
—
2
—
—
—
3.5
µs
µs
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Transfer Characteristics (TA = 25°C Unless otherwise specified.)(1)
AC Characteristics(3)
Test Conditions Symbol
Min
Typ
Max Units
Saturated Switching Times
Turn-on Time
Rise Time
CNY171/F1
(IF = 20 mA, VCE = 0.4 V)
CNY172/F2
CNY173/F3
CNY174/F4
(IF = 10 mA, VCE = 0.4 V)
ton
CNY171/F1
(IF = 20 mA, VCE = 0.4 V)
—
—
4.0
CNY172/F1
CNY173/F3
CNY174/F4
(IF = 10 mA, VCE = 0.4 V)
—
—
6.0
tr
—
—
5.5
—
—
8.0
CNY171M/F1M
(IF = 20 mA, VCC = 5 V, RL = 1 KΩ)
—
—
4.0
CNY172M/3M/4M
CNY17F2M/F3M/F4M
(IF = 10 mA, VCC = 5 V, RL = 1 KΩ)
—
—
6.0
CNY171M/F1M
(IF = 20 mA, VCC = 5 V, RL =1 KΩ)
—
—
5.5
—
—
8.0
Delay Time
CNY172M/3M/4M
CNY17F2M/F3M/F4M
(IF = 10 mA, VCC = 5 V, RL =1 KΩ)
td
CNY171/F1
(IF = 20 mA, VCE = 0.4 V)
toff
CNY172/F2
CNY173/F3
CNY174/F4
(IF = 10 mA, VCE = 0.4 V)
CNY171/F1
(IF = 20 mA, VCE = 0.4 V)
—
—
20
CNY172/F2
CNY173/F3
CNY174/F4
(IF = 10 mA, VCE = 0.4 V)
—
—
24
Turn-off Time
Fall Time
tf
—
—
34
—
—
39
µs
µs
µs
µs
µs
CNY171M/F1M
(IF = 20 mA, VCC = 5V, RL = 1KΩ)
—
—
20.0
CNY172M/3M/4M
CNY17F2M/F3M/F4M
(IF = 10 mA, VCC = 5V, RL = 1KΩ)
—
—
24.0
µs
CNY171M/F1M
(IF = 20 mA, VCC = 5V, RL = 1KΩ)
—
—
34.0
µs
—
—
39.0
Storage Time
CNY172M/3M/4M
CNY17F2M/F3M/F4M
(IF = 10 mA, VCC = 5V, RL = 1KΩ)
ts
** All typicals at TA = 25°C
Notes:
1. Always design to the specified minimum/maximum electrical limits (where applicable).
2. Current Transfer Ratio (CTR) = IC/IF x 100%.
3. For test circuit setup and waveforms, refer to Figures 20.
4, For this test, Pins 1 and 2 are common, and Pins 4 are 5 are common.
5
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Transfer Characteristics (continued) (TA = 25°C Unless otherwise specified.)(1)
Fig.2 Normalized CTR vs. Forward Current
(White Package)
1.4
1.6
VCE = 5.0V
TA = 25˚C
Normalized to
IF = 10 mA
VCE = 5.0V
TA = 25˚C
1.4
1.2
Normalized to
IF = 10 mA
1.2
1.0
NORMALIZED CTR
NORMALIZED CTR
1.0
0.8
0.6
0.4
0.2
0.8
0.6
0.4
0.2
0.0
0.0
0
5
10
15
20
0
2
IF - FORWARD CURRENT (mA)
4
6
8
10
Fig. 3 Normalized CTR vs. Ambient Temperature
(Black Package)
16
18
20
1.4
1.4
1.2
IF = 5 mA
IF = 5 mA
1.2
1.0
NORMALIZED CTR
NORMALIZED CTR
14
Fig. 4 Normalized CTR vs. Ambient Temperature
(White Package)
1.6
IF = 10 mA
1.0
0.8
0.6
Normalized to
IF = 10 mA
TA = 25˚C
0.4
-75
-50
-25
IF = 10 mA
0.8
IF = 20 mA
0.6
0.4
IF = 20 mA
0
25
50
75
100
Normalized to
IF = 10 mA
TA = 25˚C
0.2
-60
125
TA - AMBIENT TEMPERATURE (˚C)
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
0.9
VCE= 5.0 V
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
IF = 5 mA
0.3
0.2
0.1
0.0
10
100
1000
20
0
40
60
80
100
1.0
0.9
IF = 20 mA
0.8
IF = 10 mA
0.7
IF = 5 mA
0.6
0.5
0.4
0.3
0.2
VCE= 5.0 V
0.1
0.0
10
RBE- BASE RESISTANCE (kΩ)
100
1000
RBE- BASE RESISTANCE (kΩ)
6
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
-20
Fig. 6 CTR vs. RBE (Unsaturated)
(White Package)
1.0
0.8
-40
TA - AMBIENT TEMPERATURE (˚C)
Fig. 5 CTR vs. RBE (Unsaturated)
(Black Package)
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
12
IF - FORWARD CURRENT (mA)
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Fig.1 Normalized CTR vs. Forward Current
(Black Package)
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
NORMALIZED CTR ( CTRRBE / CTRRBE(OPEN))
Fig. 8 CTR vs. RBE (Saturated)
(White Package)
1.0
0.9
0.8
VCE= 0.3 V
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
0.3
IF = 5 mA
0.2
0.1
0.0
10
100
1.0
0.9
0.8
VCE= 0.3 V
IF = 20 mA
0.7
0.6
IF = 10 mA
0.5
0.4
0.3
IF = 5 mA
0.2
0.1
0.0
1000
10
100
RBE- BASE RESISTANCE (k Ω)
Fig. 10 Switching Speed vs. Load Resistor
(White Package)
Fig. 9 Switching Speed vs. Load Resistor
(Black Package)
1000
1000
IF = 10 mA
VCC = 10 V
TA = 25˚C
100
100
SWITCHING SPEED - (µs)
SWITCHING SPEED - (µs)
IF = 10 mA
VCC = 10 V
TA = 25˚C
Toff
Tf
10
Ton
Tr
1
Toff
Tf
10
Ton
Tr
1
0.1
0.1
0.1
1
10
0.1
100
1
10
100
R-LOAD RESISTOR (kΩ)
R-LOAD RESISTOR (kΩ)
Fig. 12 Normalized ton vs. RBE
(White Package)
Fig. 11 Normalized ton vs. RBE
(Black Package)
5.0
4.5
NORMALIZED ton - (ton(RBE) / ton(open))
5.0
NORMALIZED ton - (ton(RBE) / ton(open))
1000
RBE- BASE RESISTANCE (k Ω)
VCC = 10 V
IC = 2 mA
RL = 100 Ω
4.0
3.5
3.0
2.5
2.0
1.5
1.0
4.5
VCC = 10 V
IC = 2 mA
RL = 100 Ω
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
10
100
1000
10000
10
100000
RBE- BASE RESISTANCE (k Ω)
1000
10000
100000
RBE- BASE RESISTANCE (k Ω)
7
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
100
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Fig. 7 CTR vs. RBE (Saturated)
(Black Package)
1.4
1.4
1.3
1.3
NORMALIZED toff - (toff(RBE) / toff(open))
NORMALIZED toff - (toff(RBE) / toff(open))
Fig. 14 Normalized toff vs. RBE
(White Package)
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
VCC = 10 V
IC = 2 mA
RL = 100 Ω
0.4
0.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
VCC = 10 V
IC = 2 mA
RL = 100 Ω
0.4
0.3
0.2
0.2
0.1
0.1
10
100
1000
10000
10
100000
100
RBE- BASE RESISTANCE (k Ω)
Fig. 15 LED Forward Voltage vs. Forward Current
(Black Package)
1.8
1.8
1.7
1.7
1.6
1.6
1.5
1.4
TA = -55°C
1.3
TA = 25°C
1.2
1.4
TA = -55°C
1.3
TA = 25°C
1.2
TA = 100°C
1.1
1.0
1
10
100
1
10
Fig. 18 Collector-Emitter Saturation Voltage vs Collector Current
(White Package)
VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
VCE (SAT) - COLLECTOR-EMITTER SATURATION VOLTAGE (V)
Fig. 17 Collector-Emitter Saturation Voltage vs Collector Current
(Black Package)
100
10
1
IF = 2.5 mA
0.1
IF = 10 mA
0.01
IF = 20 mA
IF = 5 mA
TA = 25˚C
0.1
1
10
100
TA = 25˚C
10
1
IF = 2.5 mA
0.1
IF = 20 mA
0.01
IF = 5 mA
0.001
0.01
IF = 10 mA
0.1
1
10
IC - COLLECTOR CURRENT (mA)
IC - COLLECTOR CURRENT (mA)
8
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
100
IF - LED FORWARD CURRENT (mA)
IF - LED FORWARD CURRENT (mA)
0.001
0.01
100000
1.5
TA = 100°C
1.1
1.0
10000
Fig. 16 LED Forward Voltage vs. Forward Current
(White Package)
VF - FORWARD VOLTAGE (V)
VF - FORWARD VOLTAGE (V)
1000
RBE- BASE RESISTANCE (k Ω)
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Fig. 13 Normalized toff vs. RBE
(Black Package)
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Fig. 19 Dark Current vs. Ambient Temperature
(Black Package)
ICEO - COLLECTOR-EMITTER DARK CURRENT (µA)
101
VCE = 10 V
100
10-1
10-2
10-3
10-4
10-5
10-6
0
25
50
75
100
125
TA - AMBIENT TEMPERATURE (°C)
VCC
INPUT PULSE
10%
IF
IC
INPUT
RL
OUTPUT PULSE
90%
ts
td
OUTPUT (VCE)
tr
ton
toff
Figure 21. Switching Time Test Circuit
Figure 20. Switching Time Test Circuit
9
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
tf
www.fairchildsemi.com
Package Dimensions (Through Hole)
Package Dimensions (Surface Mount)
0.350 (8.89)
0.330 (8.38)
PIN 1
ID.
3
2
PIN 1
ID.
1
0.270 (6.86)
0.240 (6.10)
SEATING PLANE
0.270 (6.86)
0.240 (6.10)
0.350 (8.89)
0.330 (8.38)
4
0.070 (1.78)
0.045 (1.14)
5
6
0.300 (7.62)
TYP
0.070 (1.78)
0.045 (1.14)
0.200 (5.08)
0.165 (4.18)
0.200 (5.08)
0.115 (2.92)
0.020 (0.51)
MIN
0.154 (3.90)
0.100 (2.54)
0.016 (0.41)
0.008 (0.20)
0.022 (0.56)
0.016 (0.41)
0.020 (0.51)
MIN
0.100 (2.54)
TYP
0.016 (0.40)
0.008 (0.20)
0.022 (0.56)
0.016 (0.41)
0.315 (8.00)
MIN
0.405 (10.30)
MAX
0.300 (7.62)
TYP
0° to 15°
0.016 (0.40) MIN
Lead Coplanarity : 0.004 (0.10) MAX
0.100 (2.54)
TYP
Package Dimensions (0.4” Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
(Black Package Only)
PIN 1 ID
0.270 (6.86)
0.240 (6.10)
0.070 (1.78)
0.060 (1.52)
SEATING PLANE
0.350 (8.89)
0.330 (8.38)
0.070 (1.78)
0.045 (1.14)
0.415 (10.54)
0.295 (7.49)
0.200 (5.08)
0.135 (3.43)
0.154 (3.90)
0.100 (2.54)
0.100 (2.54)
0.030 (0.76)
0.016 (0.40)
0.008 (0.20)
0.004 (0.10)
MIN
0° to 15°
0.022 (0.56)
0.016 (0.41)
0.100 (2.54) TYP
0.400 (10.16)
TYP
NOTE
All dimensions are in inches (millimeters)
10
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Black Package (No -M Suffix)
Package Dimensions (Through Hole)
Package Dimensions (Surface Mount)
0.350 (8.89)
0.320 (8.13)
0.350 (8.89)
0.320 (8.13)
Pin 1 ID
Pin 1 ID
0.070 (1.77)
0.040 (1.02)
0.260 (6.60)
0.240 (6.10)
Seating Plane
SEATING PLANE
0.260 (6.60)
0.240 (6.10)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.200 (5.08)
0.115 (2.93)
0.070 (1.77)
0.040 (1.02)
0.320 (8.13)
0.014 (0.36)
0.010 (0.25)
0.200 (5.08)
0.115 (2.93)
0.100 (2.54)
0.015 (0.38)
0.012 (0.30)
0.008 (0.20)
0.025 (0.63)
0.020 (0.51)
0.020 (0.50)
0.016 (0.41)
0.100 (2.54)
15°
0.390 (9.90)
0.332 (8.43)
0.100 [2.54]
0.035 (0.88)
0.012 (0.30)
0.020 (0.50)
0.016 (0.41)
0.012 (0.30)
Package Dimensions (0.4” Lead Spacing)
Recommended Pad Layout for
Surface Mount Leadform
(White Package Only)
0.350 (8.89)
0.320 (8.13)
PIN 1 ID
0.070 (1.78)
0.260 (6.60)
0.240 (6.10)
0.060 (1.52)
SEATING PLANE
0.070 (1.77)
0.040 (1.02)
0.014 (0.36)
0.010 (0.25)
0.425 (10.79)
0.100 (2.54)
0.305 (7.75)
0.200 (5.08)
0.115 (2.93)
0.030 (0.76)
0.100 (2.54)
0.015 (0.38)
0.020 (0.50)
0.016 (0.41)
0.012 (0.30)
0.008 (0.21)
0.100 [2.54]
0.425 (10.80)
0.400 (10.16)
NOTE
All dimensions are in inches (millimeters)
11
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
White Package (-M Suffix)
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Ordering Information
Black Package Part
Number Example
(No Suffix)
White Package Part
Number Example
(M Suffix)
CNY171S
CNY171SM
CNY171SD
CNY171SR2M
CNY171W
CNY171TM
Description
Surface Mount Lead Bend
Surface Mount; Tape and reel
0.4" Lead Spacing
CNY171300
CNY171VM
CNY171300W
CNY171TVM
VDE Approved
VDE Approved, 0.4" Lead Spacing
CNY1713S
CNY171SVM
CNY1713SD
CNY171SR2VM
VDE Approved, Surface Mount
VDE Approved, Surface Mount, Tape & Reel
Carrier Tape Specifications (Black Package, No Suffix)
12.0 ± 0.1
4.85 ± 0.20
4.0 ± 0.1
0.30 ± 0.05
4.0 ± 0.1
Ø1.55 ± 0.05
1.75 ± 0.10
7.5 ± 0.1
13.2 ± 0.2
9.55 ± 0.20
0.1 MAX
10.30 ± 0.20
16.0 ± 0.3
Ø1.6 ± 0.1
User Direction of Feed
Carrier Tape Specifications (White Package, M Suffix)
12.0 ± 0.1
4.5 ± 0.20
2.0 ± 0.05
0.30 ± 0.05
4.0 ± 0.1
Ø1.5 MIN
1.75 ± 0.10
11.5 ± 1.0
21.0 ± 0.1
9.1 ± 0.20
0.1 MAX
10.1 ± 0.20
24.0 ± 0.3
Ø1.5 ± 0.1/-0
User Direction of Feed
12
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Marking Information (Black package non ‘M’ suffix)
1
CNY17-1
2
V XX YY K
6
3
4
5
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
Two digits year code, e.g., ‘03’; One digit year code for ‘M’
version, e.g. ‘5’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
Reflow Profile (Black Package, No Suffix)
Temperature (°C)
300
215°C, 10–30 s
250
225 C peak
200
150
Time above 183°C, 60–150 sec
100
50
• Peak reflow temperature: 225°C (package surface temperature)
• Time of temperature higher than 183°C for 60–150 seconds
• One time soldering reflow is recommended
Ramp up = 3C/sec
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
Time (Minute)
13
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
Marking Information (White package M suffix)
1
CNY17-1
2
V X YY Q
6
3
5
4
Definitions
1
Fairchild logo
2
Device number
3
VDE mark (Note: Only appears on parts ordered with VDE
option – See order entry table)
4
Single digit year code, e.g. ‘5’
5
Two digit work week ranging from ‘01’ to ‘53’
6
Assembly package code
Reflow Profile (White Package, M Suffix)
300
260°C
280
260
>245°C = 42 Sec
240
220
200
180
°C
Time above
183°C = 90 Sec
160
140
120
1.822°C/Sec Ramp up rate
100
80
60
40
33 Sec
20
0
0
60
120
180
270
360
Time (s)
14
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
FAST
ActiveArray™
FASTr™
Bottomless™
FPS™
Build it Now™
FRFET™
CoolFET™
GlobalOptoisolator™
CROSSVOLT™ GTO™
DOME™
HiSeC™
EcoSPARK™
I2C™
2
E CMOS™
i-Lo™
EnSigna™
ImpliedDisconnect™
FACT™
IntelliMAX™
FACT Quiet Series™
Across the board. Around the world.™
The Power Franchise
Programmable Active Droop™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
OCX™
OCXPro™
OPTOLOGIC
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench
QFET
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
SILENT SWITCHER
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic
TINYOPTO™
TruTranslation™
UHC™
UltraFET
UniFET™
VCX™
Wire™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
2. A critical component is any component of a life
1. Life support devices or systems are devices or
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. I16
15
CNY17X, CNY17FX, MOC810X Rev. 1.0.5
www.fairchildsemi.com
CNY17X, CNY17FX, MOC810X Phototransistor Optocouplers
TRADEMARKS