(Standard type) GU (General Use)-E Type [1-Channel (Form A) Type] VDE TESTING (Reinforced type) PhotoMOS RELAYS FEATURES 6.4±0.05 .252±.002 8.8±0.05 .346±.002 3.9±0.2 .154±.008 6.4±0.05 .252±.002 3.6±0.2 .142±.008 8.8±0.05 .346±.002 mm inch 1 6 2 5 3 4 1. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 2. Control with low-level input signals 3. Controls various types of loads such as relays, motors, lamps and solenoids. 4. Optical coupling for extremely high isolation Unlike mechanical relays, the PhotoMOS relay combines LED and optoelectronic device to transfer signals using light for extremely high isolation. 5. Eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 6. Stable on resistance 7. Low-level off state leakage current 8. Eliminates the need for a power supply to drive the power MOSFET A power supply used to drive the power MOSFET is unnecessary because of the built-in optoelectronic device. This results in easy circuit design and small PC board area. 9. Low thermal electromotive force (Approx. 1 µV) TYPICAL APPLICATIONS • High-speed inspection machines • Telephone equipment • Data communication equipment • Computer TYPES Part No. Output rating* Type I/O isolation Standard 1,500 V AC AC/DC Reinforced 5,000 V Through hole terminal Packing quantity Surface-mount terminal Load voltage Load current 350 V 130 mA AQV210E AQV210EA 400 V 350 V 400 V 120 mA 130 mA 120 mA AQV214E AQV210EH AQV214EH AQV214EA AQV210EHA AQV214EHA Tube packing style Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side AQV210EAX AQV210EAZ AQV214EAX AQV210EHAX AQV214EHAX AQV214EAZ AQV210EHAZ AQV214EHAZ Tube Tape and reel 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Input LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Type of Symconnecbol tion IF VR IFP Pin VL A IL B Output C Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Temperature limits Storage 1 Ipeak Pout PT Viso Topr Tstg AQV210E(A) AQV214E(A) AQV210EH(A) AQV214EH(A) 50 mA 3V 1A 75 mW Remarks f = 100 Hz, Duty factor = 0.1% 350 V 0.13 A 400 V 0.12 A 350 V 0.13 A 400 V 0.12 A 0.15 A 0.17 A 0.13 A 0.15 A 0.15 A 0.17 A 0.13 A 0.15 A 0.4 A 0.3 A 0.4 A 0.3 A A connection: Peak AC, DC; B, C connection: DC A connection: 100 ms (1 shot), VL=DC 500 mW 550 mW 1,500 V AC 5,000 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Non-condensing at low temp. AQV21❍E 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Type of Symconnecbol tion Item LED operate current LED turn off current Input LED dropout voltage Typical Maximum Minimum Typical Typical Maximum IFon — IFoff — VF — Ron A Ron B AQV214E(A) 1.1 mA 1.1 mA AQV210EH(A) AQV214EH(A) 1.6 mA 1.6 mA 3 mA 0.3 mA 1.0 mA Typical Maximum 0.3 mA 0.4 mA 1.0 mA 1.5 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 23 Ω 30 Ω 23 Ω 30 Ω 35 Ω 50 Ω 35 Ω 50 Ω 22.5 Ω 22.5 Ω 11.5 Ω 17.5 Ω 25 Ω 17.5 Ω 25 Ω Typical 6.0 Ω 11.3 Ω 6.0 Ω 11.3 Ω 8.8 Ω 12.5 Ω 8.8 Ω 12.5 Ω 0.7 ms 2.0 ms 0.7 ms 2.0 ms Ron C Cout A 45 pF Off state leakage curMaximum rent — — 1 µA Turn on time* Typical Maximum Ton — Turn off time* Typical Maximum Typical Maximum Toff — Ciso — Riso — Switching speed Transfer characteristics I/O capacitance Initial I/O isolation resistance Typical Minimum 0.5 ms 2.0 ms 0.5 ms 2.0 ms Condition IL = Max. IL = Max. IF = 5 mA 11.5 Ω Maximum Output capacitance 0.4 mA 1.5 mA Maximum Typical On resistance Output AQV210E(A) IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 VB = 0 f = 1 MHz IF = 0 VL = Max. IF= 5 mA** lL=Max. 0.05 ms 1.0 ms 0.8 pF 1.5 pF IF = 5 mA IL = Max. 1,000 MΩ 500 V DC f = 1 MHz VB = 0 Note: Recommendable LED forward current Standard type: 5 mA Reinforced type: 5 to 10 mA *Turn on/Turn off time For type of connection, see page 31. Input 90% Output 10% Ton Toff REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Type of connection:A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 100 80 60 2.0 AQV214E (H) 40 30 AQV210E (H) 20 Turn on time, ms Load current, mA 120 50 AQV210E (H) AQV214E (H) On resistance, Ω 140 1.6 AQV210EH, AQV214EH 1.2 0.8 AQV210E 40 10 0.4 20 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C 0 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 AQV214E –40 –20 0 20 40 60 8085 Ambient temperature, °C 2 AQV21❍E 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.3 0.2 AQV214E AQV210EH, AQV214EH 0.1 LED turn off current, mA LED operate current, mA Turn off time, ms 5 5 0.4 4 3 AQV210EH, AQV214EH 2 4 3 AQV210EH, AQV214EH 2 AQV210E,AQV214E 1 AQV210E,AQV214E 1 AQV210E –40 –20 0 0 20 40 60 8085 Ambient temperature, °C –40 –20 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion Sample: All types LED current: 5 to 50 mA Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F 140 120 100 80 60 40 20 –3 –2 –1 1.4 1.3 50mA 1.2 –5 –4 1.1 10mA 5mA 1.0 0 –40 –20 AQV214E(H) 1 –20 –40 –60 –80 –100 –120 –140 30mA 20mA 0 20 40 60 80 85 Ambient temperature, °C –40 –20 0 20 40 60 8085 Ambient temperature, °C 9. Off state leakage current Measured portion: between terminals 4 and 6; Ambient temperature: 25°C 77°F AQV210E(H) Curremt, mA LED dropout voltage, V 1.5 0 0 20 40 60 8085 Ambient temperature, °C 2 3 4 Voltage, V 5 Off state leakage current, A 0 10–3 –6 10 10–9 AQV214E(H) AQV210E(H) 10–12 0 20 40 80 60 Load voltage, V 100 10-(1). LED forward current vs. turn on time characteristics 10-(2). LED forward current vs. turn on time characteristics 11-(1). LED forward current vs. turn off time characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 1.4 1.0 0.8 0.6 0.10 2.0 0.08 AQV214E Turn off time, ms Turn on time, ms Turn on time, ms 1.2 2.5 AQV210E 1.5 1.0 0.06 AQV214E 0.04 AQV210E 0.4 0.5 0 0.02 AQV210EH, AQV214EH 0.2 10 50 20 30 40 LED forward current, mA 0 60 10 50 20 30 40 LED forward current, mA 60 11-(2). LED forward current vs. turn off time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.15 0.10 AQV210EH, AQV214EH Output capacitance, pF Turn off time, ms 0.20 50 20 30 40 LED forward current, mA 40 30 20 10 0.05 5/7/2001 118 10 50 0.25 0 0 10 50 20 30 40 LED forward current, mA 0 0 10 20 30 40 Applied voltage, V 50 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.