Cree LED Module LMR4 with EasyWhite™ Technology A fast, proven way to realize the promise of LED Lighting Data Sheet Cree LED Modules provide a simple solution for lighting designers and manufacturers to adopt best-in-class LED lighting from Cree. The LMR series continues Cree’s history of innovation in LEDs for lighting applications and provides a comprehensive solution for LED light sources. This versatile LED lighting module allows design flexibility with a fully integrated, small form factor design that is also drop-in compatible with the LMR4 Cree TrueWhite® Technology version that provides higher color quality. The Cree LED Module LMR4 EasyWhite is the ideal choice for general indoor and outdoor lighting applications that require an LED solution with excellent color consistency. The compact module form factor is a benefit to lighting manufacturers seeking a simple solution to adopt LED lighting or cost-effectively expand their existing LEDlighting product portfolio. FEATURES Comprehensive solution with driver electronics, optics and core thermals • 700 lm @ 2700, 3000, 3500 and 4000 K CCT • Supports dimming to 5% • Designed to last at least 35,000 hours at L70 • Versatile form factor • Cree IES LM-80 data in support of U. S. DOE ENERGY STAR® qualification • The LMR4 (120 V) is UL-recognized and California Title 24-compliant, and the LMR4 (230 V) complies with multiple international standards 0 R4-EZW Rev CLM-DS03-LM Data Sheet: • Subject to change without notice. www.cree.com/modules 1 Characteristics The following table provides several base order codes for the Cree LED module LMR4, as well as a description of the order-code nomenclature. Color CCT* Nominal Luminous Flux (lm) CRI Input Power Neutral White 4000 K 700 80 12 W Warm White 3500 K 700 80 12 W Warm White 3000 K 700 80 12 W Warm White 2700 K 700 80 12 W Input Voltage/Freq Power Factor Order Code 120 V/60 Hz >.80 LMR040-0700-40F8-10100EW 230 V/50 Hz >.90 LMR040-0700-40F8-20100EW 120 V/60 Hz >.80 LMR040-0700-35F8-10100EW 230 V/50 Hz >.90 LMR040-0700-35F8-20100EW 120 V/60 Hz >.80 LMR040-0700-30F8-10100EW 230 V/50 Hz >.90 LMR040-0700-30F8-20100EW 120 V/60 Hz >.80 LMR040-0700-27F8-10100EW 230 V/50 Hz >.90 LMR040-0700-27F8-20100EW * Refer to section below on chromaticity for more details Note: Cree maintains a tolerance of +/- 7% on flux and power measurements 8 7 6 4 5 1 2 3 REV. DATE NAME DESCRIPTION OF CHANGE Form Factor F F 114.0is constructed with a durable machined alumiThe Cree LED module LMR4 num housing and comes complete with an integrated thermal management 4.00 system. This system conducts heat away from LEDs and transfers it to the mounting plate junction, providing luminaire designers with the flexibility to 15.00 further optimize their thermal design. E E Form factor and measurements are shown below and additional details are 30.00 A A also available by downloading the STEP file from www.cree.com/modules. The standard product configuration consists of the module with the mounting plate attached. A custom fit heat sink is also available and can be ordered separately in units of 10 (part number LMR040-HS00-0000-0000010). D 8 7 6 4 5 1 2 3 The weight of the module with mounting plate is approximately 250 grams 100.89 103.4 and 150 grams for the heat sink. REV. DATE NAME D DESCRIPTION OF CHANGE 114.000 F F 56.97 C C THERMOCOUPLE LOCATION 38.0 (Tc) E E A 79.45 A B B SECTION A-A D D 103.400 UNLESS OTHERWISE SPECIFIED: DRAWN DIMENSIONS ARE IN MM TOLERANCES: A ANGULAR: 2 TWO PLACE DECIMAL NAME DATE -- 04/11/08 CHECKED .25MM C 2 8 7 6 CLM-DS03-LMR4-EZW Rev 0 5 PROPRIETARY AND CONFIDENTIAL INTERPRET GEOMETRIC TOLERANCING PER: MATERIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF CREE LED LIGHTING SOLUTIONS, INC. ANY FINISH REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF CREE , INC. IS PROHIBITED. DO NOT SCALE DRAWING 4 3 38.000 A TITLE: ENG APPR. MFG APPR. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and TrueWhite are registered trademarks and EasyWhite is a CREE (c) CREE 2008 trademark of Cree, Inc. Q.A. THIRD ANGEL PROJECTION 2 MODULE ASSEMBLY Cree, Inc. SIZE DWG. NO. 4600 SiliconREV Drive LAA000054 NC 27703 A C Durham, SHEET 1 OF SCALE:Tel: 1:1 WEIGHT: C4 USA +1.919.313.5300 1 www.cree.com/modules Mcd vs. Angle Operating temperature of the Cree LED Module LMR4 is between 0 °C and 50 °C. The lifetime and performance estimates described in this document apply only if the product’s Thermal Management Guidelines (below) are adhered to and no modifications are made except as described in this document. The LED module is flexible; use of the detachable mounting plate or optional heat sink depends on the design requirements. Secondary optics may be added to the module diffuser and lens but will likely reduce light output and could also alter the color characteristics of the final luminaire design. Thermal Management Guidelines The Cree LED module LMR4 is designed to perform in a variety of environments; however, the LED module lifetime is highly dependent upon the operating temperature. To achieve lifetime and performance estimates, and maintain the warranty, the final design cannot exceed 70 degrees Celsius at thermal equilibrium, based on the thermocouple (Tc) location shown in the Form Factor section above. Photometry The following photometry results are based on independent testing. Intensity (Candlepower ) Summary Angle Mean CP 0 365.33 5 362.08 15 340.77 25 300.22 35 245.59 45 184.32 55 124.33 65 71.01 75 37.00 85 27.62 90 0.10 a Freeware IES viewer that I downloaded Zonal Lumens Summary Zone Lumens %Lamp %Fixt 0-30 242.9 35% 35% 0-40 381.5 55% 55% 0-60 607.6 87% 87% 0-90 700 100% 100% Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and TrueWhite are registered trademarks and EasyWhite is a trademark of Cree, Inc. 3 CLM-DS03-LMR4-EZW Rev 0 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/modules Chromaticity The Cree LED Module LMR4 provides high color consistency around the specified color temperature. Individual LEDs are tested and matched in order to meet the designed chromaticity specification, defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step Code CCT 40F 4000 K 35F 3500 K 30F 3000 K 27F 2700 K x y 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 0.4586 0.4203 0.4684 0.4164 0.4569 0.4000 0.4473 0.4037 Cree EasyWhite Color Temperatures Plotted on the 1931 CIE Curve 0.45 2700K ANSI C78.377 Quadrangle LMR4 EasyWhite Color Temperature 0.44 3000K 0.43 3500K 0.42 4000K CCy 0.41 4500K 27F 0.40 30F 0.39 35F 0.38 40F 0.37 0.36 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and TrueWhite are registered trademarks and EasyWhite is a trademark of Cree, Inc. 4 CLM-DS03-LMR4-EZW Rev 0 0.49 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/modules Order Codes Series LMR = LED Module Round Luminous flux 0700 = 700 lumens nominal CRI 8 = 80 CRI Internal code EZ = EasyWhite SSSSSS-LLLL-CCCC-NNNNNNN Power supply 1 = 120 volt 2 = 230 volt Color temp 27F = 2700 K CCT Form factor 040 = 4-inch diameter Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and TrueWhite are registered trademarks and EasyWhite is a trademark of Cree, Inc. 5 CLM-DS03-LMR4-EZW Rev 0 Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/modules