AKF-15 SERIES AC/DC Power Module 15W FEATURES ►Fully encapsulated Plastic Case ►Single-, Dual- and Triple Output Models ►3 Mounting Versions: - PCB Mounting with Solder Pins - Chassis Mounting with Screw Terminals - DIN-Rail Mounting ►Universal Input 85-264 VAC, 47- 440 Hz ►Protection Class ll ►Safety Approval to cUL/UL/IEC/EN 60950-1 ►UL508 Approval (Option) ►Over Load and Over Voltage Protection ►3 Year Product Warranty PRODUCT OVERVIEW The MINMAX AKF-15 series is a new range of fully encapsulated AC/DC power supply modules.The product features EMI-filter to EN55022, class B and EMS compliance to EN 61000-4 standard. Universal input voltage 85-264VAC and International safety approvals qualifies these power modules for applications in products with worldwide markets. For industrial applications, the models for chassis mounting can also be supplied as option with UL508 approval.The AKF-15 series provide a cost effective solution for many space critical applications in commercial and industrial electronic equipment. Model Selection Guide Model Number PCB Mounting Output (For model with Chassis Voltage Output Current Input Current 115VAC, 60Hz @Max. Load @No Load mA(typ.) mA(typ.) Max. capacitive Efficiency Load μF (typ.) @Max. Load % VDC Max. mA AKF-15S05 5 3000 290 30 3900 75 AKF-15S12 12 1250 275 30 2200 79 AKF-15S15 15 1000 275 30 2200 79 AKF-15S24 24 625 275 30 1000 79 AKF-15S48 48 310 273 30 680 79 AKF-15D12 ±12 ±650 275 30 #1500 79 AKF-15D15 ±15 ±500 275 30 #1500 79 302 30 290 30 284 30 Mounting, add suffix C) AKF-15D512 AKF-15T512 AKF-15T515 5 1500 *12 625 5 2000 *12 200 *-12 -200 *5 2000 *15 150 *-15 -150 * Output voltage accuracy 4% max. 2000 1500 2200 1500 1500 2200 1500 1500 # For each output 72 74 74 Input Specifications Parameter Input Voltage Range Input Frequency Range Input Voltage Range Model All Models 115VAC 230VAC Inrush Current (Cold Start at 25℃) E-mail:[email protected] 2012/11/14 REV:19 Tel:886-6-2923150 Page 1 of 5 Min. 85 47 120 ----- Typ. ----------- Max. 264 440 370 15 30 Unit VAC Hz VDC A A AKF-15 SERIES AC/DC POWER MODULE 15W Output Specifications Conditions Parameter Output Voltage Accuracy Line Regulation Iout=Min. to Max. Load Regulation Vo1 Vo2 Vo3 Cross RegulationDual Positives / Triple Output Vin=Min. to Max. Single Output Models Dual/ Triple Output Models Measured output Io = 20% to 100% of rated load Other output(s) set at 50% of rated load 5VDC Output Models Other Output Models Ripple & Noise (20MHz) Minimum Load Over Voltage Protection Temperature Coefficient Overshoot Zener diode clamp Min. --------------------------- Foldback, auto-recovery 105 (long term overload condition may cause damage) Hiccup mode, indefinite (automatic recovery) Current Limitation Short Circuit Protection Typ. ±1.0 ±0.5 ±0.5 ±2.5 ±1.0 ±2.5 ±2.5 1.5 0.8 10 120 ±0.01 --- Max. ±2.0 ±1.0 ±1.0 ±5.0 ------1.8 1.0 ----±0.02 5 Unit % % % % % % % %VPP of Vo %VPP of Vo %Inom. % of Vo %/℃ % Vout --- --- %Inom. General Specifications Conditions Input to Output, 60 Seconds 500 VDC Parameter I/O Isolation Voltage I/O Isolation Resistance Switching Frequency Hold-up Time MTBF (calculated) EMC Emission MIL-HDBK-217F@25℃, Ground Benign Conducted and radiated Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EMC Immunity according EN61000-6-1 EN61000-4-6 EN61000-4-8 EN61000-4-11 Protection Class II Safety Approvals Min. Typ. Max. Unit 3000 ----VACrms 100 ----MΩ --100 --KHz --20 --ms 280,000 ----Hours EN 55011 class B, EN 55022 class B, FCC part 15 class B Specification Requirement Performance Criteria B Air ±8KV Cont. ±4KV A 80~1000MHz, 10V/m 80% AM, 1KHz modulation B AC port ±2KV DC, SL, TL ±2KV not less than 1 min. B 1.2/50uS(8/20uS) AC dif. ±1KV DC ±0.5KV 0.15~80MHz, 10Vrms (functional earth ports included) B 80% AM, 1KHz modulation A 50Hz/60Hz, 30A/m B 30%, 10ms C 60%, 100ms, 95%, 5000ms According IEC/EN 60536 cUL/UL 60950-1,IEC/EN 60950-1 (UL508 for models with order code suffix ICE only) Input Fuse All Models 2A / 250VAC 1.5A Slow – Blow Type Built-in Fuse External Fuse (Recommended) Environmental Specifications Parameter Temperature Range (operational) Power Derating Storage Temperature Range Over Temperature Protection Cooling Humidity (non condensing) E-mail:[email protected] 2012/11/14 REV:19 Ambient +50℃ to +70℃ Conditions -25℃ -40℃ at 90℃ (automatic recovery at 67℃) Free-Air convection --- Tel:886-6-2923150 Page 2 of 5 +70℃ 0.563W / ℃ +85℃ 95 % rel. H AKF-15 SERIES AC/DC POWER MODULE 15W Notes 1 All Specifications typical at Ta=+25℃, resistive load, 115VAC, 60Hz input voltage and after warm-up time rated output current unless otherwise noted. 2 Ripple & Noise measurement bandwidth is 0~20 MHz 3 These power modules require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage the power 4 Other input and output voltage may be available, please contact factory. 5 To order the module with chassis mount package, please add a suffix C (e.g. AKF-15S05C). supplies however they may not meet all listed specifications. 6 To order the module with UL508 safety, please add a suffix ICE (e.g. AKF-15S05ICE). 7 Part number for DIN-Rail mounting bracket: AC-DIN-01 8 Specifications are subject to change without notice Package Specifications PCB Mounting Mechanical Dimensions Pin Connections 6.0 [0.24] 8.89 [0.35] 8.89 [0.35] 11.43 [0.45] 11.43 [0.45] 19.5 [0.77] Pin Single 0.7 [0.03] Dual (D12,D15) 1 3 [0.28] 7.1 [0.28] 2 4 -Vout -Vout -Vout2 Common 5 No Pin Common +Vout2 +Vout2 6 +Vout +Vout -Vout1 -Vout1 +Vout1 +Vout1 1 7 ►All 20.32 [0.80] No Pin dimensions in mm (inches) ►Tolerance: ±0.5 54.0 [2.13] ►Pin Physical Characteristics Case Size : Case Material : Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 174g 74.0x54.0x19.5mm (2.91x2.13x0.77 inches) E-mail:[email protected] 2012/11/14 REV:19 No Pin 5.0 [0.20] 46.0 [1.81] Bottom View 3 74.0 [2.91] 39.8 [1.57] 7.1 62.0 [2.44] Mounting M4.0 Thread AC(L) – AC Line 0.04] 4 1.0 [ 5 6 Tel:886-6-2923150 Page 3 of 5 Triple AC(N) – AC Neutral 2 7 Dual (D512) (±0.02) diameter 1.0 ±0.1 (0.04±0.004) -Vout3 AKF-15 SERIES AC/DC POWER MODULE 15W Package Specifications Chassis Mounting (order code suffix C) Mechanical Dimensions Connections 3.5 7 6 5 4 3 Indication LED 2 Top view 1 54.0 [2.13] Terminal 46.0 [1.81] 4x 23.3 [0.92] 5.0 [0.20] 16.8 [0.66] : Case Material : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : 162g Package Specifications with DIN Rail Mounting Bracket (order code AC-DIN-01) Mechanical Dimensions 2 1 54.0 [2.13] Indication LED 46.0 [1.81] 3.5 Top view POWER"GOOD"INDICATOR 86.0 [3.39] 96.0 [3.78] 23.3 [0.92] 11.0 [0.43] 3.0 [0.12] 5.0 [0.20] 10.0 [0.39] 16.8 [0.66] 76.0 [2.99] Physical Characteristics Case Size : Case Material : 96.0x54.0x23.3mm (3.78x2.13x0.92 inches) Plastic resin + Fiberglass (flammability to UL 94V-0 rated) Weight : 216g E-mail:[email protected] 2012/11/14 REV:19 Tel:886-6-2923150 Page 4 of 5 NC Triple -Vout3 -Vout -Vout -Vout2 Common 5 NC Common +Vout2 +Vout2 6 +Vout +Vout -Vout1 -Vout1 +Vout1 +Vout1 NC NC: No Connection 10.0 [0.39] Case Size 7 6 5 4 3 AC(L) – AC Line 7 Physical Characteristics 4x AC(N) – AC Neutral 2 4 86.0 [3.39] 96.0 [3.78] Dual (D512) 1 3 POWER"GOOD"INDICATOR 76.0 [2.99] Dual (D12,D15) Single ►All dimensions in mm (inches) ►Tolerance: X.X±0.5 (X.XX±0.02) X.XX±0.25 ( X.XXX±0.01) ►Pin pitch tolerance: ±0.25 (0.01) AKF-15 SERIES AC/DC POWER MODULE 15W, Single, Dual & Triple Output DIN-Rail Mounting Kit Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 702, Taiwan Tel: 886-6-2923150 Fax: 886-6-2923149 E-mail: [email protected] 2012/11/14 REV:19 Page 5 of 5