FR301 THRU FR307 3.0AMP. Fast Recovery Rectifiers VOLTAGE:50 TO 1000V CURRENT:3.0A AXIAL LEAD DO-201AD Specification Features: Case: Epoxy, Molded DEVICE MARKING DIAGRAM Weight: 1.20Gram (Approximately) FR30X KEL High current capability, Low leakage current High surge current capability Finish: All External Surfaces Corrosion Resistant And Terminal Leads Are Readily Solderable Lead And Mounting Surface Temperature For Soldering Purposed: FR30X : Device Name FR301~ FR307 260℃ Max. For 10 Seconds 1/16 Inch From Case KEL : KEL Logo RoHS Compliant Cathode Indicated By Polarity Band Absolute Maximum Ratings Parameter Maximum Repetitive Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectifier Current. (0.375” Lead Length @ TA=75℃) Non-repetitive Peak Forward Surge Current. (8.3mS Single Half Sine-wave) Operating Junction and Storage Temperature Range Thermal Resistance (Junction to Ambient) (Note 1) Electrical Characteristics TA = 25°C unless otherwise noted FR FR FR Symbol 301 302 303 FR 304 FR 305 FR 306 FR 307 Units VRRM 50 100 200 400 600 800 1000 V VR 50 100 200 400 600 800 1000 V IF(AV) 3.0 A IFSM 150 A TJ, TSTG -65 to +150 °C RθJA 20 °C/W TA = 25°C unless otherwise noted Parameter Symbol FR 301 FR 302 FR 303 FR 304 FR 305 FR 306 FR 307 Units Reverse Current @VR IR 5 uA Forward Voltage @3A VF 1.3 V Maximum Reverse Recovery Time (Note 2) TRR Total Capacitance @VR=4V, f=1MHz CT 150 250 50 500 nS pF Apr. 2008 Release / Orig Page 1 FR301 through FR307 Series P re lim in ary Da t a S he et P re lim in ary Da t a S he et NOTE: (1) Thermal resistance from junction to ambient at 0.375” lead length, vertical P.C. board mounted (2) Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A Package Outline Package Case Outline D C A B DO-201AD DO-201AD DIM Millimeters Inches Min Max Min Max A 1.19 1.30 0.046 0.052 B 7.20 9.60 0.285 0.375 C 25.40 --- 1.000 --- D 4.80 5.30 0.190 0.210 Apr. 2008 Release / Orig Page 2