The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors (IDC) QR/P18 Series ■Overview The QR/P18 Series of miniature rack/panel connectors is designed for the complete segmentation of the structure of the external holder/terminal units of the well-received QR/P Series of plug-in rectangular rack/panel connectors; furthermore, the subsequent insertion of the harnessed terminal unit affords a more efficient harness mounting task. These connectors are configured with 12, 18, or 24 (insulation displacement connection) positions in the signal portion, and 4 (crimp) positions in the power supply portion. Power supply contact male unit External holder Power supply contact female unit Power supply male contacts Signal contact female unit ■Features 1. Completely segmented structure of the external holder/terminal unit In order to improve the harness mounting task, the connectors are designed for the complete segmentation of the external holder and the signal/power supply unit, and the method of subsequently inserting harnessed products aims to improve the workability of the power supply/signal section harness as well as the mounting of the set. Panel Power supply female contacts Signal contact male unit 2.5 Gbps Eye Pattern Waveform 2. Signal unit The signal unit uses the highly reliable insulation displacement connection method. (The wire is AWG #26 and the insulation outside diameter is 0.88 mm.) The insulation displacement task can now be used by fitting a special applicator to a commercially available automatic insulation displacement machine, or a manual press can also be selected. 3. Power supply portion The power supply terminals permit the use of a crimp harness using wire of AWG #16 to 18 (and insulation outside diameter of 2.1 to 2.2 mm), and can accommodate a maximum of 12 A. 4. Sequenced structure Connectors possess two sequenced contacts in the signal male unit and one sequenced contact in the power supply female unit making them perfect in terms of safety too. 5. Panel installation Installation to a panel uses a single-action method on the anchored side and a floating screw structure on the floating side which permits smooth insertion and disconnection without forcing. 6. RoHS compliant All components and materials comply with the requirements of the EU Directive 2002/95/EC. *A portion of this series is suitably constructed for high-speed differential transfer, and using a suitable cable, transfer of 2.5Gbps per pair is possible. 2.5Gbps Scale AWG28 2m X : 100psec/div Y : 100V/div ■Applications PPC, transmitting and receiving devices, data communications equipment, vending machines, measuring instruments, factory automation equipment, and other highspeed transfer applications, etc. 2007.4 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■Product Specifications 125 V AC (Signal contacts) -40ç to +105ç 300V AC (Power contacts) Operating temperature range 1A (Signal contacts) (Note 1) 12A (Power contacts) Voltage rating Ratings Current rating Item 1. Contact resistance 2. Insulation resistance 3. Withstanding Voltage 4. Durability (mating / un-mating) Specification 50mø max. (Signal contacts) (Note 2) 10mø max. (Power contacts) (Note 2) 1000Mø min. (Signal contacts) 5000Mø min. (Power contacts) No flashover or insulation breakdown. Contact resistance: 70mø max. (Signal contacts) 20mø max. (Power contacts) Conditions 100 mA 500 V DC 500 V AC / one minute 3000 cycles Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 490 m/s2, 11 ms duration, sine half-wave 6. Shock waveform, 3 cycles in each of the 3 axis Contact resistance: 70mø max. (Signal contacts) Temperature: -55ç→+5ç to +35ç→+105ç→+5ç to +35ç 20mø max. (Power contacts) Time: 30→5→30→5 (Minutes) 7. Temperature cycle 5 cycles No damage, cracks, or parts dislocation. Insulation resistance: 100Mø min. (Signal contacts, state) 8. Humidity 3000Mø min. (Power contacts, state) 96 hours at 40ç and RH 90% to 95% (Steady state) No damage, cracks, or parts dislocation. No corrosions. 9. Salt mist 5% salt water solution for 48 hours 5. Vibration No electrical discontinuity of 10µs or more. No damage, cracks, or parts dislocation. Note1: Includes temperature rise caused by current flow. Note2: Excludes wire conductor resistance. ■Materials Components Insulator Insulator Female contacts Male contacts Insulator Female contacts Male contacts Female contacts Male contacts Products External holder Signal contact unit Power contact unit Power supply contacts Material PBT PA Phosphor bronze Phosphor bronze PBT Phosphor bronze Phosphor bronze Copper alloy Copper alloy Finish ----------------------------Gold plated Gold plated --------------Gold plated Gold plated Gold plated + Tin copper plated Gold plated + Tin copper plated ■Function Diagram ●Power supply/signal combination type QR/P18-Pπ4S QR/P18-Sπ4S-π QR/P17-PCA-π11(50) QR/P18-4P-C QR/P18-4S-C QR/P18-πSπ QR/P18-πPπ ●Signal type QR/P18-Sπ QR/P18-πSπ 2 QR/P18-Pπ QR/P18-πPπ QR/P17-SCA-π11(50) Remarks UL94V-0 UL94V-0 ---------------------------UL94V-0 ----------------------------------------------------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■Ordering information ●External holder. QR / P18 - S A 4 P - A 1 2 3 1 Series name 2 Signal contact type 3 Number of signal contact of external holder S: Female contact 4 5 6 4 Number of power contact 5 Power contact type 6 Applicable panel thickness P: Male contact S: Female contact P: Male contact A: 12 pos. (Contact pitch 1.5mm) A: 2mm B: 18 pos. (Contact pitch 1.5mm) B: 1.5mm C: 24 pos. (Contact pitch 1.5mm) ●Signal contact termination block QR / P18 - 12 S A 1 1 Series name 2 Number of signal contact 3 Signal contact type 2 3 4 4 Number of signal contact of signal contact termination block S: Female contact A: 12 pos. (Contact pitch 1.5mm) P: Male contact B: 18 pos. (Contact pitch 1.5mm) C: 24 pos. (Contact pitch 1.5mm) ●Power contact insert QR / P18 - 4 P - C 1 1 Series name 2 Number of power contact 3 Power contact type 2 3 4 4 Connector type C: Crimp housing S: Female contact P: Male contact ●Power contact QR / P17 - PC A - 1 1 1 1 1 Series name 2 Power contact type 3 Applicable wire style A: UL1015 2 3 4 5 6 4 Packaging 5 Applicable wire 1: AWG#16 to 18 6 Contact plating 1: Gold plated PC: Male crimp contact SC: Female crimp contact 1: Pack packaging 2: Reel packaging 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■External holder Mated condition (Shown for reference) Panel Panel QR/P18-Sπ4P-A QR/P18-Pπ4S QR/P15-SCREW 2 6.15 23 26.5 2 2.5 5.1 7.4 29 Note: Establish panel mounting so that the mating gap dimensions of the power supply side and the signal side are 1.5 mm or less. ●Female power contact, male signal contact type A B Panel cutout Applicable panel thickness: 2.0mm 0 .2 5 -0 20.7 +0.1 0 (2) 0. C±0.1 19.8 +0.1 0 14.75±0.05 10.5 3 23 32.65 R0 D+0.1 0 18.8 2- 26.5 R 6- .2 +0 0 .3 2-M3∞0.5 10.5±0.1 13.9 +0.1 Die roll side should be 0 connector mating side. Number of contacts Signal Power QR/P18-PA4S CL221-0293-8 12 4 QR/P18-PB4S CL221-0313-3 18 4 QR/P18-PC4S CL221-0297-9 24 4 Panel attachment screw (QR/P15-SCREW CL221-0251-8) is optional. Part number 4 CL No. A B C D RoHS 54.65 58.65 63.15 46.25 50.25 54.75 46.25 50.25 54.75 27.2 31.2 35.7 YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ●Male power contact, female signal contact type A B Panel cutout Applicable panel thickness: 2.0mm 0 .2 5 -0 20.7 +0.1 0 (2) 0. C±0.1 19.8 +0.1 0 14.75±0.05 10.5 3 23 32.65 R0 D+0.1 0 18.8 2- 26.5 R 6- .2 +0 0 .3 2-M3∞0.5 10.5±0.1 13.9 +0.1 Die roll side should be 0 connector mating side. Part number CL No. QR/P18-SA4P-A QR/P18-SB4P-A QR/P18-SC4P-A CL221-0294-0 CL221-0315-9 CL221-0298-1 Number of contacts Signal Power 12 4 18 4 24 4 A B C D RoHS 43.85 47.85 52.35 37.9 41.9 46.4 27.25 31.25 35.75 17.3 21.3 25.8 YES 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■External holder (Signal type) Mated condition (Shown for reference) QR/P18-Sπ-B QR/P18-Pπ QR/P15-SCREW Panel 1.5 1.5 15 3 2.5 17.5 5.1 7.4 Note: Establish panel mounting so that the mating gap dimensions of the power supply side and the signal side are 1.5 mm or less. ●Male signal contact type Panel cutout R0 .3m in. R 5ax 5m 0. 3 15 18 Applicable panel thickness: 1.5mm C (15) +0.2 0 t=1.5 13 4.7 D+0.2 0 E±0.1 Die roll side should be connector mating side. B A Number of contacts A Signal QR/P18-PB CL221-0309-6 18 37.7 QR/P18-PC CL221-0311-8 24 42.2 Panel attachment screw (QR/P15-SCREW CL221-0251-8) is optional. Part number 6 4.7±0.1 14.8 +0.2 0 0 2.2 -0.2 . 2-M3∞0.5 CL No. B C D E RoHS 29.5 34.0 27.0 31.5 23.5 28.0 29.5 34.0 YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ●Female signal contact type Panel cutout R0 .3m in. ax 5m 0. R 5- 3 15 18 Applicable panel thickness: 1.5mm C (15) +0.2 0 t=1.5 13 4.7 4.7±0.1 14.8 +0.2 0 0 2.2 -0.2 . 2-M3∞0.5 D+0.2 0 E±0.1 Die roll side should be connector mating side. B A Part number CL No. QR/P18-SB-B QR/P18-SC-B CL221-0310-5 CL221-0312-0 Number of contacts Signal 18 24 A B C D RoHS 28.05 32.55 25.1 29.6 13.00 15.25 07.3 11.8 YES 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■Signal contact termination block ●Male, contact pitch 1.5mm 15 A B Sequence contact Sequence contact Number of contacts QR/P18-12PA CL221-0291-2 12 QR/P18-18PB CL221-0285-0 18 QR/P18-24PC CL221-0295-3 24 Adscable cable: AWG#26, insulator diameter 0.88mm Part number CL No. A B RoHS 13.5 17.5 22.0 14.0 18.0 22.5 YES B A ●Female, contact pitch 1.5mm 15 Number of contacts QR/P18-12SA 12 CL221-0292-5 18 QR/P18-18SB CL221-0286-2 QR/P18-24SC CL221-0296-6 24 Applicable cable: AWG#26, insulator diameter 0.88mm Part number 8 CL No. A B RoHS 13.5 17.5 22.0 14.0 18.0 22.5 YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■Power contact insert ●Male 15.9 31.1 17.9 Part number CL No. RoHS QR/P18-4P-C CL221-0316-1 YES ●Female Sequence contact(No.4) 13.5 27.7 16.2 Part number CL No. RoHS QR/P18-4S-C CL221-0314-6 YES 9 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■Power contact ●Male contact 28.5 3 Applicable wire size 16-18 Part number CL No. Applicable cable QR/P17-PCA-111(50) CL221-0265-2-50 AWG16~18 UL1015 QR/P17-PCA-211(50) CL221-0263-7-50 AWG16~18 UL1015 Applicable cable: AWG#16 to 18, insulator diameter 2.1mm to 3.2mm Packaging Q'ty RoHS Bag Reel 100 3000 YES ●Female contact 4 Part number CL No. Applicable cable CL221-0264-0-50 AWG16~18 UL1015 QR/P17-SCA-111(50) CL221-0262-4-50 AWG16~18 UL1015 QR/P17-SCA-211(50) Applicable cable: AWG#16 to 18, insulator diameter 2.1mm to 3.2mm 10 16-18 18.3 Applicable wire size Packaging Q'ty RoHS Bag Reel 100 3000 YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BTools ●Signal contact termination block IDC tool Type Part number Hand press for 12 pos. QR/P18-12/IDCR-MP Hand press for 18 pos. QR/P18-18/IDCR-MP Hand press for 24 pos. QR/P18-24/IDCR-MP Automatic IDC applicator for male signal contact Automatic IDC applicator for female signal contact Applicable connector QR/P18-12PA QR/P18-12SA QR/P18-18PB QR/P18-18SB QR/P18-24PC QR/P18-24SC QR/P18-12PA 2957-1000 QR/P18-18PB QR/P18-24PC QR/P18-12SA 2957-1500 QR/P18-18SB QR/P18-24SC Automatic IDC machine (Murata kogyo co., Ltd., P/N MS-01) is available. ●Power contact crimp tool Applicable contact Type Part number Hand tool HT104/QR/P17-1 Applicable for automatic crimp AP105-QR/P17-1 QR/P17-PCA-211(50) machine AP105-QR/P17-1 QR/P17-SCA-211(50) Automatic crimp machine CM-105 QR/P17-PCA-111(50) QR/P17-SCA-111(50) QR/P17-PCA-211(50) QR/P17-SCA-211(50) QR/P17-PCA-111(50) Extraction tool QR/P17-TC QR/P17-SCA-111(50) QR/P17-PCA-211(50) QR/P17-SCA-211(50) 11 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. ■Inspection After Cable Wiring ●Signal contact unit Signal contact unit (male) Signal contact unit (female) Cable Cable A A B B 0~0.5 Cable end position A-A B-B 2.55±0.1 2.55±0.1 2.08±0.1 2.08±0.1 0~0.5 Cable end position Insulation displacement height Insulation height Insulation displacement height Insulation height (1) After wiring the cable, examine the cable end position, the insulation displacement height, and the insulation height. (2) In examining the insulation displacement height and the insulation height, use a measurement pin having a tip of 0.5 mm diameter. (3) For information about the detailed inspection method, please request the "Inspection Standards Manual" from Hirose Electric. (4) The inspection method of the diagrams is for cable with AWG #26 wire and an insulation outside diameter of 0.88 mm. ●Power supply contacts Male contact Cable Female contact Cable Spring 3.6 mm or greater 1.6 mm or greater Spring Before inserting the power supply contacts into the power supply terminal unit, check that the spring portion illustrated in the diagram is not misshapen. When the spring portion is less than the dimensions indicated in the diagram, the spring could pull out from the power supply terminal unit; therefore, the specified dimensions should be maintained. ® 12 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.