THIS DRAWING IS A CONTROLLED DOCUMENT. LOC REVISIONS DIST - - P LTR DESCRIPTION A B REVISED PER ECR-14-007824 ECO-15-015144: ADD UL. SAFETY ORGANIZATIONS EC RS EC 02JUNE2014 EC STORAGE TEMPERATURE: HUMIDITY: -40 $ C TO +85 $ C 21 DAYS @ 40 $ C AND 95% RH TEST SPECIFICATIONS INDUCTANCE,NOMINAL: 56.3 µH CAPACITANCE @ 1 kHz, 0.25 VAC MAX., 25 $ C # 1 $ C: LINE TO GROUND, NOMINAL: 2.62 µF LINE TO LINE, NOMINAL: 12.3 µF OPERATING SPECIFICATIONS LINE CURRENT/VOLTAGE: 400 A, 520 VAC LINE FREQUENCY: 50-60 Hz NOMINAL LEAKAGE CURRENT: MAXIMUM LEAKAGE CURRENT: 6 mA 222mA OPERATING AMBIENT TEMPERATURE RANGE @ RATED CURRENT, I : DISCHARGE RESISTOR L/G AND L/L I.R. 666k ^ /666k ^ IR (NO DISCHARGE RESISTOR) 20°C, 50% RH AND 100VDC, MIN: 6000 M ^ RECOMMENDED RECEIVING INSPECTION HIPOT @ 277V, 50HZ LINE TO GROUND FOR 1 MINIUTE: LINE TO LINE FOR 1 MINIUTE: -10 $ C TO +50 $ C RELEASED FOR PUBLICATION IN AN AMBIENT, T , HIGHER THAN 50°C, THE MAXIMUM OPERATING CURRENT, I , IS AS FOLLOWS: 2200 VDC 2160 VDC FILTER APPROVAL: I = I 100 - T O THE BEST WAY TO SELECT AND QUALIFY A FILTER IS FOR YOUR ENGINEERING TO TEST THE UNIT IN YOUR EQUIPMENT. Q R 50 LOAD ALL RIGHTS RESERVED. APVD RELIABILITY SPECIFICATIONS THIS FILTER HAS BEEN FORMALLY RECOGNIZED, CERTIFIED OR APPROVED BY THE LISTED AGENCY. THEREFORE, ALL TEST/REQUIREMENTS SPECIFIED IN THE LATEST REVISION OF THE FOLLOWING AGENCY STANDARDS HAVE BEEN MET: UL 20 DWN DATE 30 120 120 12 235 6 LINE 260 40 210 300 SCALE 1:10 45 60 12 * 10.5 25 37 115 25 * DO NOT LOOSEN INNER GROUND NUTS. TORQUE OUTER GROUND NUTS TO: 25-30 NM [220-260 IN-LB] 20 TYPICAL INSERTION LOSS COPYRIGHT COMMON MODE 50/50 C THIS DRAWING IS UNPUBLISHED. BY - 40 DIMENSIONS: TOLERANCES UNLESS OTHERWISE SPECIFIED: 2 0.4 0.25 0.2 0.1 16DEC2013 CHK 16DEC2013 APVD 16DEC2013 RS mm 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES DWN EC EC PRODUCT SPEC - - Customer Drawing 0.01 0.05 0.15 0.5 1.0 3.0 5.0 CM 12 20 63 90 76 69 DM 32 44 70 78 67 54 FINISH ^ 10 30 63 48 25 49 41 29 TE Connectivity NAME SIZE - MHz - APPLICATION SPEC WEIGHT 1469-35 (3/11) MATERIAL ^ ; DIFFERENTIAL MODE 100/100 CAGE CODE A4 00779 400APH12L 3-PHASE DELTA FILTER DRAWING NO 8-1609148-3 SCALE 1:1 SHEET RESTRICTED TO 1 OF - 1 REV B