HGN-368 IEC 60320 INLET SOCKET WITH SWITCH, FLANGE MOUNT MECHANICAL DIMENSIONS (Unit: mm) 46.0 36.0+- 0.2 35.0 2x 3.3x90 CSK 0.8 TYP. 32.5 FEATURES The HGN-368 series power entry module features an IEC Connector with an integral switch. The filter is designed to for applications where Common Mode and Differential Mode noise must be controlled. Fully enclosed metal housing prevents input of high frequency noise and protects ultra-sensitive equipment. 28.0 6.3 TYP. These filters are also available for Medical equipment with low leakage current to comply with UL544 & 2601. APPLICATIONS Computer & networking equipment, Measuring & control equipment, Data processing equipment, laboratory instruments, Switching power supplies, other electronic equipment. 58.5 TECHNICAL DATA • Rated Voltage: 115/250VAC • Rated Current: 1A, 2A, 4A, 6A, • Power Line Frequency: 50/60Hz • Max. Leakage Current each Line to Ground: @ 250VAC 50Hz: 0.5mA, max @ 250VAC 50Hz: 2µA*, max • Hipot Rating (one minute) Line to Ground: 2250VDC Line to Line: 1450VDC • Temperature Range: -25C to +85C * Medical application 6.0 36.0+- 0.2 29.0 +- 0.3 33.0+- 0.3 2x M3 4x R1.5 Specifications subject to change without notice. Dimensions (mm). See Appendix A for recommended power cord. See PDI full line catalog for detailed specifications on power cords. 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com 75 HGN-368 Series Example & Ordering Code HGN-368 - 1 CURRENT RATING (A): = = = = SCHEMATIC: M - F1 1 2 4 6 STANDARD TYPE = WITHOUT C(Y); C(X) ONLY =M TERMINAL: BLANK QUICK CONNECT (6.3 x 0.8) = F1 = F2 SOLDER Attenuation Tables & Schematics Non-Medical Applications Insertion loss in dB (50 Ohm circuit) Current L Comm. Mode(L-G) MHz Diff. mode(L-L) MHz Rating Value .01 .05 .1 .15 .5 1 5 10 30 .01 .05 .1 .15 .5 1 5 10 30 29 30 19 18 32 35 21 20 49 50 32 30 60 58 58 58 40 60 35 49 70 70 50 60 30 2 40 3 38 2 33 10 5 8 5 12 6 10 9 15 5 10 11 13 43 35 9 9 67 60 40 40 82 83 81 75 70 78 73 75 39 38 39 60 E P 2200pF N' E' 2200pF LOAD 21 24 10 10 0.068 F 11 12 3 4 1M 10.3mA 4.6mA 1.2mA 0.8mA LINE 1A 2A 4A 6A L(mH) N P' L(mH) Medical Applications Insertion loss in dB (50 Ohm circuit) 76 23 18 10 8 32 30 17 13 38 35 20 17 41 36 22 19 51 41 30 26 47 36 42 37 33 33 28 29 31 30 30 29 22 21 22 24 3 5 2 5 5 8 8 13 5 5 8 11 4 50 69 81 74 8 48 69 82 73 7 9 48 82 78 8 9 41 83 80 34 35 45 62 E P N' E' LOAD 10.3mA 4.6mA 1.2mA 0.8mA L(mH) N 0.068 F 1A 2A 4A 6A Comm. Mode(L-G) MHz Diff. mode(L-L) MHz .01 .05 .1 .15 .5 1 5 10 30 .01 .05 .1 .15 .5 1 5 10 30 1M L Value LINE Current Rating P' L(mH) 145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076 e-mail: [email protected] • www.powerdynamics.com