AD ADUM1201CRZ-RL7 Dual-channel digital isolator Datasheet

Dual-Channel Digital Isolators
ADuM1200/ADuM1201
FEATURES
GENERAL DESCRIPTION
Narrow body SOIC 8-lead package
Low power operation
5 V operation
1.1 mA per channel maximum @ 0 Mbps to 2 Mbps
3.7 mA per channel maximum @ 10 Mbps
8.2 mA per channel maximum @ 25 Mbps
3 V operation
0.8 mA per channel maximum @ 0 Mbps to 2 Mbps
2.2 mA per channel maximum @ 10 Mbps
4.8 mA per channel maximum @ 25 Mbps
Bidirectional communication
3 V/5 V level translation
High temperature operation: 105°C
High data rate: dc to 25 Mbps (NRZ)
Precise timing characteristics
3 ns maximum pulse-width distortion
3 ns maximum channel-to-channel matching
High common-mode transient immunity: > 25 kV/µs
Safety and regulatory approvals
UL recognition
2500 V rms for 1 minute per UL 1577
CSA component acceptance notice #5A
VDE certificate of conformity
DIN EN 60747-5-2 (VDE 0884 Part 2): 2003-01
DIN EN 60950 (VDE 0805): 2001-12; DIN EN 60950: 2000
VIORM = 560 V peak
The ADuM120x are dual-channel digital isolators based on
Analog Devices’ iCoupler® technology. Combining high speed
CMOS and monolithic transformer technology, these isolation
components provide outstanding performance characteristics
superior to alternatives such as optocoupler devices.
APPLICATIONS
Size-critical multichannel isolation
SPI® interface/data converter isolation
RS-232/RS-422/RS-485 transceiver isolation
Digital field bus isolation
By avoiding the use of LEDs and photodiodes, iCoupler devices
remove the design difficulties commonly associated with
optocouplers. The typical optocoupler concerns regarding
uncertain current transfer ratios, nonlinear transfer functions,
and temperature and lifetime effects are eliminated with the
simple iCoupler digital interfaces and stable performance
characteristics. The need for external drivers and other discrete
components is eliminated with these iCoupler products.
Furthermore, iCoupler devices consume one-tenth to one-sixth
the power of optocouplers at comparable signal data rates.
The ADuM120x isolators provide two independent isolation
channels in a variety of channel configurations and data rates
(see the Ordering Guide). Both parts operate with the supply
voltage on either side ranging from 2.7 V to 5.5 V, providing
compatibility with lower voltage systems as well as enabling a
voltage translation functionality across the isolation barrier. In
addition, the ADuM120x provide low pulse-width distortion
(< 3 ns for CR grade) and tight channel-to-channel matching
(< 3 ns for CR grade). Unlike other optocoupler alternatives, the
ADuM120x isolators have a patented refresh feature that
ensures dc correctness in the absence of input logic transitions
and during power-up/power-down conditions.
VDD1 1
8
VDD2
VDD1 1
8
VDD2
ENCODE
DECODE
7
VOA
VOA 2
DECODE
ENCODE
7
VIA
VIB 3
ENCODE
DECODE
6
VOB
VIB 3
ENCODE
DECODE
6
VOB
5
GND2
5
GND2
GND1 4
04642-0-001
VIA 2
Figure 1. ADuM1200 Functional Block Diagram
GND1 4
04642-0-002
FUNCTIONAL BLOCK DIAGRAMS
Figure 2. ADuM1201 Functional Block Diagram
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703
© 2004 Analog Devices, Inc. All rights reserved.
ADuM1200/ADuM1201
TABLE OF CONTENTS
Specifications..................................................................................... 3
ESD Caution................................................................................ 12
Electrical Characteristics—5 V Operation................................ 3
Pin Configurations and Function Descriptions ......................... 13
Electrical Characteristics—3 V Operation................................ 5
Typical Performance Characteristics ........................................... 14
Electrical Characteristics—Mixed 5 V/3 V or 3 V/5 V
Operation....................................................................................... 7
Application Information................................................................ 15
Package Characteristics ............................................................. 10
Regulatory Information............................................................. 10
Insulation and Safety-Related Specifications.......................... 10
PC Board Layout ........................................................................ 15
Propagation Delay-Related Parameters................................... 15
DC Correctness and Magnetic Field Immunity........................... 15
Power Consumption .................................................................. 16
DIN EN 60747-5-2 (VDE 0884 Part 2) Insulation
Characteristics ............................................................................ 11
Outline Dimensions ....................................................................... 17
Recommended Operating Conditions .................................... 11
Ordering Guide .......................................................................... 17
Absolute Maximum Ratings.......................................................... 12
REVISION HISTORY
9/04—Data Sheet Changed from Rev. A to Rev. B
Changes to Table 5.......................................................................... 10
6/04—Data Sheet Changed from Rev. 0 to Rev. A
Changes to Format .............................................................Universal
Changes to General Description .................................................... 1
Changes to Electrical Characteristics—5 V Operation ............... 3
Changes to Electrical Characteristics—3 V Operation ............... 5
Changes to Electrical Characteristics—Mixed 5 V/3 V or
3 V/5 V Operation ............................................................................ 7
4/04—Revision 0: Initial Version
Rev. B | Page 2 of 20
ADuM1200/ADuM1201
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS—5 V OPERATION
All voltages are relative to their respective ground. 4.5 V ≤ VDD1 ≤ 5.5 V, 4.5 V ≤ VDD2 ≤ 5.5 V. All min/max specifications apply over the
entire recommended operating range, unless otherwise noted. All typical specifications are at TA = 25°C, VDD1 = VDD2 = 5 V.
Table 1.
Parameter
DC SPECIFICATIONS
Input Supply Current, per Channel, Quiescent
Output Supply Current, per Channel, Quiescent
ADuM1200, Total Supply Current, Two Channels1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (CR Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM1201, Total Supply Current, Two Channels1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (CR Grade Only)
VDD1 Supply Current
VDD2 Supply Current
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
Logic High Output Voltages
Symbol
Typ
Max
Unit
IDDI (Q)
IDDO (Q)
0.50
0.19
0.60
0.25
mA
mA
IDD1 (Q)
IDD2 (Q)
1.1
0.5
1.4
0.8
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
4.3
1.3
5.5
2.0
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (25)
IDD2 (25)
10
2.8
13
3.4
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
IDD1 (Q)
IDD2 (Q)
0.8
0.8
1.1
1.1
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
2.8
2.8
3.5
3.5
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (25)
IDD2 (25)
6.3
6.3
8.0
8.0
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
+0.01
+10
µA
V
V
0 ≤ VIA, VIB ≤ VDD1 or VDD2
5.0
V
IOx = −20 µA, VIx = VIxH
4.8
V
IOx = −4 mA, VIx = VIxH
0.1
0.1
0.4
V
V
V
IOx = 20 µA, VIx = VIxL
IOx = 400 µA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
1000
ns
Mbps
ns
ns
ns
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
IIA, IIB
VIH
VIL
−10
0.7 VDD1, VDD2
VOAH
VDD1,
VDD2 − 0.1
VDD1,
VDD2 − 0.5
VOBH
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM120xAR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH − tPHL|4
Propagation Delay Skew5
Channel-to-Channel Matching6
Output Rise/Fall Time (10% to 90%)
Min
0.3 VDD1,
VDD2
VOAL
VOBL
0.0
0.04
0.2
PW
tPHL, tPLH
PWD
tPSK
tPSKCD/OD
tR/tF
1
50
150
40
100
50
10
Rev. B | Page 3 of 20
Test Conditions
ADuM1200/ADuM1201
Parameter
ADuM120xBR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH − tPHL|4
Change Versus Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing Directional Channels6
Output Rise/Fall Time (10% to 90%)
ADuM120xCR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH – tPHL|4
Change Versus Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing Directional Channels6
Output Rise/Fall Time (10% to 90%)
For All Models
Common-Mode Transient Immunity
at Logic High Output7
Common-Mode Transient Immunity
at Logic Low Output7
Refresh Rate
Input Dynamic Supply Current, per Channel8
Output Dynamic Supply Current, per Channel8
Symbol
Min
Typ
PW
Max
Unit
Test Conditions
100
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSK
tPSKCD
15
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
15
ns
CL = 15 pF, CMOS signal levels
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPHL, tPLH
PWD
10
20
50
3
5
tR/tF
2.5
PW
tPSK
tPSKCD
15
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
15
ns
CL = 15 pF, CMOS signal levels
2.5
ns
CL = 15 pF, CMOS signal levels
VIx = VDD1, VDD2, VCM = 1000 V,
transient magnitude = 800 V
VIx = 0 V, VCM = 1000 V,
transient magnitude = 800 V
tPHL, tPLH
PWD
25
20
20
50
40
45
3
5
tR/tF
|CMH|
25
35
kV/µs
|CML|
25
35
kV/µs
1.2
0.19
0.05
Mbps
mA/Mbps
mA/Mbps
fr
IDDI (D)
IDDO (D)
1
The supply current values for both channels are combined when running at identical data rates. Output supply current values are specified with no output load
present. The supply current associated with an individual channel operating at a given data rate may be calculated as described in the Power Consumption section. See
Figure 6 through Figure 8 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 9 through Figure 11
for total IDD1 and IDD2 supply currents as a function of data rate for ADuM1200 and ADuM1201 channel configurations.
2
The minimum pulse width is the shortest pulse width at which the specified pulse-width distortion is guaranteed.
3
The maximum data rate is the fastest data rate at which the specified pulse-width distortion is guaranteed.
4
tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is
measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal.
5
tPSK is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating temperature, supply voltages, and output
load within the recommended operating conditions.
6
Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of
the isolation barrier. Opposing directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with
inputs on opposing sides of the isolation barrier.
7
CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient
magnitude is the range over which the common mode is slewed.
8
Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in the signal data rate. See Figure 6 through Figure 8 for
information on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating per-channel supply
current for a given data rate.
Rev. B | Page 4 of 20
ADuM1200/ADuM1201
ELECTRICAL CHARACTERISTICS—3 V OPERATION
All voltages are relative to their respective ground. 2.7 V ≤ VDD1 ≤ 3.6 V, 2.7 V ≤ VDD2 ≤ 3.6 V. All min/max specifications apply over the
entire recommended operating range, unless otherwise noted. All typical specifications are at TA = 25°C, VDD1 = VDD2 = 3.0 V.
Table 2.
Parameter
DC SPECIFICATIONS
Input Supply Current, per Channel, Quiescent
Output Supply Current, per Channel, Quiescent
ADuM1200, Total Supply Current, Two Channels1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (CR Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM1201, Total Supply Current, Two Channels1
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (CR Grade Only)
VDD1 Supply Current
VDD2 Supply Current
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
Logic High Output Voltages
Symbol
Typ
Max
Unit
IDDI (Q)
IDDO (Q)
0.26
0.11
0.35
0.20
mA
mA
IDD1 (Q)
IDD2 (Q)
0.6
0.2
1.0
0.6
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
2.2
0.7
3.4
1.1
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (25)
IDD2 (25)
5.2
1.5
7.7
2.0
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
IDD1 (Q)
IDD2 (Q)
0.4
0.4
0.8
0.8
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
IDD1 (10)
IDD2 (10)
1.5
1.5
2.2
2.2
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDD1 (25)
IDD2 (25)
3.4
3.4
4.8
4.8
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
−10
0.7 VDD1, VDD2
0.01
10
µA
V
0 ≤ VIA, VIB, ≤ VDD1 or VDD2
VDD1,
VDD2 − 0.1
VDD1,
VDD2 − 0.5
3.0
V
IOx = −20 µA, VIx = VIxH
2.8
V
IOx = −4 mA, VIx = VIxH
0.1
0.1
0.4
V
V
V
IOx = 20 µA, VIx = VIxL
IOx = 400 µA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
1000
ns
Mbps
ns
ns
ns
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
IIA, IIB
VIH
VIL
VOAH
VOBH
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM120xAR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH − tPHL|4
Propagation Delay Skew5
Channel-to-Channel Matching6
Output Rise/Fall Time (10% to 90%)
Min
0.3 VDD1, VDD2
VOAL
VOBL
0.0
0.04
0.2
PW
tPHL, tPLH
PWD
tPSK
tPSKCD/OD
tR/tF
Test Conditions
1
50
150
40
100
50
10
Rev. B | Page 5 of 20
ADuM1200/ADuM1201
Parameter
ADuM120xBR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH −tPHL|4
Change Versus Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing Directional Channels6
Output Rise/Fall Time (10% to 90%)
ADuM120xCR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH − tPHL|4
Change Versus Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing Directional Channels6
Output Rise/Fall Time (10% to 90%)
For All Models
Common Mode Transient Immunity
at Logic High Output7
Common Mode Transient Immunity
at Logic Low Output7
Refresh Rate
Input Dynamic Supply Current, per Channel8
Output Dynamic Supply Current, per Channel8
Symbol
Min
Typ
PW
Max
Unit
Test Conditions
100
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSK
tPSKCD
22
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
22
ns
CL = 15 pF, CMOS signal levels
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPHL, tPLH
PWD
10
20
60
3
5
tR/tF
3.0
PW
tPSK
tPSKCD
16
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
16
ns
CL = 15 pF, CMOS signal levels
3.0
ns
CL = 15 pF, CMOS signal levels
VIx = VDD1, VDD2, VCM = 1000 V,
transient magnitude = 800 V
VIx = 0 V, VCM = 1000 V,
transient magnitude = 800 V
tPHL, tPLH
PWD
25
20
20
50
40
55
3
5
tR/tF
|CMH|
25
35
kV/µs
|CML|
25
35
kV/µs
1.1
0.10
0.03
Mbps
mA/Mbps
mA/Mbps
fr
IDDI (D)
IDDO (D)
1
The supply current values for both channels are combined when running at identical data rates. Output supply current values are specified with no output load
present. The supply current associated with an individual channel operating at a given data rate may be calculated as described in the Power Consumption section. See
Figure 6 through Figure 8 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 9 through Figure 11
for total IDD1 and IDD2 supply currents as a function of data rate for ADuM1200 and ADuM1201 channel configurations.
2
The minimum pulse width is the shortest pulse width at which the specified pulse-width distortion is guaranteed.
3
The maximum data rate is the fastest data rate at which the specified pulse-width distortion is guaranteed.
4
tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is
measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal.
5
tPSK is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating temperature, supply voltages, and output
load within the recommended operating conditions.
6
Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of
the isolation barrier. Opposing directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with
inputs on opposing sides of the isolation barrier.
7
CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient
magnitude is the range over which the common mode is slewed.
8
Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in the signal data rate. See Figure 6 through Figure 8 for
information on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating per-channel supply
current for a given data rate.
Rev. B | Page 6 of 20
ADuM1200/ADuM1201
ELECTRICAL CHARACTERISTICS—MIXED 5 V/3 V OR 3 V/5 V OPERATION
All voltages are relative to their respective ground. 5 V/3 V operation: 4.5 V ≤ VDD1 ≤ 5.5 V, 2.7 V ≤ VDD2 ≤ 3.6 V. 3 V/5 V operation: 2.7 V ≤
VDD1 ≤ 3.6 V, 4.5 V ≤ VDD2 ≤ 5.5 V. All min/max specifications apply over the entire recommended operating range, unless otherwise noted.
All typical specifications are at TA = 25°C; VDD1 = 3.0 V, VDD2 = 5.0 V; or VDD1 = 5.0 V, VDD2 = 3.0 V.
Table 3.
Parameter
DC SPECIFICATIONS
Input Supply Current, per Channel, Quiescent
5 V/3 V Operation
3 V/5 V Operation
Output Supply Current, per Channel, Quiescent
5 V/3 V Operation
3 V/5 V Operation
ADuM1200, Total Supply Current, Two Channels1
DC to 2 Mbps
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
25 Mbps (CR Grade Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
ADuM1201, Total Supply Current, Two Channels1
DC to 2 Mbps
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
Symbol
Min
Typ
Max
0.50
0.26
0.6
0.35
0.11
0.19
0.20
0.25
mA
mA
mA
mA
mA
mA
1.1
0.6
1.4
1.0
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
0.2
0.5
0.6
0.8
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
4.3
2.2
5.5
3.4
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
0.7
1.3
1.1
2.0
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
10
5.2
13
7.7
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
1.5
2.8
2.0
3.4
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
0.8
0.4
1.1
0.8
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
0.4
0.8
0.8
1.1
mA
mA
DC to 1 MHz logic signal freq.
DC to 1 MHz logic signal freq.
2.8
1.5
3.5
2.2
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
1.5
2.8
2.2
3.5
mA
mA
5 MHz logic signal freq.
5 MHz logic signal freq.
IDDI (Q)
IDDO (Q)
Unit
Test Conditions
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
IDD1 (25)
IDD2 (25)
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
Rev. B | Page 7 of 20
ADuM1200/ADuM1201
Parameter
25 Mbps (CR Grade Only)
VDD1 Supply Current
5 V/3 V Operation
3 V/5 V Operation
VDD2 Supply Current
5 V/3 V Operation
3 V/5 V Operation
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
5 V/3 V Operation
3 V/5 V Operation
Logic High Output Voltages
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM120xAR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH − tPHL|4
Propagation Delay Skew5
Channel-to-Channel Matching6
Output Rise/Fall Time (10% to 90%)
ADuM120xBR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH − tPHL|4
Change Versus Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing Directional Channels6
Output Rise/Fall Time (10% to 90%)
5 V/3 V Operation
3 V/5 V Operation
Symbol
Min
Typ
Max
Unit
Test Conditions
6.3
3.4
8.0
4.8
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
3.4
6.3
4.8
8.0
mA
mA
12.5 MHz logic signal freq.
12.5 MHz logic signal freq.
0.01
10
µA
V
V
V
V
V
0 ≤ VIA, VIB ≤ VDD1 or VDD2
V
IOx = −4 mA, VIx = VIxH
0.1
0.1
0.4
V
V
V
IOx = 20 µA, VIx = VIxL
IOx = 400 µA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
1000
ns
Mbps
ns
ns
ns
ns
ns
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
IDD1 (25)
IDD2 (25)
IIA, IIB
VIH
VIL
VOAH,
VOBH
−10
0.7 VDD1, VDD2
0.3 VDD1, VDD2
0.8
0.4
VDD1,
VDD2 − 0.1
VDD1,
VDD2 − 0.5
VOAL, VOBL
VDD1,
VDD2
VDD1,
VDD2 − 0.2
0.0
0.04
0.2
PW
tPHL, tPLH
PWD
tPSK
tPSKCD/OD
tR/tF
1
50
150
40
50
50
10
PW
tPSK
tPSKCD
22
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
22
ns
tPHL, tPLH
PWD
100
10
15
55
3
5
tR/tf
IOx = −20 µA, VIx = VIxH
CL = 15 pF, CMOS signal levels
3.0
2.5
Rev. B | Page 8 of 20
ns
ns
ADuM1200/ADuM1201
Parameter
ADuM120xCR
Minimum Pulse Width2
Maximum Data Rate3
Propagation Delay4
Pulse-Width Distortion, |tPLH – tPHL|4
Change Versus Temperature
Propagation Delay Skew5
Channel-to-Channel Matching,
Codirectional Channels6
Channel-to-Channel Matching,
Opposing Directional Channels6
Output Rise/Fall Time (10% to 90%)
5 V/3 V Operation
3 V/5 V Operation
For All Models
Common-Mode Transient Immunity
at Logic High Output7
Common-Mode Transient Immunity
at Logic Low Output7
Refresh Rate
5 V/3 V Operation
3 V/5 V Operation
Input Dynamic Supply Current, per Channel8
5 V/3 V Operation
3 V/5 V Operation
Output Dynamic Supply Current, per Channel8
5 V/3 V Operation
3 V/5 V Operation
Symbol
Min
PW
Typ
Max
Unit
Test Conditions
20
50
40
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
CL = 15 pF, CMOS signal levels
tPSK
tPSKCD
15
3
ns
Mbps
ns
ns
ps/°C
ns
ns
tPSKOD
15
ns
tPHL, tPLH
PWD
25
20
50
3
5
tR/tf
CL = 15 pF, CMOS signal levels
3.0
2.5
ns
ns
|CMH|
25
35
kV/µs
|CML|
25
35
kV/µs
1.2
1.1
Mbps
Mbps
0.19
0.10
mA/Mbps
mA/Mbps
0.03
0.05
mA/Mbps
mA/Mbps
VIx = VDD1, VDD2, VCM = 1000 V,
transient magnitude = 800 V
VIx = 0 V, VCM = 1000 V,
transient magnitude = 800 V
fr
IDDI (D)
IDDI (D)
1
The supply current values for both channels are combined when running at identical data rates. Output supply current values are specified with no output load
present. The supply current associated with an individual channel operating at a given data rate may be calculated as described in the Power Consumption section. See
Figure 6 through Figure 8 for information on per-channel supply current as a function of data rate for unloaded and loaded conditions. See Figure 9 through Figure 11
for total IDD1 and IDD2 supply currents as a function of data rate for ADuM1200 and ADuM1201 channel configurations.
2
The minimum pulse width is the shortest pulse width at which the specified pulse-width distortion is guaranteed.
3
The maximum data rate is the fastest data rate at which the specified pulse-width distortion is guaranteed.
4
tPHL propagation delay is measured from the 50% level of the falling edge of the VIx signal to the 50% level of the falling edge of the VOx signal. tPLH propagation delay is
measured from the 50% level of the rising edge of the VIx signal to the 50% level of the rising edge of the VOx signal.
5
tPSK is the magnitude of the worst-case difference in tPHL and/or tPLH that is measured between units at the same operating temperature, supply voltages, and output
load within the recommended operating conditions.
6
Codirectional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with inputs on the same side of
the isolation barrier. Opposing directional channel-to-channel matching is the absolute value of the difference in propagation delays between any two channels with
inputs on opposing sides of the isolation barrier.
7
CMH is the maximum common-mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common-mode voltage slew rate
that can be sustained while maintaining VO < 0.8 V. The common-mode voltage slew rates apply to both rising and falling common-mode voltage edges. The transient
magnitude is the range over which the common mode is slewed.
8
Dynamic supply current is the incremental amount of supply current required for a 1 Mbps increase in the signal data rate. See Figure 6 through Figure 8 for
information on per-channel supply current for unloaded and loaded conditions. See the Power Consumption section for guidance on calculating per-channel supply
current for a given data rate.
Rev. B | Page 9 of 20
ADuM1200/ADuM1201
PACKAGE CHARACTERISTICS
Table 4.
Parameter
Resistance (Input-Output)1
Capacitance (Input-Output)1
Input Capacitance
IC Junction-to-Case Thermal Resistance, Side 1
Symbol
RI-O
CI-O
CI
θJCI
IC Junction-to-Case Thermal Resistance, Side 2
θJCO
1
Min
Typ
1012
1.0
4.0
46
41
Max
Unit
Ω
pF
pF
°C/W
Test Conditions
f = 1 MHz
Thermocouple located at center of
package underside
°C/W
The device is considered a 2-terminal device; Pins 1, 2, 3, and 4 are shorted together, and Pins 5, 6, 7, and 8 are shorted together.
REGULATORY INFORMATION
The ADuM1200/ADuM1201 have been approved by the following organizations:
Table 5.
UL
Recognized under 1577 Component
Recognition Program1
2500 V rms isolation voltage
CSA
Approved under CSA Component
Acceptance Notice #5A
VDE
Certified according to
DIN EN 60747-5-2 (VDE 0884 Part 2): 2003-012
Basic insulation, 560 V peak
Complies with DIN EN 60747-5-2 (VDE 0884
Part 2): 2003-01, DIN EN 60950 (VDE 0805): 2001-12;
EN 60950: 2000, Reinforced insulation, 560 V peak
File E214100
1
2
File 2471900-4880-0001
File 205078
In accordance with UL1577, each ADuM120x is proof-tested by applying an insulation test voltage ≥ 3000 V rms for 1 second (current leakage detection limit = 5 µA).
In accordance with DIN EN 60747-5-2, each ADuM120x is proof-tested by applying an insulation test voltage ≥ 1050 V peak for 1 second (partial discharge detection
limit = 5 pC).
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 6.
Parameter
Rated Dielectric Insulation Voltage
Minimum External Air Gap (Clearance)
Symbol
Minimum External Tracking (Creepage)
Minimum Internal Gap (Internal
Clearance)
Tracking Resistance (Comparative
Tracking Index)
Isolation Group
L(I01)
Value
2500
4.90 min
Unit
V rms
mm
L(I02)
4.01 min
mm
0.017 min
mm
Conditions
1 minute duration
Measured from input terminals to output terminals, shortest
distance through air
Measured from input terminals to output terminals, shortest
distance path along body
Insulation distance through insulation
>175
V
DIN IEC 112/VDE 0303 Part 1
CTI
IIIa
Material Group (DIN VDE 0110, 1/89, Table 1)
Rev. B | Page 10 of 20
ADuM1200/ADuM1201
DIN EN 60747-5-2 (VDE 0884 PART 2) INSULATION CHARACTERISTICS
Table 7.
Description
Installation Classification per DIN VDE 0110
For Rated Mains Voltage ≤ 150 V rms
For Rated Mains Voltage ≤ 300 V rms
For Rated Mains Voltage ≤ 400 V rms
Climatic Classification
Pollution Degree (DIN VDE 0110, Table 1)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b1
VIORM × 1.875 = VPR, 100% Production Test, tm = 1 sec, Partial Discharge < 5 pC
Input to Output Test Voltage, Method a
After Environmental Tests Subgroup 1
VIORM × 1.6 = VPR, tm = 60 sec, Partial Discharge < 5 pC
After Input and/or Safety Test Subgroup 2/3
VIORM × 1.2 = VPR, tm = 60 sec, Partial Discharge < 5 pC
Highest Allowable Overvoltage (Transient Overvoltage, tTR = 10 sec)
Safety-Limiting Values (maximum value allowed in the event of a failure; also see the thermal
derating curve, Figure 3)
Case Temperature
Side 1 Current
Side 2 Current
Insulation Resistance at TS, VIO = 500 V
Symbol
Characteristic
Unit
VIORM
VPR
I−IV
I−III
I−II
40/105/21
2
560
1050
V peak
V peak
VPR
896
672
V peak
VTR
4000
V peak
TS
IS1
IS2
RS
150
160
170
>109
°C
mA
mA
Ω
Note that the “*” marking on the package denotes DIN EN 60747-5-2 approval for a 560 V peak working voltage.
This isolator is suitable for basic isolation only within the safety limit data. Maintenance of the safety data is ensured by protective circuits.
200
RECOMMENDED OPERATING CONDITIONS
160
Table 8.
140
Parameter
Operating Temperature
Supply Voltages1
Input Signal Rise and Fall Times
SIDE #2
SIDE #1
120
100
80
Symbol
TA
VDD1, VDD2
Min
−40
2.7
Max
+105
5.5
1.0
Unit
°C
V
ms
60
1
40
20
0
0
50
100
150
CASE TEMPERATURE (°C)
200
All voltages are relative to their respective ground. See the DC Correctness and
Magnetic Field Immunity section for information on immunity to external
magnetic fields.
04642-0-003
SAFETY-LIMITING CURRENT (mA)
180
Figure 3. Thermal Derating Curve, Dependence of SafetyLimiting Values on Case Temperature, per DIN EN 60747-5-2
Rev. B | Page 11 of 20
ADuM1200/ADuM1201
ABSOLUTE MAXIMUM RATINGS
Ambient temperature = 25°C, unless otherwise noted.
Table 9.
Parameter
Storage Temperature
Ambient Operating Temperature
Supply Voltages1
Input Voltage,1, 2
Output Voltage1, 2
Average Output Current, per Pin3
Common-Mode Transients4
Symbol
TST
TA
VDD1, VDD2
VIA, VIB
VOA, VOB
IO
Min
−55
−40
−0.5
−0.5
−0.5
−35
−100
Max
150
105
7.0
VDDI + 0.5
VDDO + 0.5
35
+100
Unit
°C
°C
V
V
V
mA
kV/µs
1
All voltages are relative to their respective ground.
VDDI and VDDO refer to the supply voltages on the input and output sides of a given channel, respectively.
See Figure 3 for maximum rated current values for various temperatures.
4
Refers to common-mode transients across the insulation barrier. Common-mode transients exceeding the Absolute Maximum Rating may cause latch-up or
permanent damage.
2
3
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
Functional operation of the device at these or any other conditions above those listed in the operational sections of this specification is
not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Table 10. ADuM1200 Truth Table (Positive Logic)
VIA Input
H
L
H
L
X
VIB Input
H
L
L
H
X
VDD1 State
Powered
Powered
Powered
Powered
Unpowered
VDD2 State
Powered
Powered
Powered
Powered
Powered
VOA Output
H
L
H
L
H
VOB Output
H
L
L
H
H
X
X
Powered
Unpowered
Indeterminate
Indeterminate
Notes
Outputs return to the input state within 1 µs
of VDDI power restoration.
Outputs return to the input state within 1 µs
of VDDO power restoration.
Table 11. ADuM1201 Truth Table (Positive Logic)
VIA Input
H
L
H
L
X
VIB Input
H
L
L
H
X
VDD1 State
Powered
Powered
Powered
Powered
Unpowered
VDD2 State
Powered
Powered
Powered
Powered
Powered
VOA Output
H
L
H
L
Indeterminate
VOB Output
H
L
L
H
H
X
X
Powered
Unpowered
H
Indeterminate
Rev. B | Page 12 of 20
Notes
Outputs return to the input state within 1 µs
of VDD1 power restoration.
Outputs return to the input state within 1 µs
of VDDO power restoration.
ADuM1200/ADuM1201
GND1 4
5 GND2
VDD1 1 ADuM1201 8 VDD2
VOA 2 TOP VIEW 7 VIA
VIB 3 (Not to Scale) 6 VOB
04642-0-004
VDD1 1 ADuM1200 8 VDD2
VIA 2 TOP VIEW 7 VOA
VIB 3 (Not to Scale) 6 VOB
GND1 4
Figure 4. ADuM1200 Pin Configuration
5 GND2
04642-0-005
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
Figure 5. ADuM1201 Pin Configuration
Table 12. ADuM1200 Pin Function Descriptions
Table 13. ADuM1201 Pin Function Descriptions
Pin
No.
1
Mnemonic
VDD1
Pin
No.
1
Mnemonic
VDD1
2
3
4
VIA
VIB
GND1
2
3
4
VOA
VIB
GND1
5
GND2
5
GND2
6
7
8
VOB
VOA
VDD2
6
7
8
VOB
VIA
VDD2
Function
Supply Voltage for Isolator Side 1,
2.7 V to 5.5 V.
Logic Input A.
Logic Input B.
Ground 1. Ground reference for isolator
Side 1.
Ground 2. Ground reference for isolator
Side 2.
Logic Output B.
Logic Output A.
Supply Voltage for Isolator Side 2,
2.7 V to 5.5 V.
Rev. B | Page 13 of 20
Function
Supply Voltage for Isolator Side 1,
2.7 V to 5.5 V.
Logic Output A.
Logic Input B.
Ground 1. Ground reference for Isolator
Side 1.
Ground 2. Ground reference for Isolator
Side 2.
Logic Output B.
Logic Input A.
Supply Voltage for Isolator Side 2,
2.7 V to 5.5 V.
ADuM1200/ADuM1201
TYPICAL PERFORMANCE CHARACTERISTICS
10
20
15
CURRENT (mA)
CURRENT/CHANNEL (mA)
8
6
4
5V
3V
10
5V
5
2
0
10
20
DATA RATE (Mbps)
30
0
Figure 6. Typical Input Supply Current per Channel vs. Data Rate
for 5 V and 3 V Operation
30
Figure 9. Typical ADuM1200 VDD1 Supply Current vs. Data Rate
for 5 V and 3 V Operation
4
3
3
CURRENT (mA)
4
2
5V
1
2
5V
3V
1
0
0
10
20
DATA RATE (Mbps)
30
0
0
10
20
DATA RATE (Mbps)
30
04642-0-010
3V
04642-0-007
CURRENT/CHANNEL (mA)
10
20
DATA RATE (Mbps)
0
04642-0-009
0
04642-0-006
3V
Figure 10. Typical ADuM1200 VDD2 Supply Current vs. Data Rate
for 5 V and 3 V Operation
Figure 7. Typical Output Supply Current per Channel vs. Data Rate
for 5 V and 3 V Operation (No Output Load)
10
4
CURRENT (mA)
5V
2
6
5V
4
3V
3V
1
0
0
10
20
DATA RATE (Mbps)
30
Figure 8. Typical Output Supply Current per Channel vs. Data Rate
for 5 V and 3 V Operation (15 pF Output Load)
0
0
10
20
DATA RATE (Mbps)
30
04642-0-011
2
04642-0-008
CURRENT/CHANNEL (mA)
8
3
Figure 11. Typical ADuM1201 VDD1 or VDD2 Supply Current vs. Data Rate
for 5 V and 3 V Operation
Rev. B | Page 14 of 20
ADuM1200/ADuM1201
APPLICATION INFORMATION
The ADuM120x digital isolators require no external interface
circuitry for the logic interfaces. Power supply bypassing is
strongly recommended at the input and output supply pins. The
capacitor value should be between 0.01 µF and 0.1 µF. The total
lead length between both ends of the capacitor and the input
power supply pin should not exceed 20 mm.
The pulses at the transformer output have an amplitude greater
than 1.0 V. The decoder has a sensing threshold at about 0.5 V,
therefore establishing a 0.5 V margin in which induced voltages
can be tolerated. The voltage induced across the receiving coil is
given by
V = (−dβ / dt )∑ Πrn2 ; n = 1,2,...N
PROPAGATION DELAY-RELATED PARAMETERS
where:
Propagation delay is a parameter that describes the time it takes
a logic signal to propagate through a component. The
propagation delay to a logic low output may differ from the
propagation delay to a logic high.
β is the magnetic flux density (gauss).
N is the number of turns in the receiving coil.
rn is the radius of the nth turn in the receiving coil (cm).
50%
OUTPUT (VOX)
tPHL
04642-0-012
tPLH
50%
Figure 12. Propagation Delay Parameters
Pulse-width distortion is the maximum difference between
these two propagation delay values and is an indication of how
accurately the input signal’s timing is preserved.
Channel-to-channel matching refers to the maximum amount
that the propagation delay differs between channels within a
single ADuM120x component.
Propagation delay skew refers to the maximum amount that the
propagation delay differs between multiple ADuM120x
components operating under the same conditions.
Given the geometry of the receiving coil in the ADuM120x and
an imposed requirement that the induced voltage be at most
50% of the 0.5 V margin at the decoder, a maximum allowable
magnetic field is calculated, as shown in Figure 13.
100
MAXIMUM ALLOWABLE MAGNETIC FLUX
DENSITY (kgauss)
INPUT (VIX)
The ADuM120x are extremely immune to external magnetic
fields. The limitation on the ADuM120x’s magnetic field
immunity is set by the condition in which induced voltage in
the transformer’s receiving coil is sufficiently large to either
falsely set or reset the decoder. The following analysis defines
the conditions under which this may occur. The 3 V operating
condition of the ADuM120x is examined because it represents
the most susceptible mode of operation.
1
0.1
0.01
0.001
1k
DC CORRECTNESS AND MAGNETIC FIELD IMMUNITY
Positive and negative logic transitions at the isolator input cause
narrow (~1 ns) pulses to be sent to the decoder via the
transformer. The decoder is bistable and is therefore either set
or reset by the pulses, indicating input logic transitions. In the
absence of logic transitions of more than 2 µs at the input, a
periodic set of refresh pulses indicative of the correct input state
are sent to ensure dc correctness at the output. If the decoder
receives no internal pulses for more than about 5 µs, the input
side is assumed to be unpowered or nonfunctional, in which
case the isolator output is forced to a default state (see Table 8)
by the watchdog timer circuit.
10
100k
10k
1M
10M
MAGNETIC FIELD FREQUENCY (Hz)
100M
04642-0-013
PC BOARD LAYOUT
Figure 13. Maximum Allowable External Magnetic Flux Density
For example, at a magnetic field frequency of 1 MHz, the
maximum allowable magnetic field of 0.2 kgauss induces a
voltage of 0.25 V at the receiving coil. This is about 50% of the
sensing threshold and does not cause a faulty output transition.
Similarly, if such an event were to occur during a transmitted
pulse (and had the worst-case polarity), it would reduce the
received pulse from > 1.0 V to 0.75 V—still well above the 0.5 V
sensing threshold of the decoder.
The preceding magnetic flux density values correspond to
specific current magnitudes at given distances away from the
ADuM120x transformers. Figure 14 expresses these allowable
current magnitudes as a function of frequency for selected
distances. As seen, the ADuM120x are extremely immune and
can be affected only by extremely large currents operated at
high frequency and very close to the component. For the 1 MHz
example, one would have to place a 0.5 kA current 5 mm away
from the ADuM120x to affect the component’s operation.
Rev. B | Page 15 of 20
ADuM1200/ADuM1201
POWER CONSUMPTION
DISTANCE = 1m
The supply current at a given channel of the ADuM120x
isolator is a function of the supply voltage, the channel’s data
rate, and the channel’s output load.
100
10
For each input channel, the supply current is given by
DISTANCE = 100mm
1
IDDI = IDDI (Q)
f ≤ 0.5fr
IDDI = IDDI (D) × (2f – fr) + IDDI (Q)
f > 0.5fr
DISTANCE = 5mm
0.1
for each output channel, the supply current is given by
0.01
1k
10k
100k
1M
10M
MAGNETIC FIELD FREQUENCY (Hz)
100M
04642-0-014
MAXIMUM ALLOWABLE CURRENT (kA)
1000
Figure 14. Maximum Allowable Current for Various
Current-to-ADuM120x Spacings
Note that at combinations of strong magnetic fields and high
frequencies, any loops formed by printed circuit board traces
could induce sufficiently large error voltages to trigger the
threshold of succeeding circuitry. Care should be taken in the
layout of such traces to avoid this possibility.
IDDO = IDDO (Q)
f ≤ 0.5fr
IDDO = (IDDO (D) + (0.5 × 10−3) × CLVDDO) × (2f – fr) + IDDO (Q)
f > 0.5fr
where:
IDDI (D), IDDO (D) are the input and output dynamic supply currents
per channel (mA/Mbps).
CL is the output load capacitance (pF).
VDDO is the output supply voltage (V).
f is the input logic signal frequency (MHz, half of the input data
rate, NRZ signaling).
fr is the input stage refresh rate (Mbps).
IDDI (Q), IDDO (Q) are the specified input and output quiescent
supply currents (mA).
To calculate the total IDD1 and IDD2 supply current, the supply
currents for each input and output channel corresponding to
IDD1 and IDD2 are calculated and totaled. Figure 6 and Figure 7
provide per-channel supply currents as a function of data rate
for an unloaded output condition. Figure 8 provides perchannel supply current as a function of data rate for a 15 pF
output condition. Figure 9 through Figure 11 provide total IDD1
and IDD2 supply current as a function of data rate for
ADuM1200 and ADuM1201 channel configurations.
Rev. B | Page 16 of 20
ADuM1200/ADuM1201
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
8
5
4.00 (0.1574)
3.80 (0.1497) 1
4
6.20 (0.2440)
5.80 (0.2284)
1.27 (0.0500)
BSC
0.25 (0.0098)
0.10 (0.0040)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
COPLANARITY
SEATING 0.31 (0.0122)
0.10
PLANE
0.50 (0.0196)
× 45°
0.25 (0.0099)
8°
0.25 (0.0098) 0° 1.27 (0.0500)
0.40 (0.0157)
0.17 (0.0067)
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 15. 8-Lead Standard Small Outline Package [SOIC]
Narrow Body (R-8)
Dimensions shown in millimeters (inches)
ORDERING GUIDE
Model
ADuM1200AR
ADuM1200AR-RL7
ADuM1200ARZ2
ADuM1200ARZ-RL72
ADuM1200BR
ADuM1200BR-RL7
ADuM1200BRZ2
ADuM1200BRZ-RL72
ADuM1200CR
ADuM1200CR-RL7
ADuM1200CRZ2
ADuM1200CRZ-RL72
ADuM1201AR
ADuM1201AR-RL7
ADuM1201ARZ2
ADuM1201ARZ-RL72
ADuM1201BR
ADuM1201BR-RL7
ADuM1201BRZ2
ADuM1201BRZ-RL72
ADuM1201CR
ADuM1201CR-RL7
ADuM1201CRZ2
ADuM1201CRZ-RL72
1
2
Number
of Inputs,
VDD1 Side
2
2
2
2
2
2
2
2
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
1
Number
of Inputs,
VDD2 Side
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Data Rate
(Mbps)
1
1
1
1
10
10
10
10
25
25
25
25
1
1
1
1
10
10
10
10
25
25
25
25
Maximum
Propagation
Delay, 5 V (ns)
100
100
100
100
50
50
50
50
45
45
45
45
100
100
100
100
50
50
50
50
45
45
45
45
R-8 = 8-lead narrow body SOIC.
Z = Pb-free part.
Rev. B | Page 17 of 20
Maximum
Pulse-Width
Distortion
(ns)
40
40
40
40
3
3
3
3
3
3
3
3
40
40
40
40
3
3
3
3
3
3
3
3
Temperature
Range (°C)
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
−40 to +105
Package
Option1
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
R-8
ADuM1200/ADuM1201
NOTES
Rev. B | Page 18 of 20
ADuM1200/ADuM1201
NOTES
Rev. B | Page 19 of 20
ADuM1200/ADuM1201
NOTES
© 2004 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D04642–0–9/04(B)
Rev. B | Page 20 of 20
Similar pages