TI1 LM385LP-2-5 micropower voltage reference Datasheet

SLVS023J − JANUARY 1989 − REVISED MARCH 2005
D Operating Current Range . . . 20 µA to
D
D
D
D
D
LM285-2.5 . . . D PACKAGE
LM385-2.5, LM385B-2.5 . . . D OR PW PACKAGE
(TOP VIEW)
20 mA
1.5% and 3% Initial Voltage Tolerance
Reference Impedance
− LM385 . . . 1 Ω Max at 25°C
− All Devices . . . 1.5 Ω Max Over Full
Temperature Range
Very Low Power Consumption
Applications
− Portable Meter References
− Portable Test Instruments
− Battery-Operated Systems
− Current-Loop Instrumentation
− Panel Meters
Interchangeable With Industry-Standard
LM285-2.5 and LM385-2.5
NC
NC
NC
ANODE
1
8
2
7
3
6
4
5
CATHODE
NC
NC
NC
NC − No internal connection
LM285-2.5, LM385-2.5, LM385B-2.5 . . . LP PACKAGE
(TOP VIEW)
ANODE
CATHODE
NC
NC − No internal connection
description/ordering information
These micropower two-terminal band-gap voltage references operate over a 20-µA to 20-mA current range and
feature exceptionally low dynamic impedance and good temperature stability. On-chip trimming provides tight
voltage tolerance. The band-gap reference for these devices has low noise and long-term stability.
ORDERING INFORMATION
TA
VZ
TOLERANCE
PACKAGE†
SOIC (D)
3%
TO226/TO-92 (LP)
TSSOP (PW)
0°C to 70°C
SOIC (D)
1.5%
TO226/TO-92 (LP)
TSSOP (PW)
SOIC (D)
−40°C to 85°C
1.5%
ORDERABLE
PART NUMBER
Tube of 75
LM385D-2-5
Reel of 2000
LM385DR-2-5
Tube of 1000
LM385LP-2-5
Reel of 2000
LM385LPR-2-5
Tube of 150
LM385PW-2-5
Reel of 2000
LM385PWR-2-5
Tube of 75
LM385BD-2-5
Reel of 2000
LM385BDR-2-5
Tube of 1000
LM385BLP-2-5
Reel of 2000
LM385BLPR-2-5
Tube of 150
LM385BPW-2-5
Reel of 2000
LM385BPWR-2-5
Tube of 75
LM285D-2-5
Reel of 2000
LM285DR-2-5
Tube of 1000
LM285LP-2-5
TOP-SIDE
MARKING
385-25
385-25
385-25
385B25
385-25
385B25
285-25
285-25
TO226/TO-92 (LP)
Reel of 2000
LM285LPR-2-5
285-25
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2005, Texas Instruments Incorporated
!"# $ %&'# "$ (&)*%"# +"#'
+&%#$ %! # $('%%"#$ (' #,' #'!$ '-"$ $#&!'#$
$#"+"+ .""#/ +&%# (%'$$0 +'$ # '%'$$"*/ %*&+'
#'$#0 "** (""!'#'$
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
SLVS023J − JANUARY 1989 − REVISED MARCH 2005
description/ordering information (continued)
The design makes these devices exceptionally tolerant of capacitive loading and, thus, easier to use in most
reference applications. The wide dynamic operating temperature range accommodates varying current
supplies, with excellent regulation.
The extremely low power drain of this series makes them useful for micropower circuitry. These voltage
references can be used to make portable meters, regulators, or general-purpose analog circuitry, with battery
life approaching shelf life. The wide operating current range allows them to replace older references with
tighter-tolerance parts.
symbol
ANODE
CATHODE
schematic
CATHODE
Q13
600 kΩ
7.5 kΩ
Q12
Q4
Q7
200 kΩ
Q11
Q3
50 kΩ
Q10
Q1
20 pF
300 kΩ
20 pF
500 Ω
Q9
Q2
Q5
Q6
100 kΩ
500 Ω
Q8
Q14
500 Ω
60 kΩ
ANODE
NOTE A: All component values shown are nominal.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS023J − JANUARY 1989 − REVISED MARCH 2005
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Reverse current, IR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Forward current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Package thermal impedance, θJA (see Notes 1 and 2): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W
LP package . . . . . . . . . . . . . . . . . . . . . . . . . . 140°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . 149°C/W
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) − TA)/θJA. Operation at the absolute maximum TJ of 150°C can affect reliability.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions
IZ
Reference current
TA
Operating free-air temperature range
LM285-2.5
LM385-2.5, LM385B-2.5
MIN
MAX
0.02
20
−40
85
0
70
UNIT
mA
°C
electrical characteristics at specified free-air temperature
PARAMETER
LM285-2.5
LM385-2.5
LM385B-2.5
TEST
CONDITIONS
TA‡
MIN
TYP
MAX
MIN
TYP
MAX
MIN
TYP
MAX
2.462
2.5
2.538
2.425
2.5
2.575
2.462
2.5
2.538
VZ
Reference
voltage
IZ = 20 µA
to 20 mA
25°C
αVZ
Average
temperature
coefficient of
reference
voltage§
IZ = 20 µA
to 20 mA
Full range
∆VZ
Change in
reference
voltage with
current
IZ = 20 µA
to 1 mA
IZ = 1 mA
to 20 mA
∆VZ/∆t
Long-term
change in
reference
voltage
IZ(min)
Minimum
reference
current
zz
Reference
impedance
A
IZ = 100 µA
Vn
Broadband
noise
voltage
IZ = 100 µA,
f = 10 Hz
to 10 kHz
IZ = 100 µA
±20
25°C
±20
1
±20
2
2
1.5
2
2
25°C
10
20
20
Full range
30
30
30
Full range
25°C
±20
8
20
8
0.2
0.6
0.4
Full range
25°C
±20
1.5
120
±20
20
8
1
0.4
1.5
120
V
ppm/°C
Full range
25°C
UNIT
ppm/khr
20
1
1.5
120
mV
µA
Ω
µV
‡ Full range is 0°C to 70°C for the LM385-2.5 and LM385B-2.5, and −40°C to 85°C for the LM285-2.5.
§ The average temperature coefficient of reference voltage is defined as the total change in reference voltage divided by the specified temperature
range.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
SLVS023J − JANUARY 1989 − REVISED MARCH 2005
TYPICAL CHARACTERISTICS†
REVERSE CURRENT
vs
REVERSE VOLTAGE
REFERENCE VOLTAGE CHANGE
vs
REVERSE CURRENT
100
16
TA = −55°C to 125°C
∆V Z − Reference Voltage Change − mV
I R − Reverse Current − µA
TA = −55°C to 125°C
10
1
0.1
0
0.5
1
2.5
2
1.5
12
8
4
0
−4
0.01
3
VR − Reverse Voltage − V
0.1
1
Figure 1
REFERENCE VOLTAGE
vs
FREE-AIR TEMPERATURE
2.525
1.6
IZ = 20 µA to 20 mA
TA = 25°C
1.4
2.52
1.2
2.515
VZ − Reference Voltage − V
V F − Forward Voltage − V
100
Figure 2
FORWARD VOLTAGE
vs
FORWARD CURRENT
1
0.8
0.6
0.4
2.51
2.505
2.5
2.495
2.49
0.2
0
0.01
10
IR − Reverse Current − mA
2.485
0.1
1
10
100
2.48
− 55 − 35 − 15
5
25
45
65
85
105 125
TA − Free-Air Temperature − °C
IF − Forward Current − mA
Figure 3
Figure 4
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS023J − JANUARY 1989 − REVISED MARCH 2005
TYPICAL CHARACTERISTICS†
REFERENCE IMPEDANCE
vs
FREQUENCY
REFERENCE IMPEDANCE
vs
REFERENCE CURRENT
1000
10 k
IZ = 100 µA
TA = 25°C
z z − Reference Impedance − Ω
z z − Reference Impedance − Ω
f = 25 Hz
TA = MIN to MAX‡
100
10
1
0.1
0.01
0.1
1
10
1k
100
10
1
0.1
0.01
100
0.1
1
Iz − Reference Current − mA
NOISE VOLTAGE
vs
FREQUENCY
TA = 25°C
100 µA
Filtered RMS Output Noise Voltage − µV
Vn − Noise Voltage − nV/ Hz
120
IZ = 100 µA
TA = 25°C
1000
800
600
400
200
100
1000
FILTERED RMS OUTPUT NOISE VOLTAGE
vs
FREQUENCY
1400
0
10
100
Figure 6
Figure 5
1200
10
f − Frequency − kHz
1k
10 k
100 k
RC Low Pass
100
R
C
80
60
40
20
0
0.1
f − Frequency − Hz
1
10
100
f − Frequency − kHz
Figure 7
Figure 8
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
‡ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
SLVS023J − JANUARY 1989 − REVISED MARCH 2005
TYPICAL CHARACTERISTICS†
TRANSIENT RESPONSE
Input and Output Voltage − V
4
ÎÎÎ
ÎÎÎ
3
Output
24 kΩ
2
VI
VO
1
0
5
ÎÎ
ÎÎ
Input
0
0
100
t − Time − µs
500
600
Figure 9
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
SLVS023J − JANUARY 1989 − REVISED MARCH 2005
APPLICATION INFORMATION
IO ≈ 60 µA
+
Two Mercury
Cells
2.6 V −
V+
3.3 kΩ
200 kΩ ±1%
LM334
cw
2.00 kΩ ±1%
cw
V−
20 kΩ
500 Ω
412 Ω†
±1%
953 Ω
±1%
LM385-2.5
R
+
Type K
−
Meter
† Adjust for 12.17 mV at 25°C across 412 Ω
Figure 10. Thermocouple Cold-Junction Compensator
3.7 V ≤ V+ ≤ 30 V
V+
LM334
R
V−
2.74 kΩ
2.5 V
LM385-2.5
Figure 11. Operation Over a Wide Supply Range
9V
221 kΩ
2.5 V
LM385-2.5
Figure 12. Reference From a 9-V Battery
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM285D-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
285-25
LM285DE4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
285-25
LM285DG4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
285-25
LM285DR-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
285-25
LM285DRE4-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
285-25
LM285DRG4-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
285-25
LM285LP-2-5
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
-40 to 85
285-25
LM285LPE3-2-5
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
-40 to 85
285-25
LM285LPR-2-5
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
-40 to 85
285-25
LM285LPRE3-2-5
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
-40 to 85
285-25
LM385BD-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BDE4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BDG4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BDR-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BDRE4-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BDRG4-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BLP-2-5
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385B25
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
Orderable Device
Status
(1)
Package Type Package Pins Package
Drawing
Qty
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
(4)
LM385BLPE3-2-5
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385B25
LM385BLPR-2-5
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385B25
LM385BLPRE3-2-5
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385B25
LM385BPWR-2-5
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BPWRE4-2-5
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385BPWRG4-2-5
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385B25
LM385D-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
LM385DE4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
LM385DG4-2-5
ACTIVE
SOIC
D
8
75
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
LM385DR-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
LM385DRE4-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
LM385DRG4-2-5
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
LM385LP-2-5
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385-25
LM385LPE3-2-5
ACTIVE
TO-92
LP
3
1000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385-25
LM385LPR-2-5
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385-25
LM385LPRE3-2-5
ACTIVE
TO-92
LP
3
2000
Pb-Free
(RoHS)
CU SN
N / A for Pkg Type
0 to 70
385-25
LM385PWR-2-5
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
LM385PWRE4-2-5
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
0 to 70
385-25
Addendum-Page 2
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
11-Apr-2013
Status
(1)
LM385PWRG4-2-5
ACTIVE
Package Type Package Pins Package
Drawing
Qty
TSSOP
PW
8
2000
Eco Plan
Lead/Ball Finish
(2)
Green (RoHS
& no Sb/Br)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
CU NIPDAU
Level-1-260C-UNLIM
(4)
0 to 70
385-25
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 3
Samples
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
LM285DR-2-5
Package Package Pins
Type Drawing
SOIC
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
LM385BDR-2-5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
LM385BPWR-2-5
TSSOP
PW
8
2000
330.0
12.4
7.0
3.6
1.6
8.0
12.0
Q1
LM385DR-2-5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
LM385PWR-2-5
TSSOP
PW
8
2000
330.0
12.4
7.0
3.6
1.6
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
LM285DR-2-5
SOIC
D
8
2500
340.5
338.1
20.6
LM385BDR-2-5
SOIC
D
8
2500
340.5
338.1
20.6
LM385BPWR-2-5
TSSOP
PW
8
2000
367.0
367.0
35.0
LM385DR-2-5
SOIC
D
8
2500
340.5
338.1
20.6
LM385PWR-2-5
TSSOP
PW
8
2000
367.0
367.0
35.0
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
Similar pages