ERGO-NAV EGN-D Series Analog Navigation Disc Features/Benefits • Omni-directional analog control • Variable speed (rate and control) • Low profile • Low power (instant wake-up) • Intergrated switch (center click) • Force/deflection device • Simple electrical interface • Environmental protection • Long life ! NEW Typical Applications • Cell phones • Gaming devices • MP3 players • PDA’s • GPS devices • Remote controls • Laptops • Convergent devices • Others Electrical Mechanical Interface/Output POINTING MODES: Realtive or Absolute ANGULAR DIRECTIONS: 360º ANGULAR RESOLUTION (deg): 1.8º (8 bit) RATE STEPS: 32 SNAP TO AXIS: Optional POSITION SAMPLING RATE: 25-40hz REPEATABILITY: ±2% How To Order EGN-DO for 360º omni-direction wth Z switch U for 360º omni-direction wthout Z switch V ffor N-way (N=1,2,4 axis) wth Z switch W for N-way (N=1,2,4 axis) wthout Z switch A adhesive-mount B process intergration 0 without dedicated PCB 1 with dedicated PCB 1 for 20mm actuator diameter C for custom intergration* 0 without dedicated microcontroller chip 1 with dedicated microcontroller chip *Custom Integration - ErgoNav EGN-D Series can be customized per the design rules and limitations: -Nav-disc diameter and actuator height (scalable per the design rules) -Nav-disc actuator (plastic or silicone; color, surface texture, fashion; process Integration) _Nav-disc plastic retainer (integratable to device chassis per the design rules) _Nav-disc silicone sensor pill and pad (process integratable to device membrane elements per the design rules) -Dedicated microcontroller (contains firmware for quick I/O interface, or firmware compiled into device controller) Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–17 www.ittcannon.com C Navigation TRANSDUCER RESISTANCE: 600 Ω ± 200 Ω OUT OF CONTACT RESISTANCE: >10M Ω REFERENCE RESISTOR VALUE (R): 1,500 Ω ± 5% DOME SWITCH RESISTANCE: Open>500k Ω Closed<250 Ω POWERING VOLTAGES: ≤8 - 12 Vdc # OF A/D INPUTS REQUIRED: One 8 bit ADC # OF GPIO INTERFACE NEEDED: 4 CONTINOUS USE CURRENT PEAK TYPICAL/WORST CASE: 1.1mA/1.7 mA CONTINOUS USE CURRENT AVERAGE TYPICAL/WORST CASE: 22µA/34µA SLEEP POWER CONSUMPTION: 0µW OVERALL HEIGHT (mm): < 2 ACTUATOR DIAMETER (mm): 20 NOMINAL PCB AREA REQUIRED (cir. mm2): 615 NOMINAL DEFLECTION TO FIRST CONTACT (mm): 0.25 MAX. DEFLECTION (mm): <0.75 MIN. FORCE TO FIRST CONTACT (g force): < 30 MAX. OPERATIONAL FORCE (g force): 1000 DOME SWITCH ACTUATION FORCE (g force): 300 typ. ERGO-NAV EGN-D Series Analog Navigation Disc RELIABILITY Operating life Contamination/Ingress protection LIFE CYCLING: >3,000,000 ACCELERATED USE CYCLING: >28,000 DOME SWWITCH OPERATING LIFE, (cycles): >500,000 DUST PROTECTION: IP5XX CONTAMINATION RESISTANCE: HUMAN SKIN OILS, HAND CREAM: no effect ROBUST CONTAMINANT RESISTANCE; WATER, SUGAR WATER, SALT WATER, COFFEEE, COLA, GASOLINE: IPX4X EMI/EMC/RFI: N/A ESD RATING: Pass Mechanical Stress MAXIMUM SINGLE VERTICAL FORCE (grams) : >5,000 MAXIMUM REPEAT VERTICAL FORCE (grams): >2,000 VIBRATION: Pass DROP TEST: IPXX5 Environmental OPERATING TEMP (deg C) : -10 to 55 STORAGE TEMP (deg C): -40 to 85 SHIPPING ALTITUDE (feet/m): 40,000/12,200 OPERATING HUMIDITY (%RH): 5<>98 Specific test reference / method is available upon request 11 10 7 4.10 0 Navigation C Center Click Actuator Dome Switch 1.80 0.30 0 Key Mat / Bellows Transducer PCB 0 0 25 ) . W - 0 H (T T 52 ID 0.1 E W AC TR 5.1 5 TG (typ) q A 1.15 q X8 45˚ REFRENCE TRACES 42 Reference Only 0 6.3 .00 ø 14 CLE CIR PILL TG (typical) ø REFRENCE TRACES SYMMETRY OF TRACES IS CRITICAL ø 0 .76 38 Reference Only TR 0.1 AC 52 0 E GA - 0 P ( .02 TG 5 ) ø Note: Trace pattern must retain a flatness to within 0.10 mm across the span of the pill circle. See included FEA for more information. Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–18 www.ittcannon.com