MKC 1860 Not for new designs Vishay Roederstein Metallized Polycarbonate Film Capacitor Related Document: IEC 60384-6 FEATURES Dimensions in millimeters Product is completely lead (Pb)-free. Product is RoHS compliant. Ød RATED VOLTAGES (UR) e3 63 VDC, 100 VDC, 250 VDC, 400 VDC 40.0 ± 5.0 L Max. D Max. 40.0 ± 5.0 PERMISSIBLE AC VOLTAGES (RMS) UP TO 60HZ RoHS COMPLIANT 40 VAC, 63 VAC, 160 VAC, 200 VAC D ØD ≤ 7.0 0.7 < 16.0 0.8 ≥ 16.5 1.0 MAIN APPLICATIONS Storage, filter, timing and integrating circuits. MARKING Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture DIELECTRIC Polycarbonate film ELECTRODES Vacuum deposited aluminum TEST VOLTAGE (ELECTRODE/ELECTRODE) 1.6 x UR for 2 s INSULATION RESISTANCE Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For C ≤ 0.33µF and UR > 100 VDC: 30,000 MΩ minimum value (100,000 MΩ typical value) For C ≤ 0.33µF and UR ≤ 100 VDC: 15,000 MΩ minimum value (50,000 MΩ typical value) TIME CONSTANT Measured at 100 VDC (63 VDC series measured at 50 VDC) after one minute For C > 0.33µF and UR > 100 VDC: 10,000 s minimum value (40,000 s typical value) For C > 0.33µF and UR ≤ 100 VDC: 5,000 s minimum value (15,000 s typical value) CAPACITANCE DRIFT COATING Up to + 40°C, ± 2% for a period of two years Plastic-wrapping, epoxy resin sealed DERATING FOR DC AND AC. CATEGORY VOLTAGE UC CONSTRUCTION Extended metallized film (refer to general information) At + 85°C: UC = 1.0 UR At + 100°C: UC = 0.8 UR LEADS SELF INDUCTANCE Tinned wire ~ 12 nH measured with 6mm long leads IEC TEST CLASSIFICATION PULL TEST ON LEADS OPERATING TEMPERATURE RANGE BEND TEST ON LEADS ≥ 20 N in direction of leads according to IEC 60068-2-21 55/100/21, according to IEC 60068 - 55°C to + 100°C 2 bends through 90° with half of the force used in pull test CAPACITANCE RANGE RELIABILITY 0.01µF to 10µF Operational life > 300,000 h Failure rate < 1 FIT (40°C and 0.5 x UR) CAPACITANCE TOLERANCES For further details, please refer to the general information available at www.vishay.com/doc?26033. ± 10% (K), ± 5% (J) MAXIMUM PULSE RISE TIME CAPACITOR LENGTH (mm) 14 19 26.5 31.5 63 VDC 17 9 6 5 Maximum Pulse Rise Time dv/dt [V/µs] 100 VDC 250 VDC 23 38 13 21 8 13 6 10 400 VDC 61 33 20 16 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. Document Number: 26028 Revision: 05-Jul-05 For technical questions contact; [email protected] www.vishay.com 1 MKC 1860 Vishay Roederstein Metallized Polycarbonate Film Capacitor Related Document: IEC 60384-6 DISSIPATION FACTOR TAN δ C ≤ 0.1µF 0.1µF < C ≤ 1.0µF C > 1.0µF 1kHz 3 x 10-3 3 x 10-3 3 x 10-3 10kHz 4 x 10-3 4 x 10-3 — 100kHz 10 x 10-3 — — MEASURED AT Maximum values CAPACITANCE CAPACITANCE CODE D L D L D L D L 0.01µF - 310 — — — — — — 6.0 14.0 0.015µF - 315 — — — — — — 6.0 14.0 0.022µF - 322 — — — — — 6.0 14.0 0.033µF - 333 — — — — 6.0 14.0 6.0 14.0 0.047µF - 347 — — — — 6.0 14.0 7.0 14.0 0.068µF - 368 — — — — 6.0 14.0 8.0 14.0 0.10µF - 410 — — 6.0 14.0 7.0 14.0 7.5 19.0 0.15µF - 415 — — 6.0 14.0 7.5 14.0 8.5 19.0 0.22µF - 422 6.0 14.0 6.0 14.0 7.0 19.0 8.5 26.5 0.33µF - 433 6.0 14.0 6.0 19.0 8.0 19.0 10.0 26.5 0.47µF - 447 7.0 14.0 7.0 19.0 9.5 19.0 11.5 26.5 0.68µF - 468 6.5 19.0 8.0 19.0 9.0 26.5 12.0 31.5 1.0µF - 510 7.5 19.0 9.0 19.0 10.5 26.5 14.5 31.5 1.5µF - 515 8.5 19.0 9.0 26.5 11.5 31.5 — — 2.2µF - 522 9.0 19.0 10.5 26.5 13.5 31.5 — — 3.3µF - 533 9.5 26.5 12.5 26.5 — — — — 4.7µF - 547 11.0 26.5 13.0 31.5 — — — — 6.8µF - 568 12.0 31.5 15.5 31.5 — — — — 10µF - 610 14.0 31.5 17.5 31.5 — — — — VOLTAGE CODE 06 63 VDC/ 40 VAC VOLTAGE CODE 25 250 VDC/ 160 VAC VOLTAGE CODE 01 100 VDC/ 63 VAC VOLTAGE CODE 40 400 VDC/ 200 VAC Further C-values upon request pcm = L + 3.5 RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING REEL DIAMETER (mm) ORDERING CODE EXAMPLE G AMMO — MKC 1860-422/404-G X R REEL 350 MKC 1860-422/404-R X — BULK — MKC 1860-422/404 X www.vishay.com 2 For technical questions contact; [email protected] Document Number: 26028 Revision: 05-Jul-05 MKC 1860 Vishay Roederstein 100 7 5 3 2 VRMS VRMS Metallized Polycarbonate Film Capacitor Related Document: IEC 60384-6 Capacitance in μF 0.2 2 0.3 3 0.4 10 10 7 5 .0 1.0 3 2 1 102 3 5 7 103 2 5 7 3 104 2 3 5 7 f [Hz] 0.4 7 3 2.2 0.6 8 1.5 1.0 Capacitance in μF 100 VDC 2 3.3 5 7 103 2 5 7 104 3 2 5 7 105 f [Hz] 3 Permissible AC Voltage versus Frequency 1000 7 5 3 2 VRMS VRMS 1 102 105 Permissible AC Voltage versus Frequency Capacitance in μF 1000 7 5 Capacitance in μF 3 2 0.0 33 100 7 5 47 0.1 2.2 1 .5 1.0 2 3 5 7 103 2 3 Permissible AC Voltage versus Frequency Document Number: 26028 Revision: 05-Jul-05 5 7 104 2 1 3 0.0 47 0.0 68 1.0 0 .68 0.1 0.4 7 0. 33 0 .2 3 2 0.1 5 8 0.3 3 0.2 2 0.6 250 VDC 0.0 100 7 5 0.0 3 2 10 102 3 10 3 2 63 VDC 2 0.3 10 7 5 8 1.5 0.1 .0 6. 8 7 0.6 4.7 2 .2 100 7 5 3 2 2 400 VDC 105 5 7 f [Hz] 10 102 2 3 5 7 103 2 3 5 7 104 2 3 5 7 105 f [Hz] Permissible AC Voltage versus Frequency For technical questions contact; [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1