FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Features tm Applications ■ Applicable to Pb-free IR reflow soldering ■ Power supply regulators ■ Compact 4-pin package ■ Digital logic inputs ■ High current transfer ratio: 600% minimum ■ Microprocessor inputs ■ C-UL, UL, and VDE approved Description ■ High input-output isolation voltage of 5000Vrms ■ Higher operating temperature (versus H11B815) The FOD815 consists of a gallium arsenide infrared emitting diode, driving a silicon photodarlington output in a 4-pin dual in-line package. Functional Block Diagram ANODE 1 4 COLLECTOR 4 CATHODE 2 3 EMITTER 1 Absolute Maximum Ratings (TA = 25°C Unless otherwise specified.) Symbol Parameter Value Units -55 to +125 °C TOTAL DEVICE TSTG Storage Temperature TOPR Operating Temperature TSOL Lead Solder Temperature PTOT -30 to +105 °C 260 for 10 sec °C Total Power Dissipation 200 mW IF Forward Current 50 mA P Power Dissipation 70 mW VCEO Collector-Emitter Voltage 35 V VECO INPUT OUTPUT Emitter-Collector Voltage 6 V IC Collector Current 80 mA PC Collector Power Dissipation 150 mW ©2006 Fairchild Semiconductor Corporation FOD815 Series Rev. 1.0.4 1 www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler May 2006 Individual Component Characteristics Symbol Parameter Test Conditions Min. Typ. Max. Unit INPUT VF Forward Voltage IF = 20mA – 1.2 1.4 V Ct Terminal Capacitance V = 0, f = 1kHz – 50 250 pF Collector Dark Current VCE = 10V, IF = 0 – – 1 µA OUTPUT ICEO BVCEO Collector-Emitter Breakdown Voltage IC = 0.1mA, IF = 0 35 – – V BVECO Emitter-Collector Breakdown Voltage IE = 10µA, IF = 0 6 – – V Min. Typ. Max. Unit Transfer Characteristics (TA = 25°C Unless otherwise specified.) Symbol DC Characteristic IC CTR Collector Current Test Conditions IF = 1mA, VCE = 2V Current Transfer Ratio(1) 6 – 75 mA 600 – 7,500 % – 0.8 1 V Collector-Emitter Saturation Voltage IF = 20mA, IC = 5mA fC Cut-Off Frequency VCE = 5V, IC = 2mA, RL = 100Ω, -3dB 1 6 – KHz tr Response Time (Rise) VCE = 2 V, IC = 10mA, RL = 100Ω – 60 300 µs tf Response Time (Fall) – 53 250 µs VCE(sat) Isolation Characteristics Symbol Test Conditions Min. Typ. Max. Units VISO Input-Output Isolation Voltage Characteristic f = 60Hz, t = 1 min, II-O ≤ 2µA 5000 – – Vac(rms) Riso Isolation Resistance DC500V 40~60% R.H. 5x1010 1x1011 – Ω Cf Floating Capacitance V = 0, f = 1MHz – 0.6 1 pF Note: 1. Current Transfer Ratio (CTR) = IC/IF x 100%. 2 FOD815 Series Rev. 1.0.4 www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Electrical Characteristics (TA = 25°C Unless otherwise specified.) COLLECTOR POWER DISSIPATION PC (mW) Fig. 1 Forward Current vs. Ambient Temperature FORWARD CURRENT IF (mA) 60 50 40 30 20 10 0 -30 0 25 50 75 150 100 50 0 -30 0 25 50 75 100 125 AMBIENT TEMPERATURE TA (°C) Fig. 4 Forward Current vs. Forward Voltage 8 Ta = 25°C FORWARD CURRENT IF (mA) 50mA 5mA 7mA 7 30mA 500 1mA 3mA 6 5 4 Ic = 0.5mA COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) 200 100 125 AMBIENT TEMPERATURE TA (°C) Fig. 3 Collector-Emitted Saturation Voltage vs. Forward Current 3 2 1 Ta = 75°C 50°C 200 25°C 0°C - 25°C 100 50 20 10 5 2 0 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 FORWARD CURRENT IF (mA) 2000 0 0.5 1.0 1.5 2.0 Fig. 5 Current Transfer Ratio vs. Forward Current 100 Ta = 25°C 1600 1200 800 400 0.2 0.5 1 2 5 Ta = 25°C 80 IF = 10 mA Pc(MAX.) 60 5mA 40 2mA 1mA 20 0 0 10 FORWARD CURRENT IF (mA) 1 2 3 4 5 COLLECTOR-EMITTER VOLTAGE VCE (V) 3 FOD815 Series Rev. 1.0.4 3.0 Fig. 6 Collector Current vs. Collector-Emitter Voltage VCE = 2V 0 0.1 2.5 FORWARD VOLTAGE VF (V) COLLECTOR CURRENT IC (mA) CURRENT TRANSFER RATIO CTR ( %) Fig. 2 Collector Power Dissipation vs. Ambient Temperature www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Typical Electrical/Optical Characteristic Curves (TA = 25°C Unless otherwise specified.) Fig. 8 Collector-Emitter Saturation Voltage vs. Ambient Temperature Fig. 7. Relative Current Transfer Ratio vs. Ambient Temperature IF = 5mA VCE = 2V 100 50 0 -30 IF = 20mA IC = 5mA 1.0 0.8 0.6 0.4 0.2 0 -25 0 25 50 75 100 AMBIENT TEMPERATURE TA (°C) 0 25 50 75 100 AMBIENT TEMPERATURE TA (°C) Fig. 9 Collector Dark Current vs. Ambient Temperature Fig. 10. Response Time vs. Load Resistance 10-5 500 VCE = 2V 200 IC = 10mA VCE = 20V 10-6 RESPONSE TIME (µs) COLLECTOR DARK CURRENT ICEO (A) COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) (V) RELATIVE CURRENT TRANSFER RATIO (%) 150 10-7 10-8 10-9 10-10 tr Ta = 25°C 100 tf 50 20 td 10 5 ts 2 1 0.5 10-11 -25 VCE = 2V IC = 2mA Ta = 25°C 0 0.1 0.2 0.5 1 2 5 10 LOAD RESISTANCE RL (kΩ) Test Circuit for Response Time Fig. 11. Frequency Response VOLTAGE GAIN AV (dB) 0.2 0.05 0 25 50 75 100 AMBIENT TEMPERATURE TA (°C) Vcc Input RD Input Output RL 10% Output 90% ts td -10 RL=10kΩ 1kΩ tr 100Ω tf Test Circuit for Frequency Response Vcc -20 0.02 0.1 1 10 100 RD FREQUENCY f (kHz) 4 FOD815 Series Rev. 1.0.4 RL Output www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Typical Electrical/Optical Characteristic Curves (TA = 25°C Unless otherwise specified.) 0.276 (7.00) 0.236 (6.00) 0.200 (5.10) 0.161 (4.10) 0.312 (7.92) 0.288 (7.32) 0.200 (5.10) 0.161 (4.10) SEATING PLANE SEATING PLANE 0.312 (7.92) 0.288 (7.32) 0.157 (4.00) 0.118 (3.00) 0.276 (7.00) 0.236 (6.00) 0.157 (4.00) 0.118 (3.00) 0.010 (0.26) 0.130 (3.30) 0.091 (2.30) 0.051 (1.30) 0.043 (1.10) 0.020 (0.51) TYP 0.049 (1.25) 0.030 (0.76) 0.024 (0.60) 0.004 (0.10) 0.412 (10.46) 0.388 (9.86) 0.010 (0.26) 0.150 (3.80) 0.110 (2.80) 0.110 (2.79) 0.090 (2.29) 0.300 (7.62) typ Lead Coplanarity 0.004 (0.10) MAX 0.024 (0.60) 0.016 (0.40) 0.110 (2.79) 0.090 (2.29) Footprint Dimensions (Surface Mount)) SEATING PLANE Package Dimensions (0.4" Lead Spacing) 0.200 (5.10) 0.161 (4.10) 1.5 1.3 0.312 (7.92) 0.288 (7.32) 0.157 (4.00) 0.118 (3.00) 0.276 (7.00) 0.236 (6.00) 9 0.291 (7.40) 0.252 (6.40) 0.130 (3.30) 0.091 (2.30) 0.110 (2.80) 0.011 (1.80) 0.150 (3.80) 0.110 (2.80) 0.024 (0.60) 0.016 (0.40) 2.54 0.010 (0.26) 0.110 (2.79) 0.090 (2.29) 0.42 (10.66) 0.38 (9.66) Note: All dimensions are in inches (millimeters) 5 FOD815 Series Rev. 1.0.4 www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Package Dimensions (Surface Mount) Package Dimensions (Through Hole) Option Order Entry Identifier Description S .S Surface Mount Lead Bend SD .SD Surface Mount; Tape and reel W .W 0.4" Lead Spacing 300 .300 VDE Approved 300W .300W VDE Approved, 0.4" Lead Spacing 3S .3S VDE Approved, Surface Mount 3SD .3SD VDE Approved, Surface Mount, Tape & Reel Marking Information 4 5 V X ZZ Y 3 815 6 2 1 Definitions 1 Fairchild logo 2 Device number 3 VDE mark (Note: Only appears on parts ordered with VDE option – See order entry table) 4 One digit year code 5 Two digit work week ranging from ‘01’ to ‘53’ 6 Assembly package code 6 FOD815 Series Rev. 1.0.4 www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Ordering Information P2 Ø1.55±0.05 P0 1.75±0.1 F W B0 A0 P1 0.3±0.05 K0 Note: All dimensions are in millimeters. Description Symbol Dimensions in mm (inches) Tape wide W 16 ± 0.3 (.63) Pitch of sprocket holes P0 4 ± 0.1 (.15) Distance of compartment F P2 7.5 ± 0.1 (.295) 2 ± 0.1 (.079) Distance of compartment to compartment P1 12 ± 0.1 (.472) Compartment A0 10.45 ± 0.1 (.411) B0 5.30 ± 0.1 (.209) K0 4.25 ± 0.1 (.167) 7 FOD815 Series Rev. 1.0.4 www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Carrier Tape Specifications Temperature (°C) Tp Tsmax Ramp-down Tsmin 25°C Soldering zon ts (Preheat) Time (sec) Profile Feature Pb-Sn solder assembly Lead Free assembly Preheat condition (Tsmin-Tsmax / ts) 100°C ~ 150°C 60 ~ 120 sec 150°C ~ 200°C 60 ~120 sec Melt soldering zone 183°C 60 ~ 120 sec 217°C 30 ~ 90 sec Peak temperature (Tp) 240 +0/-5°C 260 +0/-5°C Ramp-down rate 6°C/sec max. 6°C/sec max. Recommended Wave Soldering condition Profile Feature For all solder assembly Peak temperature (Tp) Max 260°C for 10 sec 8 FOD815 Series Rev. 1.0.4 www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler Lead Free Recommended IR Reflow Condition The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® FASTr™ ActiveArray™ FPS™ Bottomless™ FRFET™ Build it Now™ GlobalOptoisolator™ CoolFET™ GTO™ CROSSVOLT™ HiSeC™ DOME™ I2C™ EcoSPARK™ i-Lo™ E2CMOS™ ImpliedDisconnect™ EnSigna™ IntelliMAX™ FACT™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I19 9 FOD815 Series Rev. 1.0.4 www.fairchildsemi.com FOD815 Series 4-Pin High Operating Temperature Photodarlington Optocoupler TRADEMARKS