Surface Mount Bandpass Filter 50Ω CBP-804F+ 783 to 825 MHz The Big Deal • Excellent Rejection • High selectivity • Miniature shielded package CASE STYLE: KV1710 Product Overview CBP-804F+ is a ceramic-coaxial-resonator based bandpass filter in a shielded package fabricated using SMT technology. This filter offers sharp rejection for use in narrowband, radar and navigation systems. Key Features Feature Advantages High Selectivity The CBP-804F+ filter incorporates High-Q ceramic resonators that enables sharp rejection near passband. Low Passband VSWR This filter maintains typical VSWR over a passband frequency range making this filter easier to integrate into receiver and transmitter RF chains with less concerns for in band frequency ripple. Rugged construction The CBP-804+ has been qualified over wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles. Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 1 of 3 Surface Mount Bandpass Filter 50Ω CBP-804F+ 783 to 825 MHz CASE STYLE: KV1710 Features • Good rejection • High selectivity • Miniature shielded package Electrical Specifications at 25°C Parameter Center Frequency Insertion Loss VSWR Insertion Loss VSWR Insertion Loss VSWR Pass Band Applications Stop Band, Lower • Aeronautical radio navigation • Radar and navigation systems • Radio astronomy Stop Band, Upper F# Frequency (MHz) Min. Typ. Max. Unit - 783-825 783-825 DC-750 DC-750 860-1900 860-1900 20.0 804 2.0 1.3 31.9 20.0 30.2 20.0 3.5 1.92 MHz dB :1 dB :1 dB :1 F1-F2 F1-F2 DC-F3 DC-F3 F4-F5 F4-F5 20.0 - - Maximum Ratings Functional Schematic RF IN Operating Temperature Storage Temperature RF Power Input -40°C to 85°C -55°C to 100°C 5 W max. Permanent damage may occur if any of these limits are exceeded. RF OUT Typical Performance Data at 25°C Frequency (MHz) Typical Frequency Response FREQUENCY (MHz) F3 F1 F2 F4 F5 INSERTION LOSS (dB) CBP-804F+ INSERTION LOSS (Full band) Group Delay (nsec) CBP-804F+ INSERTION LOSS (Pass band) 0 INSERTION LOSS (dB) INSERTION LOSS (dB) +RoHS Compliant Frequency (MHz) 1 101.33 341.82 785 26.95 50 96.08 385.81 787 24.68 350 86.99 291.66 789 23.07 750 35.81 35.70 791 21.99 756 30.26 29.67 793 21.24 765 20.35 19.07 795 20.67 779 3.30 1.90 797 20.21 783 2.15 1.25 799 19.84 804 1.47 1.22 801 19.55 825 1.67 1.09 803 19.32 830 2.25 1.49 805 19.16 833 3.26 2.20 807 19.06 851 20.62 26.03 809 19.04 860 28.58 42.44 811 19.08 862 30.16 45.98 815 19.42 900 53.10 90.39 817 19.75 950 77.33 105.27 819 20.18 1250 60.40 92.62 821 20.76 1700 54.99 112.45 823 21.55 1900 49.21 99.36 825 22.58 0 The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications VSWR (:1) 30 60 90 120 5 10 15 1.40 1.80 20 2.20 783 0 475 950 1425 FREQUENCY (MHz) 1900 760 780 CBP-804F+ VSWR 10000 825 1.3 1.0 783 804 825 100 10 800 820 FREQUENCY (MHz) 840 860 CBP-804F+ GROUP DELAY 30 1.6 1000 VSWR 804 25 GROUP DELAY (ns) DC Insertion Loss (dB) 27 24 21 18 1 0 475 950 1425 FREQUENCY (MHz) 1900 783.0 793.5 804.0 814.5 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] 825.0 REV.A M151121 CBP-804F+ EDU2067/2 URJ 170109 Page 2 of 3 CBP-804F+ Bandpass Filter Pad Connections Outline Drawing INPUT 1 OUTPUT GROUND INDEX 12 2,3,4,5,6,7,8,9,10,11,13,14,15,16,17 17 16 15 14 13 1 12 2 11 B 3 10 4 Demo Board MCL P/N: TB-693+ Suggested PCB Layout (PL-378) 5 6 7 8 METALLIZATION SOLDER RESIST 9 C A D 4 5 6 7 8 9 3 10 2 L PCB Land Pattern T E Z 11 1 12 K X G U V S R Y F 17 16 15 14 13 W Q P Suggested Layout, Tolerance to be within ±.002 M N H Outline Dimensions ( inch mm ) A 1.050 26.67 B .875 22.23 C .239 6.07 D .125 3.18 E .160 4.06 F .160 4.06 G .278 7.06 H .205 5.21 J .160 4.06 K .070 1.78 L .150 3.81 P 1.090 27.69 Q .870 22.10 R .915 23.24 S .625 15.88 T .710 18.03 U .695 17.65 V .870 22.10 W .390 9.91 X .110 2.79 Y .070 1.78 Z .458 11.63 M .090 2.29 N .130 3.30 Wt. grams 8.5 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] Page 3 of 3