8 5 6 7 4 NOTES: D 2 3 ECN # 1. MOUNTING: Panel mounting hole .171" (4.34mm) Diameter Litepipe from .200" to .500" use grommet retainer RTN 150 Litepipe from .500" to 2.00" the spring retainer RTN 250 is recommended for rigidity 2. Standoff used to adjust the height of a standard LED above the PCB to maintain a maximum .050" clearance between Litepipe and LED. 3. U.S.& Foreign Pat Issued & Pend. 1 REVISIONS REV DESCRIPTION N/A INITIAL RELEASE 1 UPDATE DWG FORMAT 2 REVISE .170" DIMENSION TOLERANCES 001 REVISED PER ECR111009AZ01 DATE INITIALS 8/25/98 JS 12/15/08 JG 3/11/09 AZ 4/23/10 KH D RETAINERS (ORDER SEPERATELY) .190 (4.826mm) C A RTN 150 C A +.001 .170 - .005 (4.318mm) RTN 250 B B .030 (.762mm) XXX ORDERING CODE: LPC XXX CTP SECTION A-A LENGTH CODE (Min 020=.200" / Max 200=2.000") A 020 022 024 026 028 030 032 034 036 038 040 042 044 046 048 050 052 054 056 058 060 062 064 066 068 070 072 074 076 078 080 082 084 086 088 090 092 094 096 098 100 102 105 107 110 112 115 117 120 122 125 127 130 132 135 137 140 142 145 147 150 152 155 157 160 162 165 167 170 172 175 177 180 182 185 187 190 192 195 197 200 COLOR CTP CLEAR UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: ANGLES 1' FINISH DECIMALS .X .020 .010 .XX .XXX .005 BREAK ALL CORNERS AND SHARP EDGES .030 MAX FINISH 190 Bosstick Boulevard, Suite101 San Marcos, CA 92069 USA Phone (760) 560-1300 Fax (760) 560-1301 email [email protected] TITLE: CLIPLITE 4MM LITEPIPE VERTICAL SEE NOTES DATE THIRD ANGLE PROJECTION PROPRIETARY AND CONFIDENTIAL 7 VISUAL COMMUNICATIONS COMPANY, INC. ACRYLIC (OPTICAL GRADE) UL 94-HB APPROVAL SPECIAL LENGTHS UPON REQUESTS 8 MATERIAL THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF VISUAL COMMUNICATIONS COMPANY, INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF VISUAL COMMUNICATIONS COMPANY, INC IS PROHIBITED. 6 5 4 3 DRAWN K.Howard 4/23/10 CHECKED DPZ 5/4/10 SIZE SCALE: 8:1 DO NOT SCALE DRAWING 2 REV DWG. NO. B LPC XXX_A 001 SHEET 1 OF 1 1 A