Binning & Labeling Document CLD-26 Rev 3 Product family data sheet / Cree® XLamp® MP-L EasyWhite™ LEDs Product Description FEATURES The XLamp MP-L EasyWhite LED • eliminates traditional chromatic- ity binning and maximizes lumen density, enabling luminaire and bulb retrofit manufacturers to deliver consistent color and required • High lumen density • Wide viewing angle: 125° • Minimum 80 CRI at 2700 K • around the desired color tempera- Relative Luminous Flux vs Current and Solder Point Temperature (Steady-State Conditions)........... 4 RoHS-compliant Typical Spatial Distribution........... 4 ture, which is 94% smaller than Reflow Soldering Characteristics... 5 the total area of the corresponding Bin and Order-Code Format......... 6 ANSI C78.377 color region. The XLamp MP-L EasyWhite LED is the perfect choice for lighting applications where high luminous flux output is required from a single, small point source. Examples of WWW.CREE.COM/XLAMP Electrically neutral thermal path • Product Characteristics. ............... 2 Label with Cree Bin Code, Qty,Flux LotCharacteristics #....................................... @ 150 mA 10 = 25°C)............................... (TJ with Label Customer Order Code,...2 10 Relative Spectral Power Distribution Qty,(IReel ID,mA PO#........................... = 150 per LED)................ 3 10 F Electrical Characteristics (TJ = 25°C)............................... 3 and 3000 K CCT reduce LED-to-LED color variation to within a 2-step MacAdams ellipse Cree EasyWhite color temperatures light output to the target end user. XLamp MP-L EasyWhite LEDs can TABLE OF CONTENTS Performance Groups – Applications • Commercial/residential Brightness................................. 7 direc- Performance Groups – tional lighting Chromaticity.............................. 7 • LED retrofit bulbs Cree EasyWhite Color • General indoor/outdoor illumi- Temperatures Plotted on the 1931 nation CIE Curve.................................. 8 specific applications include: com- Standard Order Codes and Bins mercial/retail spotlights, (MP-L EasyWhite)....................... 9 LED retrofit bulbs, and other indoor Notes...................................... 10 general illumination applications. Mechanical Dimensions............. 12 display Tape and Reel.......................... 13 Packaging................................ 14 Label with Cree Bin Code, Qty, Lot #.................................. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp XLAMP MP-L EASYWHITE LEDS Product Characteristics Characteristics Unit Solder Point Temperature Minimum Typical Maximum °C Viewing Angle (FWHM) - white Temperature Coefficient of Voltage (per LED string) 110 degrees 125 mV/°C -30 ESD Classification (HBM per Mil-Std-883D) Class 2 Total Power, all strings @ 150 mA W 11.3 Total Power, all strings @ 250 mA W 19.9 DC Forward Current, per LED string mA 250 Reverse Current, per LED string mA 0.1 Forward Voltage @ 150 mA, per LED string V 25.0 26.0 Forward Voltage @ 250 mA, per LED string V 26.5 27.5 Moisture Sensitivity Level Rating (MSL) MSL 2A Flux Characteristics @ 150 mA (TJ = 25°C) The following table provides several base order codes for XLamp MP-L EasyWhite LEDs. For additional order codes, as well as a complete description of the order-code nomenclature, please reference pages 6 through 9 of this document. Color CCT Range 4,000 K 3,500 K EasyWhite 4-Step 3,000 K 2,700 K Color CCT Range 4,000 K 3,500 K EasyWhite 2-Step 3,000 K 2,700 K Base Order Codes Min Luminous Flux (lm) Order Code Group Flux (lm) D0 900 MPLEZW-A1-0000-0000D040F E0 1000 MPLEZW-A1-0000-0000E040F B0 700 MPLEZW-A1-0000-0000B035F C0 800 MPLEZW-A1-0000-0000C035F B0 700 MPLEZW-A1-0000-0000B030F C0 800 MPLEZW-A1-0000-0000C030F B0 700 MPLEZW-A1-0000-0000B027F C0 800 MPLEZW-A1-0000-0000C027F Base Order Codes Min Luminous Flux (lm) Notes: • flux and power measurements. • • Flux (lm) D0 900 MPLEZW-A1-0000-0000D040H E0 1000 MPLEZW-A1-0000-0000E040H B0 700 MPLEZW-A1-0000-0000B035H C0 800 MPLEZW-A1-0000-0000C035H B0 700 MPLEZW-A1-0000-0000B030H C0 800 MPLEZW-A1-0000-0000C030H B0 700 MPLEZW-A1-0000-0000B027H C0 800 MPLEZW-A1-0000-0000C027H Minimum CRI for EasyWhite color temperatures 27F, 27H, 30F, 30H is 80. Order Code Group Cree maintains a tolerance of ±7% on Minimum CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 77. • Typical CRI for EasyWhite color temperatures 35F, 35H, 40F, 40H is 80. • Cree maintains a tolerance of ±2 on CRI measurements. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 2 XLAMP MP-L EASYWHITE LEDS Relative Spectral Distribution (I = (If 150=mA per LED) Relative SpectralPower Power Distribution 150 mA) F The following graph represents typical spectral output of the XLamp MPL-EZW LED. The following graph represents typical spectral output of the XLamp MP-L EasyWhite LED with all LEDs on simultane- ously. Relative Radiant Power (%) 100 80 60 40 20 0 400 450 500 550 600 650 700 750 Wavelength (nm) Electrical Characteristics (Tj = 25ºC) The following graphCharacteristics represents typical electrical(T characteristics Electrical = 25°C) of each of the three individual strings of the XLamp MPL-EZW LED. J The following graph represents typical electrical characteristics of an individual string of XLamp MP-L EasyWhite LEDs. Relative Flux Output vs. Junction Temperature (If = 150 mA) 250 Forward Current (mA) 200 150 100 50 0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 Forward Voltage (V) Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 3 XLAMP MP-L EASYWHITE LEDS Relative Luminous Flux vs Current and Solder Point Temperature (Steady-State Conditions) The data below is representative of the XLamp MP-L EasyWhite in steady-state operation with all strings driven equally at the current shown. The relative luminous flux is shown as a percentage of the light output under pulsed test conditions (t=20 ms, If=150 mA, Tsp=Tj=25°C). The XLamp MP-L EasyWhite LED is binned under these pulsed test conditions. 140 Luminous Flux, Relative to Pulsed (%) 120 100 80 150 mA 200 mA 60 250 mA 40 20 0 5 15 25 35 45 55 65 75 85 95 105 Steady-State Solder Point Temperature (°C) Radiation Typical Typical SpatialSpatial Distribution Pattern (If = 150 mA) Typical Spatia The following graph represents typical output of the XLamp MPL-EZW LED. The following graph repres 120 Relative Luminous Intensity (%) 100 80 60 40 20 0 -90 -60 -30 0 30 60 90 Angle (º) Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 4 XLAMP MP-L EASYWHITE LEDS Reflow Soldering Characteristics In testing, Cree has found XLamp MP-L EasyWhite LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of solder paste used. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Based Solder Lead-Free Solder 3°C/second max. 3°C/second max. Preheat: Temperature Min (Tsmin) 100°C 150°C Preheat: Temperature Max (Tsmax) 150°C 200°C 60-120 seconds 60-180 seconds 183°C 217°C 60-150 seconds 60-150 seconds 215°C 260°C 10-30 seconds 20-40 seconds 6°C/second max. 6°C/second max 6 minutes max. 8 minutes max. Average Ramp-Up Rate (Tsmax to Tp) Preheat: Time (tsmin to tsmax) Time Maintained Above: Temperature (TL) Time Maintained Above: Time (tL) Peak/Classification Temperature (Tp) Time Within 5°C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25°C to Peak Temperature Note: All temperatures refer to the topside of the package, measured on the package body surface. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 5 XLAMP MP-L EASYWHITE LEDS Bin and Order-Code Format Bin codes and order codes are configured in the following manner: Order Code Bin Code Series MPL Version number Series MPL Version number Kit number Flux code SSSSSS-BB-NNN-FF-HH-HHHH SSSSSS-BB-HHHH-NNNNNNNNN Internal code Color EZW = EasyWhite Internal code Chromaticity code Color EZW = EasyWhite Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 6 XLAMP MP-L EASYWHITE LEDS Performance Groups – Brightness XLamp MP-L EasyWhite LEDs are tested for luminous flux and placed into one of the following luminous-flux groups: Group Code Min. Luminous Flux @ 150 mA per string (lm) Max. Luminous Flux @ 150 mA per string (lm) A0 600 700 800 B0 700 C0 800 900 D0 900 1000 E0 1000 1100 F0 1100 1200 Performance Groups – Chromaticity XLamp MP-L EasyWhite LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step EasyWhite Color Temperatures – 2-Step Code Code 40F 35F 30F 27F CCT 4000 K 3500 K 3000 K 2700 K x y 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 x y 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3863 0.3981 0.3758 0.3844 0.3778 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589 0.4021 0.4586 0.4060 40H 35H 30H 27H CCT 4000 K 3500 K 3000 K 2700 K Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 7 XLAMP MP-L EASYWHITE LEDS Cree EasyWhite Color Temperatures Plotted on the 1931 CIE Curve 0.45 0.44 0.43 3000K 3500K 0.42 4000K 0.41 CCy 2700K ANSI C78.377 Quadrangle EasyWhite "F" (4-Step) Chromaticity Regions 4500K 27F 0.40 30F 0.39 35F 0.38 40F 0.37 0.36 0.45 0.43 0.49 0.48 0.47 0.46 0.45 0.44 0.43 CCx 2700K ANSI C78.377 Quadrangle EasyWhite "H" (2-Step) Chromaticity Regions 0.44 3000K 3500K 0.42 4000K 0.41 CCy 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 27H 4500K 30H 0.40 35H 0.39 0.38 40H 0.37 0.36 0.49 0.48 0.47 0.46 0.45 0.44 CCx 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 8 XLAMP MP-L EASYWHITE LEDS Standard Order Codes and Bins (MP-L EasyWhite) The following tables list standard kit numbers and performance bins. Kit numbers completely describe an order code’s chromaticity regions and luminous flux range. XLamp MP-L EasyWhite LED Standard Order Codes Min. Luminous Flux (lm) @ 150 mA* Group Flux (lm) Chromaticity Regions Kit Number EasyWhite B0 C0 700 800 D0 900 E0 1000 27F 0000B027F 27H 0000B027H 30F 0000B030F 30H 0000B030H 35F 0000B035F 35H 0000B035H 27F 0000C027F 27H 0000C027H 30F 0000C030F 30H 0000C030H 35F 0000C035F 35H 0000C035H 40F 0000D040F 40H 0000D040H 40F 0000E040F 40H 0000E040H For other flux and chromaticity combinations, contact Cree or an authorized distributor. * Cree XLamp MP-L EasyWhite order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or DWL bin restrictions specified by the order code. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 9 XLAMP MP-L EASYWHITE LEDS Notes Lumen Maintenance Projections Based on internal long-term reliability testing, Cree projects XLamp MP-L EasyWhite LEDs to maintain a mean 70% lumen maintenance after 50,000 hours at maximum rated drive current, provided the LED solder point temperature is maintained at or below 85°C. Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity XLamp MP-L EasyWhite LEDs are shipped in sealed, moisturebarrier bags (MBB) designed for long shelf life. If XLamp MP-L Temp. EasyWhite LEDs are exposed to moist environments after open- Maximum Percent Relative Humidity 30% 40% 50% 60% 70% 80% 90% 35ºC - - - 17 1 .5 .5 ing the MBB packaging but before soldering, damage to the 30ºC - - - 28 1 1 1 LED may occur during the soldering operation. The following 25ºC - - - - 2 1 1 derating table defines the maximum exposure time (in days) 20ºC - - - - 2 1 1 for an XLamp MP-L EasyWhite LED in the listed humidity and temperature conditions. LEDs with exposure time longer than the time specified below must be baked according to the baking conditions listed below. Baking Conditions It is not necessary to bake all XLamp MP-L EasyWhite LEDs. Only the LEDs that meet all of the following criteria must be baked: 1. LEDs that have been removed from the original MBB packaging 2. LEDs that have been exposed to a humid environment longer than listed in the Moisture Sensitivity section above 3. LEDs that have not been soldered LEDs should be baked at 80ºC for 24 hours. LEDs may be baked on the original reels. Remove LEDs from MBB packaging before baking. Do not bake parts at temperatures higher than 80ºC. This baking operation resets the exposure time as defined in the Moisture Sensitivity section above. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 10 XLAMP MP-L EASYWHITE LEDS Storage Conditions XLamp MP-L EasyWhite LEDs that have been removed from the original MBB packaging but not soldered should be stored in one of the following ways: • Store the parts in a rigid metal container with a tight-fitting lid. Verify that the storage temperature is <30°C, and place fresh desiccant and an RH indicator in the container to verify that the RH is no greater than 60%. • Store the parts in a dry, nitrogen-purged cabinet or container that actively maintains the temperature at <30° and the RH at no greater than 60%. • For short-term store only: LEDs can be resealed in the original MBB bag soon after opening. Fresh desiccant may be needed. Use the included humidity indicator card to verify <60% RH. If an environment of <60% RH is not available for storage, XLamp MP-L EasyWhite LEDs should be baked (described above) before reflow soldering. RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim WARNING. Do not look at exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the Cree LED Eye Safety application note. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 11 XLAMP MP-L EASYWHITE LEDS Mechanical Dimensions All measurements are ±.13 mm unless otherwise indicated. 6 5 4 3 2 1 REVISONS NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUTTHE WRITTEN CONSENT OF CREE INC. REV B DESCRIPTION BY DATE ADDED TOLERANCE TO DOME DC 9/9/10 APP'D D D 6.1 ±0.25 12.15 6.075 11.3 0.7250 C 13.15 C 12.3 13.15 7.075 BK BA CK CA RK RA 1.275 11 5 11.4 CONTACT PADS SIZE: 0.70 X 0.85 PITCH: 1.25 12.15 SIDE VIEW BOTTOM VIEW TOP VIEW B B CATHODE(-): BK, CK, RK ANODE(+): BA, CA, RA A THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° SURFACE FINISH: 1.6 6 5 4 3 DATE DRAWN BY D. CRONIN CHECK 4600 Silicon Drive Durham, N.C 27703 05/13/09 DATE -- Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE APPROVED -- -- MATERIAL -- TITLE MXP LAMP PRODUCT OUTLINE SIZE FINAL PROTECTIVE FINISH -2 SCALE C 7.000 REV. DRAWING NO. 2601-00004 SHEET BOF 1 /1 1 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 12 XLAMP MP-L EASYWHITE LEDS Tape and Reel All dimensions in mm. 6 5 4 3 2 1 2400-00009 NOTICE CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION CONTANED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. INDEX QTY ITEM 1 2 1 2 2400-00009-CORE 2400-00009-REEL COMMENTS D D 12.4 +.2 .0 MEASURED AT HUB C 330 +.25 -.75 C 16.4 +0.2 .0 MEASURED AT HUB 1.9±.4 21 ±.4 13.1 ±.2 B B 12.4 +1.0 -.5 MEASURED AT EDGE 60° 60° REVISONS REV A THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .01 .XXX ± .005 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± .06 .XX ± .03 .XXX ± .010 X° ± .5 ° BY DESCRIPTION DRAWN BY D. CRONIN CHECK APPROVED -- APP'D 4600 Silicon Drive Durham, N.C 27703 09/29/09 DATE -- DATE DATE Phone (919) 313-5300 -- Fax (919) 313-5558 A DATE -- MATERIAL ANTI-STATIC HIPS TITLE REEL, 13" X 12MM, 3 PIECE SNAP SIZE DRAWING NO. 2400-00009 C registered Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, Cree logo and registered trademarks 63 of Cree, Inc. SURFACE FINISH: the - XLamp are 0.500 of Cree, Inc. 6 5 4 3 2 1 FINAL PROTECTIVE FINISH SCALE SHEET OF 13 REV. A 1 /1 Dessicant Desiccant XLAMP MP-L EASYWHITE LEDS (inside bag) (inside bag) Humidity Indicator Humidity Indicator Card (inside bag)bag) (inside Packaging Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Vacuum-Sealed Vacuum-Sealed Moisture Barrier Bag Moisture Barrier Bag Label Bin with Cree Bin CREE Code & Barcode Label Code, Qty, Lot # Label CREE Binwith Code Cree Bin & Barcode LabelLot # Code, Qty, Label with Cree Bin Label with Customer P/N, Qty, Lot #, PO## Code, Qty, Lot Label with Cree Bin Label with Customer P/N, Qty,Qty, Lot #, Lot PO # # Code, Patent Label Patent Label Label with Customer Order Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO # Label with Customer Order Code, Qty, Reel ID, PO# Label with Cree Bin Code, Qty, Lot # Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. of Cree, Inc. 14