PD-90712C POWER MOSFET THRU-HOLE (TO-254AA) IRFM360 400V, N-CHANNEL ® HEXFET MOSFET TECHNOLOGY Product Summary Part Number RDS(on) ID IRFM360 0.20 Ω 23A HEXFET® MOSFET technology is the key to International Rectifier’s advanced line of power MOSFET transistors. The efficient geometry design achieves very low on-state resistance combined with high transconductance. HEXFET transistors also feature all of the well-established advantages of MOSFETs, such as voltage control, very fast switching, ease of paralleling and electrical parameter temperature stability. They are well-suited for applications such as switching power supplies, motor controls, inverters, choppers, audio amplifiers, high energy pulse circuits, and virtually any application where high reliability is required. The HEXFET transistor’s totally isolated package eliminates the need for additional isolating material between the device and the heatsink. This improves thermal efficiency and reduces drain capacitance. TO-254AA Features: n n n n n n Simple Drive Requirements Ease of Paralleling Hermetically Sealed Electrically Isolated Dynamic dv/dt Rating Light-weight Absolute Maximum Ratings Parameter ID @ VGS = 10V, TC = 25°C ID @ VGS = 10V, TC = 100°C IDM PD @ TC = 25°C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current À Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy Á Avalanche Current À Repetitive Avalanche Energy À Peak Diode Recovery dv/dt  Operating Junction Storage Temperature Range Lead Temperature Weight Units 23 14 92 250 2.0 ±20 980 23 25 4.0 -55 to 150 A W W/°C V mJ A mJ V/ns °C 300 ( 0.063 in.(1.6mm) from case for 10s) 9.3 (Typical) g For footnotes refer to the last page www.irf.com 1 05/12/15 IRFM360 Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified) Parameter Min BVDSS Drain-to-Source Breakdown Voltage ∆BV DSS /∆T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage gfs Forward Transconductance IDSS Zero Gate Voltage Drain Current Typ Max Units Test Conditions 400 — — V VGS = 0V, ID = 1.0mA — 0.46 — V/°C Reference to 25°C, ID = 1.0mA — — 2.0 1.4 — — — — — — — — 0.20 0.23 4.0 — 25 250 IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (‘Miller’) Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance — — — — — — — — — — — — — — — — — — — 6.8 100 -100 210 28 120 33 140 120 99 — Ciss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance — — — 4200 900 400 — — — Ω V µA nA nC ns nH pF VGS = 10V, ID = 14A à VGS = 10V, ID = 23A VDS = VGS, ID = 250µA VDS = 15V, IDS = 14A à VDS = 320V ,VGS=0V VDS = 320V, VGS = 0V, TJ = 125°C VGS = 20V VGS = -20V VGS =10V, ID = 23A VDS = 200V VDD = 200V, ID = 23A, VGS =10V, RG = 2.35Ω Measured from drain lead (6mm/ 0.25in. from package) to source lead (6mm/0.25in. from package) VGS = 0V, VDS = 25V f = 1.0MHz Source-Drain Diode Ratings and Characteristics Parameter Min Typ Max Units IS ISM VSD t rr Q RR Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) À Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge ton Forward Turn-On Time — — — — — — — — — — 23 92 1.8 1000 16 Test Conditions A V nS µC Tj = 25°C, IS = 23A, VGS = 0V à Tj = 25°C, IF = 23A, di/dt ≤ 100A/µs VDD ≤ 50V à Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter Min Typ Max Units RthJC RthCS Junction-to-Case Csae-to-sink — — — 0.21 0.5 — RthJA Junction-to-Ambient — — 48 Test Conditions °C/W Typical socket mount Note: Corresponding Spice and Saber models are available on International Rectifier Website. For footnotes refer to the last page 2 www.irf.com IRFM360 Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRFM360 13a & b Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage 1000 ID, Drain-to-Source Current (A) OPERATION IN THIS AREA LIMITED BY RDS(on) 100 100µs 10 1ms 1 0.1 10ms Tc = 25°C Tj = 150°C Single Pulse 1 DC 10 100 1000 VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage 4 Fig 8. Maximum Safe Operating Area www.irf.com IRFM360 VDS VGS RG RD D.U.T. + -V DD 10V Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 % Fig 10a. Switching Time Test Circuit VDS 90% Fig 9. Maximum Drain Current Vs. Case Temperature 10% VGS td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case www.irf.com 5 IRFM360 15V L VDS D.U.T. RG 20V 10 IAS DRIVER + - VDD A 0.01Ω tp Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS tp Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Current Regulator Same Type as D.U.T. Fig 12b. Unclamped Inductive Waveforms 50KΩ QG 10 12V .2µF .3µF 10 V QGS QGD + V - DS VGS VG 3mA Charge Fig 13a. Basic Gate Charge Waveform 6 D.U.T. IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit www.irf.com IRFM360 Footnotes:  ISD ≤ 23A, di/dt ≤ 170A/µs, À Repetitive Rating; Pulse width limited by VDD ≤ 400V, TJ ≤ 150°C maximum junction temperature. Á VDD = 50V, starting TJ = 25°C, L= 3.7mH Peak IL = 23A, VGS = 10V à Pulse width ≤ 300 µs; Duty Cycle ≤ 2% Case Outline and Dimensions — TO-254AA 0.12 [.005] 13.84 [.545] 13.59 [.535] 3.78 [.149] 3.53 [.139] 6.60 [.260] 6.32 [.249] A 20.32 [.800] 20.07 [.790] 17.40 [.685] 16.89 [.665] 1 C 2 2X B 3 14.48 [.570] 12.95 [.510] 3X 3.81 [.150] 13.84 [.545] 13.59 [.535] 1.27 [.050] 1.02 [.040] 0.84 [.033] MAX. 1.14 [.045] 0.89 [.035] 0.36 [.014] 3.81 [.150] B A NOT ES : 1. 2. 3. 4. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. CONTROLLING DIMENSION: INCH. CONFORMS TO JEDEC OUTLINE TO-254AA. PIN ASSIGNMENTS 1 = DRAIN 2 = SOURCE 3 = GATE CAUTION BERYLLIA WARNING PER MIL-PRF-19500 Package containing beryllia shall not be ground, sandblasted, machined, or have other operations performed on them which will produce beryllia or beryllium dust. Furthermore, beryllium oxide packages shall not be placed in acids that will produce fumes containing beryllium. IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd. El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 05/2015 www.irf.com 7