GS40 40W AC-DC Single Output Desktop series Features : Universal AC input / Full range No load power consumption<0.3W Pass energy star (CEC) level for full series Meet energy star (CEC) level for full series Meet EISA 2007(Energy Independence and Security Act) 3 pole AC inlet IEC320-C14 Class power ( with earth pin) Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case LED indicator for power on Approvals: UL / CUL / TUV / BSMI / CCC / CB / FCC / CE Pass LPS for full series 2 years warranty TUV Rheinland Product Safety SPECIFICATION ORDER NO. GS40A05-P1J GS40A07-P1J GS40A09-P1J GS40A12-P1J GS40A15-P1J GS40A18-P1J GS40A24-P1J GS40A48-P1J SAFETY MODEL NO. DC VOLTAGE OUTPUT GS40A05 Note.2 5V GS40A07 GS40A09 GS40A12 GS40A15 GS40A18 GS40A24 GS40A48 7.5V 9V 12V 15V 18V 24V 48V RATED CURRENT 5A 5.34A 4.45A 3.34A 2.67A 2.22A 1.67A 0.84A CURRENT RANGE 0 ~ 5A 0 ~ 5.34A 0 ~ 4.45A 0 ~ 3.34A 0 ~ 2.67A 0 ~ 2.22A 0 ~ 1.67A 0 ~ 0.84A RATED POWER (max.) 25W 40W 40W 40W 40W 40W 40W 40W 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 100mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.5% 2.5% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.5% 2.5% Note.5 LOAD REGULATION SETUP, RISE TIME INPUT geprUfre Sicherheit Note.7 600ms, 30ms / 230VAC 600ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE 50ms / 230VAC 15ms / 115VAC at full load 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80.5% AC CURRENT INRUSH CURRENT (max.) 1A / 115VAC LEAKAGE CURRENT(max.) OVERLOAD PROTECTION OVER VOLTAGE 85.5% 85% 90% 91% 92% 25.2 ~ 32.4V 50.4 ~ 64.8V 0.75mA / 240VAC 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.25 ~ 6.75V 7.88 ~ 10.13V 9.45 ~ 12.15V 12.6 ~ 16.2V 15.75 ~ 20.25V 18.9 ~ 24.3V Protection type : Shut down o/p voltage, re-power on to recover 0 ~ +60 WORKING HUMIDITY 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH SAFETY STANDARDS WITHSTAND VOLTAGE 89.5% 65A / 230VAC WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 89% 0.5A / 230VAC (Refer to output load derating curve) 0.03% / (0~50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 class B, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254 class B (Note. 6) HARMONIC CURRENT Compliance to EN61000-3-2,3, GB17625.1 OTHERS CONNECTOR NOTE EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A MTBF DIMENSION 711Khrs min. MIL-HDBK-217F(25 ) 125*50*31.5mm (L*W*H) 0.31Kg; 40pcs/13.4Kg/0.91CUFT PACKING PLUG Standard type P1J: 2.1 CABLE See page 2 ; Other type available by customer requested * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested 1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2. DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. File Name:GS40-SPEC 2008-10-22 GS40 40W AC-DC Single Output Desktop Mechanical Specification Case No. 974A 125 31.5 series Unit:mm UL1185 16AWG 1000 50mm for 5 ~ 15V UL1185 18AWG 1800 50mm for 18 ~ 48V 70 10mm 50 C"+" 11 0.5mm ID 2.1 x OD 5.5 Plug Assignment Standard plug: P1J (option) P1J Derating Curve P/N OUTPUT CENTER + Static Characteristics Ta=25 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 0 10 20 30 40 50 60 AMBIENT TEMPERATURE ( ) 70 (HORIZONTAL) 60 50 40 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS40-SPEC 2008-10-22