RoHS Multilayer Power Chip Inductor MLPC15N6 Dimensions: Inches (mm) FERRITE TERMINAL ELECTRODE 0.024±0.008 (0.6±0.2) 0.0394 MAX (1.0 MAX) 0.099±0.008 (2.5±0.2) Allied Part Number MLPC15N6-R47M-RC MLPC15N6-1R0M-RC MLPC15N6-2R2M-RC MLPC15N6-3R3M-RC MLPC15N6-4R7M-RC 0.079±0.008 (2.0±0.20) Inductance Tolerance (µH) (%) 0.47 1.0 2.2 3.3 4.7 Test Freq. MHz, 200mV 20 20 20 20 20 3 3 3 3 3 DCR (Ω ±25%) 0.04 0.055 0.08 0.10 0.11 Isat (mA) Max Irms (mA) Max 1500 900 500 400 300 1800 1600 1300 1200 1100 All specifications subject to change without notice. Features • • • • • 1008 EIA Size High Current Capacity Low DCR Multilayer Ferrite Construction Excellent Solderability Characteristics Electrical Inductance Range: 0.47µH ~ 4.7µH Tolerance: 20% across entire range Also available in 30% Test Frequency: 3MHZ, 200mV Operating Temp: -55ºC to +125ºC Isat Current: Based on a 30% Inductance drop from its original value without current. Recommended Pad Layout Irms Current: Based on a 40ºC temperature rise from 25ºC ambient without current. 0.122±0.016 (2.7~3.5) Resistance to Soldering Heat 0.063±0.012 (1.3~1.9) 0.09±0.012 (2.0~2.6) 0.049±0.008 (1.25±0.20) 0.049±0.008 (1.25±0.20) Pre-heating: 150ºC, 1min Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temperature: 260 ± 5ºC Immersion Time: 10 ± 1sec No Damage with more than 75% coverage Inductance within 20 of initial value. Test Equipment (L): Agilent HP4287A + 16197A, 3MHz, 200mV DCR: HP 4338B, or equivalent Physical Packaging: 3000 pieces per 7 inch reel. Marking: None 949-356-1780 ALLIED COMPONENTS INTERNATIONAL 06/07/2016 15 www.alliedcomponents.com