2016-V1.0-0831 Specifications AC-DC Din Rail Mounted Power Supply IS-180 Series, 180W PAIRUI ELECTRONICS No. 545 Museum Road Yangzhou, Jiangsu China 225009 Tel: 86 (514) 8279 1592 Fax: 86 (514) 8769 3159 2016 din rail power supply PRODUCT SPECIFICATION AC-DC Din Rail Mountable Power Supply IS-180 SERIES, SINGLE PHASE INPUT Features 3 Year Warranty Universal Input 90~264Vac 100% Full Load Burn-in Test Cooling by Free Air Convection All Round Protections: Short Circuit, Over Voltage, Over Current, Over Temperature LED Indicator for DC Power On LED Indicator for DC Low Applications Electrical IS 180 - 24 Output Voltage(VDC) Output Power(W) Series Name PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:1/17 din rail power supply PRODUCT SPECIFICATION Electrical Part Number Nominal Input Voltage Output Voltage Output Current Ripple (Max.) Efficiency (Typ.) Certificate IS180-24 100 - 240VAC 24V 7.5A 1%Vo mVp-p 90% CE, FCC, CB, UL, CUL IS180-48 100-240VAC 48V 3.8A 1%Vo mVp-p 91% CE, FCC, CB, UL, CUL NOTE: 1. The ripple values are measured at 20MHz of bandwidth by using a 12'' twisted pair-wire terminated with 0.1uF & 47uF parallel capacitor under ambient temperature 25℃ at rated input voltage and rated load; 2. The efficiency values are measured under ambient temperature 25℃ at rated input voltage and rated load. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:2/17 din rail power supply PRODUCT SPECIFICATION INPUT PARAMETER CONDITIONS MIN TYP MAX UNITS Input voltage 90 264 Vac Input frequency 47 63 Hz Input current Full load, Vin=115Vac Full load, Vin=230Vac 35 65 Cold start, Vin=115Vac Cold start, Vin=230Vac Inrush current A A 1.8 0.9 A A 1. This product is built in inrush limiting circuit to protect the circuit from surge current damages when the power is turned on. Malfunction can occur by repeating the input voltage on and off rapidly. Therefore, sufficient interval should be given between turning on and off the power; 2. To avoid connecting the switch or fuse to input terminal(outside of the power supply), more consideration should be given when selecting the parts that can endure the inrush current Power factor(PF) Full load, Vin=115Vac Full load, Vin=230Vac Stand-by power consumption Vin=230Vac Surge voltage L-N 0.98 0.96 7 2 W KV PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:3/17 din rail power supply PRODUCT SPECIFICATION OUTPUT PARAMETER CONDITIONS MIN Output voltage accuracy IS180-24 IS180-48 Output voltage adjustment range TYP MAX UNITS ±2 % 21-28 44-54 V V Output voltage can be adjusted within above range by V-ADJ. variable resistance inside of the power supply. When output voltage exceeds the range, the power supply will be in failure or get into over voltage protection mode. To avoid the case that the output voltage is higher than rated voltage, output current should be used under rated current Minimum load % 0 Line regulation Vin from 100Vac to 240Vac 1 % Load regulation Vout from min. to max. 1 % Turn-on delay time Full load, Vin=115Vac 3600 ms Hold up time Full load, Vin=115Vac 20 ms PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:4/17 PRODUCT SPECIFICATION din rail power supply Protection Short circuit Hiccuo mode, it will recover automatically after fault condition is removed IS180-24: over voltage protection value 33V IS180-48: over voltage protection value 66V Over voltage (1) When output voltage exceeds above over voltage protection value or reversal voltage occurs, the protection will be started and the output voltage will be cut off in order to protect the power supply; (2) The power supply will recover after the power is turned on again IS180-24: over current protection value 8.3A IS180-48: over current protection value 4.2A Over current (1) When output voltage exceeds above over current protection value, the protection will be started and go into hiccup mode; (2) The power supply will recover automatically after the fault condition is removed Over temperature protection value: 110±10℃ Over temperature (1) When the ambient temperature exceeds above over temperature protection value, the protection will be started and go into hiccup mode; (2) The power supply will recover automatically after the fault condition is removed PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:5/17 din rail power supply PRODUCT SPECIFICATION Environment PARAMETER CONDITIONS MIN Ambient operating temperature Startup at rated voltage Operating relative humidity TYP MAX UNITS -25 +70 ℃ Non condensing 20 95 % Storagetemperature Humidity 5 ~ 95% RH - 40 + 85 ℃ MTBF Fullload, 220Vac input, 25℃ambient temperature 230 DC-OK led LED(Green) DC OK LED light will be ON when properly operated DC-Low led LED(Red) DC Low LED light will be ON: (1) when output voltage is below 85%(±2.5%) from the rated output voltage; (2) when get over voltage, over current, over temperature and short circuit fault Colling Free air convection Mounting method Vertical Dimension(W x H x D) 50.0 x 130.0 x 125.0mm (1.97 x 5.12 x 4.92inch) Weight 950g Packing 13pcs/13.5kg/0.7cuft/carton Carton size 620 x 260 x 175mm(LxWxH) Khrs PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:6/17 PRODUCT SPECIFICATION din rail power supply Safety/EMC Isolation voltage I/P-O/P:3KVac, I/P-FG: 1.5KVac, O/P-FG: 0.5KVac Insulation resistance 100mΩ Max./500VDC Safety Design refer to UL60950-1, EN60950-1 EMC EN 55022:2010+AC:2011 (CISPR 22:2008) ClassB EN 61000-3-2:2014 (IEC 61000-3-2:2014) EN 61000-3-3:2013 (IEC 61000-3-3:2013) EN 55024:2010 (CISPR 24:2010) NOTE: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25℃andVin=100Vac to 240Vac. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:7/17 din rail power supply PRODUCT SPECIFICATION Mechanical 125±1.0 1 7.5 47.5 Output Voltage Adjustment 130±1.0 115±0.5 7 8 LED (DC OK) 12.3 NAME PLATE SN code 6 47.5 LABEL PRINTING LED (DC LOW) 79 35 DIN Rail (Width: 35mm) 50±1.0 7.5 7.5 7.5 8 Max. 110.4 7.5 14.7 Unit: mm Tolerance: ±1.0 PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:8/17 din rail power supply PRODUCT SPECIFICATION Mechanical 1 3 2 4 Marking No. Assignment 1 DC(+) Output Terminal 2 V-ADJ. 3 DC OK DC(-) Output Terminal DC LOW LN 5 6 7 4 L 5 AC(L) Input Terminal N 6 AC(N) Input Terminal 7 AC Grounding Terminal V-ADJ. / DC Output voltage adjustment trimmer DC OK / DC Output OK indication LED(Green) DC LOW / DC Output Low indication LED(Red) PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:9/17 din rail power supply PRODUCT SPECIFICATION 100 100 90 90 80 80 Load(%) Load(%) Electrical Curve 70 60 50 60 50 40 40 230Vac Input 110Vac Input 30 -10 70 0 10 20 30 40 50 60 70 30 90 110 130 150 170 190 210 230 264 Input voltage(Vac) Temperature(℃) Block Diagram +V L Line Filter N Rectifier Circuit Inrush Current Limit +V PFC Circuit Switching Device Rectifier Circuit Current Detect -V -V FG PWM Control Circuit Error AMP OVP Detect Output Detect DC OK(Green) DC Low(Red) PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:10/17 din rail power supply PRODUCT SPECIFICATION Package Inner Box L 178 x W 164 x H 57mm Outer Carton L 620 x W 260 x H 185mm SERIES QTY/BOX QTY/CARTON NET WEIGHT GROSS WEIGHT VOLUME IS-180 1 piece 13 boxes 12.4kg/carton 13.5kg/carton 0.7cuft/carton PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:11/17 din rail power supply PRODUCT SPECIFICATION Application Note 1. Series Operation LOAD LN LN Series Operation A LOAD LN LOAD LN Series Operation B Note: 1. Series operation can be connected as shown in above; 2. Load current should be less than the current value of the product with the lowest output current specified at the product specification with the power supply at series connection. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:12/17 din rail power supply PRODUCT SPECIFICATION Application Note 2. Parallel Operation LOAD LOAD LN LN LN Parallel Operation A (Unable to use) LN Parallel Operation B (Unable to use) LOAD LN LN Parallel Operation C (Backup) Note: 1. Parallel operation should be composed with the same products, while the connection should be as shown as “Parallel operation C”; 2. In parallel operation C, current capacity cannot be increased, while it should be used for backup only. Moreover, diode that is to be added during parallel operation should be selected after considering it’s voltage drop, output voltage and current capacity. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:13/17 PRODUCT SPECIFICATION din rail power supply Application Note 3. Mounting Method (1) How to fix Firstly hang A part on the top of Rail as shown in below, then push the power supply into B direction to fix it. (2) How to remove Remove the power supply to D direction, pulling C part by using tools, such as a screwdriver, to downward direction. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:14/17 din rail power supply PRODUCT SPECIFICATION Application Note 3. Mounting Method (3) Mounting Spacing Mounting method should be considered with airflow. Leave enough space between the units when several units are mounted together. Forced air cooling makes protection against heat better. LN LN 25mm AIR 25mm 25mm or more AIR PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:15/17 PRODUCT SPECIFICATION din rail power supply Application Note 4. Cautions (1) Please confirm if the capacity of the product is suitable for your intended application before putting it in use; (2) Only the rated input voltage specified on the product should be used; (3) Only the wires with rated capacity should be connected to this product, as allowable voltage and current is varied according to each type of wire; (4) Ground terminal of the power supply must be grounded before use to prevent electric shock or electromaganetic interference; (5) Be cautions to keep the product clean as foreign matter near the input & output terminal or inside if the product could cause series damages; (6) If a fuse installed in the product blows off, the product should experience damages not only to the fuse but also to other parts as well. Therefore, the product is to be required for maintenance work from customer service department as well as replacement of the fuse; (7) Due to constant leakage current flows within the product, extra caution should be made if multiple number of products are used connecting to each other as total leakage current could be amounted beyond the capacity; (8) Be sure to avoid any physical contact with the product since some of the parts inside of the product are being functioned at high voltage, which could cause serious electric shock; (9) For the purpose of safety as well as reliability of the product, please avoid using the product at the following sites: - A place near water or fire - A place with high room temperature and poor ventilation - A place with a presence of foreign subject or dust - A place near volatile or flammable compounds - A place with high humidity - A place vulnerable for vibration or shock (10) Do not inspect or repair the product while the power is applied; (11) Unauthorized modification should be avoided in order to prevent series injury or physical loss due to any malfunction; (12) In case of power outage while in operation, be sure to turn off the power supply. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:16/17 PRODUCT SPECIFICATION din rail power supply Application Note 5. Warranty (1) Repair service will be provided for free upon any mechanical, technical or functional defects during the guaranteed warranty, however, any defects or malfunction due to international infliction or negligence by customers will be repaired at the customer’s expense; (2) Guaranteed warranty of the product runs for 3 years, while appearance and specification of the product is subject for change without any prior notification for the purpose of quality improvement of the product. PAIRUI ELECTRONICS www.pairuigroup.com Updated 2016-V1.0-0830 Page:17/17 din rail power supply PRODUCT SPECIFICATION Update Record Date Version Updated Content 2016/08/30 2016-V1.0-0830 File created Updated By Approved By