NL17SZ08 Single 2−Input AND Gate The NL17SZ08 is a single 2−input AND Gate in two tiny footprint packages. The device performs much as LCX multi−gate products in speed and drive. They should be used wherever the need for higher speed and drive are needed. http://onsemi.com MARKING DIAGRAMS Features Tiny SOT−353 and SOT−553 Packages 2.7 ns TPD at 5.0 V (typ) Source/Sink 24 mA at 3.0 V Over−Voltage Tolerant Inputs Pin For Pin with NC7SZ08P5X, TC7SZ08FU and TC7SZ08AFE Chip Complexity: FETs = 20 Designed for 1.65 V to 5.5 V VCC Operation Pb−Free Packages are Available 5 SC−70/SC−88A/SOT−353 DF SUFFIX CASE 419A 5 1 1 SOT−553 XV5 SUFFIX CASE 463B 5 1 IN B 1 IN A 2 GND 3 5 VCC 4 OUT Y L2 M G G M • • • • • • • • 5 L2 M G G 1 L2 = Device Code M = Date Code* A = Assembly Location Y = Year W = Work Week G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. PIN ASSIGNMENT Figure 1. Pinout (Top View) IN A IN B & OUT Y Figure 2. Logic Symbol Pin Function 1 In B 2 In A 3 GND 4 Out Y 5 VCC FUNCTION TABLE Output Input Y = AB A B Y L L L L H L H L L H H H ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. © Semiconductor Components Industries, LLC, 2006 March, 2006 − Rev. 7 1 Publication Order Number: NL17SZ08/D NL17SZ08 MAXIMUM RATINGS Symbol Parameter Value Unit VCC DC Supply Voltage *0.5 to )7.0 V VIN DC Input Voltage *0.5 to )7.0 V *0.5 to VCC )0.5 V VOUT DC Output Voltage IIK DC Input Diode Current *50 mA IOK DC Output Diode Current *50 mA IOUT DC Output Sink Current $50 mA ICC DC Supply Current per Supply Pin $100 mA *65 to )150 °C 260 °C TSTG Storage Temperature Range TL Lead Temperature, 1 mm from Case for 10 Seconds TJ Junction Temperature Under Bias qJA Thermal Resistance PD Power Dissipation in Still Air at 85°C MSL Moisture Sensitivity FR Flammability Rating ESD ESD Classification )150 °C SOT−353 (Note 1) SOT−553 350 496 °C/W SOT−353 SOT−553 186 135 mW Level 1 Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) Class Z Class A N/A Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow. 2. Tested to EIA/JESD22−A114−A, rated to EIA/JESD22−A114−B. 3. Tested to EIA/JESD22−A115−A, rated to EIA/JESD22−A115−A. 4. Tested to JESD22−C101−A. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit 1.65 5.5 V VCC DC Supply Voltage VIN DC Input Voltage 0 5.5 V DC Output Voltage 0 VCC + 0.5 V −40 )85 °C 0 0 100 20 ns/V VOUT TA Operating Temperature Range tr, tf Input Rise and Fall Time VCC = 3.0 V $0.3 V VCC = 5.0 V $0.5 V http://onsemi.com 2 NL17SZ08 DC ELECTRICAL CHARACTERISTICS Condition TA = 255C VCC (V) Min 0.75 VCC 0.7 VCC Symbol Parameter VIH High−Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VIL Low−Level Input Voltage 1.65 to 1.95 2.3 to 5.5 VOH High−Level Output Voltage VIN = VIL or VIH VOL Low−Level Output Voltage VIN = VIH or VOH IOH = 100 mA IOH = −3 mA IOH = −8 mA IOH = −12 mA IOH = −16 mA IOH = −24 mA IOH = −32 mA *405C v TA v 855C Typ Max Max 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC VCC − 0.1 VCC VCC − 0.1 1.65 1.29 1.52 1.29 2.3 1.9 2.1 1.9 2.7 2.2 2.4 2.2 3.0 2.4 2.7 2.4 3.0 2.3 2.5 2.3 4.5 3.8 4.0 3.8 Unit V 0.25 VCC 0.3 VCC 1.65 to 5.5 1.65 to 5.5 IOL = 100 mA IOL = 3 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA Min V V 0.1 0.1 1.65 0.08 0.24 0.24 2.3 0.20 0.3 0.3 2.7 0.22 0.4 0.4 3.0 0.28 0.4 0.4 3.0 0.38 0.55 0.55 4.5 0.42 0.55 0.55 V IIN Input Leakage Current VIN = VCC or GND 0 to 5.5 $0.1 $1.0 mA ICC Quiescent Supply Current VIN = VCC or GND 5.5 1 10 mA AC ELECTRICAL CHARACTERISTICS tR = tF = 3.0 ns TA = 255C VCC Symbol tPLH tPHL Condition (V) RL = 1 MW, CL = 15 pF 1.65 2.0 6.3 12 2.0 12.7 RL = 1 MW, CL = 15 pF 1.8 2.0 6.2 10 2.0 10.5 RL = 1 MW, CL = 15 pF 2.5 $ 0.2 0.8 3.4 7.0 0.8 7.5 RL = 1 MW, CL = 15 pF 3.3 $ 0.3 0.5 2.6 4.7 0.5 5.0 1.5 3.3 5.2 1.5 5.5 0.5 2.2 4.1 0.5 4.4 0.8 2.7 4.5 0.8 4.8 Parameter Propagation Delay (Fi (Figure 3 and d 4)) *405C v TA v 855C Min RL = 500 W, CL = 50 pF RL = 1 MW, CL = 15 pF 5.0 $ 0.5 RL = 500 W, CL = 50 pF Typ Max Min Max Unit ns CAPACITIVE CHARACTERISTICS Symbol Parameter Condition Typical Unit u4.0 pF 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 25 pF 10 MHz, VCC = 5.5 V, VI = 0 V or VCC 30 CIN Input Capacitance VCC = 5.5 V, VI = 0 V or VCC CPD Power Dissipation Capacitance (N (Note 5)) 5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no−load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. http://onsemi.com 3 NL17SZ08 tf = 3 ns tf = 3 ns 90% INPUT A and B 50% VCC 90% VCC 50% 10% 10% tPHL GND OUTPUT INPUT RL tPLH CL VOH OUTPUT Y 50% 50% A 1−MHz square input wave is recommended for propagation delay tests. VOL Figure 3. Switching Waveform Figure 4. Test Circuit DEVICE ORDERING INFORMATION Package Type Tape and Reel Size† NL17SZ08DFT2 SC70−5/SC−88A/SOT−353 4000 / Tape & Reel NL17SZ08DFT2G SC70−5/SC−88A/SOT−353 (Pb−Free) 4000 / Tape & Reel NL17SZ08XV5T2 SOT−553* 4000 / Tape & Reel NL17SZ08XV5T2G SOT−553* 4000 / Tape & Reel Device Order Number †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *All Devices in Package SOT553 are Inherently Pb−Free. http://onsemi.com 4 NL17SZ08 PACKAGE DIMENSIONS SC−88A, SOT−353, SC−70 CASE 419A−02 ISSUE J A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A−01 OBSOLETE. NEW STANDARD 419A−02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. G 5 4 −B− S 1 2 DIM A B C D G H J K N S 3 D 5 PL 0.2 (0.008) B M M N INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC −−− 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 J C K H SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 1.9 0.0748 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC −−− 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 NL17SZ08 PACKAGE DIMENSIONS SOT−553 XV5 SUFFIX 5−LEAD PACKAGE CASE 463B−01 ISSUE B D −X− 5 A 4 1 e 2 E −Y− 3 b NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. L HE c 5 PL 0.08 (0.003) M MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 DIM A b c D E e L HE X Y MIN 0.50 0.17 0.08 1.50 1.10 STYLE 1: PIN 1. 2. 3. 4. 5. INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MIN 0.020 0.007 0.003 0.059 0.043 BASE 1 EMITTER 1/2 BASE 2 COLLECTOR 2 COLLECTOR 1 STYLE 2: PIN 1. 2. 3. 4. 5. MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 CATHODE ANODE CATHODE CATHODE CATHODE SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.35 0.0531 1.0 0.0394 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 6 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. NL17SZ08/D