IRM-30
30W Single Output Encapsulated Type
series
Bauar t gepruft
Sicherheit
egel ma ge
od
o s
be wac
g
www.tuv.com
ID 2000000000
■ Features
Universal AC input / Full range
Compact size
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Isolation ClassⅡ
No load power consumption<0.1W
Pass LPS
100% full load burn-in test
High reliability
3 years warranty
■ Applications
Industrial electrical equipment
Mechanical equipment
Factory automation equipment
Hand-held electronic device
■ Description
IRM-30 is a 30W miniature (69.5*39*24mm) AC-DC module-type power supply, ready to be soldered onto
the PCB boards of various kinds of electronic instruments or industrial automation equipments. This product
allows the universal input voltage range of 85~264VAC. The 94V-0 flame retardant plastic case and
the fully-potted silicone enhance the heat dissipation and meet the anti-vibration demand up to 5G;
moreover, it provides the fundamental resistance to dust and moisture.
With the high efficiency up to 90% and the extremely low no-load power consumption below 0.1W, IRM-30
series fulfills the worldwide regulation for the low power consumption requirement for electronics. The entire
series is a Class Ⅱ design (no FG pin), incorporating the built-in EMI filtering components, enabling the
compliance with EN55022 Class B; the supreme EMC features keep the end electronic units from
electromagnetic interference. In addition to module-type model, IRM-30 series also offers the screw
terminal style model (ST).
■ Model Encoding
IRM - 30 - 5 ST
{
Blank : PCB mounting style
ST
: Screw terminal style
Output voltage
Output wattage
Series name
File Name:IRM-30-SPEC 2015-12-07
IRM-30
30W Single Output Encapsulated Type
series
SPECIFICATION
MODEL
OUTPUT
INPUT
IRM-30-5
IRM-30-12
IRM-30-15
IRM-30-24
IRM-30-48
DC VOLTAGE
5V
12V
15V
24V
48V
RATED CURRENT
6A
2.5A
2A
1.3A
0.63A
CURRENT RANGE
0 ~ 6A
0 ~ 2.5A
0 ~ 2A
0 ~ 1.3A
0 ~ 0.63A
RATED POWER
30W
30W
30W
31.2W
30.2W
RIPPLE & NOISE (max.) Note.2 120mVp-p
150mVp-p
200mVp-p
240mVp-p
300mVp-p
VOLTAGE TOLERANCE Note.3 ±2.5%
±2.5%
±2.5%
±2.5%
±2.5%
LINE REGULATION
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
LOAD REGULATION
±1.0%
±0.5%
±0.5%
±0.5%
±0.5%
SETUP, RISE TIME
1000ms, 30ms/230VAC
HOLD UP TIME (Typ.)
40ms/230VAC
VOLTAGE RANGE
85 ~ 264VAC
FREQUENCY RANGE
47 ~ 440Hz
88.5%
90%
EFFICIENCY (Typ.)
83%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
0.75A/115VAC
88%
88%
0.5A/230VAC
COLD START 25A/115VAC
< 0.25mA/240VAC
OVERLOAD
105% ~ 160% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
12.6 ~ 16.2V
15.75 ~ 20.25V
5.25 ~ 6.75V
Protection type : Shut off o/p voltage, clamping by zener diode
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
EMC
EMC EMISSION
EMC IMMUNITY
MTBF
DIMENSION
PACKING
NOTE
12ms/115VAC at full load
LEAKAGE CURRENT
PROTECTION
OTHERS
1500ms, 30ms/115VAC at full load
45A/230VAC
25.2 ~ 32.4V
50.4 ~ 64V
-30 ~ +70℃ (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85℃, 10 ~ 95% RH
±0.03%/℃ (0 ~ 50℃)
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level (surge L-N : 1KV), criteria A
593.3Khrs min. MIL-HDBK-217F (25℃)
PCB mounting style : 69.5*39*24mm (L*W*H)
Screw terminal style : 91*39.5*28.5mm (L*W*H)
PCB mounting style : 0.109Kg;144pcs/16.7Kg/0.97CUFT
Screw terminal style :0.12Kg;120pcs/15.4Kg/0.74CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:IRM-30-SPEC 2015-12-07
IRM-30
30W Single Output Encapsulated Type
Block Diagram
series
fosc : 65KHz
RECTIFIERS
&
FILTER
EMI
FILTER
I/P
RECTIFIERS
&
FILTER
POWER
SWITCHING
PWM
CONTROL
Derating Curve
+V
-V
DETECTION
CIRCUIT
Output Derating VS Input Voltage
100VAC & 230VAC
for others
100
100
90
80
80
230VAC for 5V
70
100VAC for 5V
LOAD (%)
LOAD (%)
60
40
20
-30
0
10
20
30
40 45 50
AMBIENT TEMPERATURE (℃)
60
70
(HORIZONTAL)
60
50
40
85
95
100
115
120
140
160
180
200
220
240
264
INPUT VOLTAGE (VAC) 60Hz
File Name:IRM-30-SPEC 2015-12-07
IRM-30
30W Single Output Encapsulated Type
Mechanical Specification
Case No.
series
Unit:mm
PCB mounting style
69.5
61.5
AC/L
9
-V
5.5 4.5
24
4.5
4
3.5±1mm
AC/N
1.04
39
+V
BOTTOM
VIEW
P/N diameter:1.04
Screw terminal style
39.5
28.5
23
91
AC/L AC/N
80
4-ψ3.4
6.4
+V -V
5
Installation Manual
Please refer to : http://www.meanwell.com/webnet/search/InstallationSearch.html
File Name:IRM-30-SPEC 2015-12-07