1608(0603)Size chip capacitors : MCH18 ● ● ● ● Miniture, light weight Achieved high capacitance by thin and multi layer technology Lead-free plating terminal No polarity Quick Reference The design and specifications are subject to change without prior notice. Before ordering or using, please check the latest technical specifications. For more detail information regarding temperature characteristic code and packaging style code, please check product destination. ×2 Range of thermal compensation capacitors A,AN （CG） （C0G） （CH）Characteristic Temperature MCH18 Rated voltage(V) 50V Product thickness(mm) 0.8± 0.1 Capacitance(pF) 0.5〜820、 1,000 Packing style code 〈11pF 以上〉 ：J( ± 5％),〈0.5 〜 5pF〉 ：C( ± 0.25pF),〈5.1 〜 10pF〉 ：D( ± 0.5pF) Capacitance tolerance K, L, C E24 Nominal capacitance series Range of high dielectric constant capacitors CN （R） （B） （X7R）Characteristic Temperature MCH18 50V Rated voltage(V) CN （X5R）Characteristic 25V Product thickness(mm) Capacitance(pF) 220〜22,000 Packing style code 150,000〜1,000,000 33,000〜100,000 K （±10％） Capacitance tolerance Nominal capacitance series K, L, C E6 FN （F） （Y5V）Characteristic Temperature MCH18 10V 0.8± 0.1 Rated voltage(V) 50V 25V 16V 10V 220,000 470,000〜1,000,000 0.8± 0.1 Product thickness(mm) Capacitance(pF) 1,000〜100,000 100,000 Z （＋80％,−20％） Capacitance tolerance Nominal capacitance series K, L, C E3 0.15Min. Packing style code 0.4Min. 0.8±0.1 External dimensions (Unit : mm) 0.8±0.1 1.6±0.1 Code Prduct thickness Production designation Reel 0.8mm Paper tape(width 8mm, pitch 4mm) φ180mm （7in.） 4,000 L 0.8mm Paper tape(width 8mm, pitch 4mm) φ330mm （13in.） 16,000 C 0.8mm Bulk case ― 15,000 Reel(φ180,φ330mm):compatible with EIAJ ET-7200A Bulk case:compatible with EIAJ ET-7201A Packing Style Part No. M C H 1 8 2 Rated voltage Code Voltage 4 10V 3 16V 2 25V 5 50V F N 1 0 3 Z Capacitance-temperature characteristics Code EIA code A,AN CG （C0G） CN FN Basic ordering unit(pcs.) Packing specification K Operating temp. range(℃) Temp. coefficient or percent change −55〜＋125 0±30ppm／℃ CH −55〜＋125 0±60ppm／℃ R −55〜＋125 ±15％ B −25〜＋ 85 ±10％ （X5R） （−55〜＋ 85） （±15％） （X7R） （−55〜＋125） （±15％） F −25〜＋ 85 ＋30％, −80％ （Y5V） （−30〜＋ 85） （＋22％, −82％） K Nominal capacitance 3-digit designation accordijg to IEC Capacitance tolerance Tolerance Code C ±0.25pF （0.5〜5pF） D ±0.5pF （5.1〜10pF） J ±5％（11pF or more） K ±10％ Z ＋80％, −20％ Product No. list Thermal compensation capacitors Capacitance(pF) 0.5 0.75 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.0 4.3 4.7 5.0 5.1 5.6 6 6.2 6.8 7 7.5 8 8.2 9 9.1 10 11 12 13 15 16 18 20 Temperature A・AN （CG） （COG） （CH） Characteristic 50V Rated voltage(V) Product No. Tolerance Product thickness(mm) MCH185A （AN） 0R5C∗ MCH185A （AN） R75C∗ MCH185A （AN） 010C∗ MCH185A （AN） 1R1C∗ MCH185A （AN） 1R2C∗ MCH185A （AN） 1R3C∗ MCH185A （AN） 1R5C∗ MCH185A （AN） 1R6C∗ MCH185A （AN） 1R8C∗ MCH185A （AN） 020C∗ MCH185A （AN） 2R2C∗ C（±0.25pF） MCH185A （AN） 2R4C∗ MCH185A （AN） 2R7C∗ MCH185A （AN） 030C∗ MCH185A （AN） 3R3C∗ MCH185A （AN） 3R6C∗ MCH185A （AN） 3R9C∗ MCH185A （AN） 040C∗ MCH185A （AN） 4R3C∗ MCH185A （AN） 4R7C∗ 0.8±0.1 MCH185A （AN） 050C∗ MCH185A （AN） 5R1D∗ MCH185A （AN） 5R6D∗ MCH185A （AN） 060D∗ MCH185A （AN） 6R2D∗ MCH185A （AN） 6R8D∗ MCH185A （AN） 070D∗ D（±0.5pF） MCH185A （AN） 7R5D∗ MCH185A （AN） 080D∗ MCH185A （AN） 8R2D∗ MCH185A （AN） 090D∗ MCH185A （AN） 9R1D∗ MCH185A （AN） 100D∗ MCH185A （AN） 110J∗ MCH185A （AN） 120J∗ MCH185A （AN） 130J∗ MCH185A （AN） 150J∗ J（±5%） MCH185A （AN） 160J∗ MCH185A （AN） 180J∗ MCH185A （AN） 200J∗ Capacitance(pF) 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 1,000 Temperature Rated voltage(V) Product thickness(mm) Tolerance （±5%） J 0.8±0.1 A・AN（CG） （COG） （CH）Characteristic 50V Product No. MCH185A （AN） 220J∗ MCH185A （AN） 240J∗ MCH185A （AN） 270J∗ MCH185A （AN） 300J∗ MCH185A （AN） 330J∗ MCH185A （AN） 360J∗ MCH185A （AN） 390J∗ MCH185A （AN） 430J∗ MCH185A （AN） 470J∗ MCH185A （AN） 510J∗ MCH185A （AN） 560J∗ MCH185A （AN） 620J∗ MCH185A （AN） 680J∗ MCH185A （AN） 750J∗ MCH185A （AN） 820J∗ MCH185A （AN） 910J∗ MCH185A （AN） 101J∗ MCH185A （AN） 111J∗ MCH185A （AN） 121J∗ MCH185A （AN） 131J∗ MCH185A （AN） 151J∗ MCH185A （AN） 161J∗ MCH185A （AN） 181J∗ MCH185A （AN） 201J∗ MCH185A （AN） 221J∗ MCH185A （AN） 241J∗ MCH185A （AN） 271J∗ MCH185A （AN） 301J∗ MCH185A （AN） 331J∗ MCH185A （AN） 361J∗ MCH185A （AN） 391J∗ MCH185A （AN） 431J∗ MCH185A （AN） 471J∗ MCH185A （AN） 511J∗ MCH185A （AN） 561J∗ MCH185A （AN） 621J∗ MCH185A （AN） 681J∗ MCH185A （AN） 751J∗ MCH185A （AN） 821J∗ MCH185A （AN） 102J∗ ∗ : Packaging Code High dielectric constant capacitors Capacitance(pF) 220 330 470 680 1,000 1,500 2,200 3,300 4,700 6,800 10,000 15,000 22,000 33,000 47,000 68,000 100,000 150,000 220,000 330,000 470,000 680,000 1,000,000 Temperature Rated voltage(V) Product thickness(mm) Tolerance K （±10%） 0.8±0.1 CN （R） （B） （X7R） Characteristic 50V 25V Product No. Product No. MCH185CN221K∗ MCH185CN331K∗ MCH185CN471K∗ MCH185CN681K∗ MCH185CN102K∗ MCH185CN152K∗ MCH185CN222K∗ MCH185CN332K∗ MCH185CN472K∗ MCH185CN682K∗ MCH185CN103K∗ MCH185CN153K∗ MCH185CN223K∗ MCH182CN333K∗ MCH182CN473K∗ MCH182CN683K∗ MCH182CN104K∗ CN （X5R） Characteristic 10V Product No. MCH184CN154K∗ MCH184CN224K∗ MCH184CN334K∗ MCH184CN474K∗ MCH184CN684K∗ MCH184CN105K∗ ∗ : Packaging Code Capacitance(pF) 1,000 2,200 4,700 10,000 22,000 47,000 100,000 220,000 470,000 1,000,000 Temperature Rated voltage(V) Tolerance Product thickness(mm) Z（＋80%, −20%） 0.8±0.1 FN （F） （Y5V） Characteristic 50V Product No. MCH185FN102Z∗ MCH185FN222Z∗ MCH185FN472Z∗ MCH185FN103Z∗ MCH185FN223Z∗ MCH185FN473Z∗ MCH185FN104Z∗ 25V Product No. MCH182FN104Z∗ 16V Product No. MCH183FN224Z∗ 10V Product No. MCH184FN474Z∗ MCH184FN105Z∗ ∗ : Packaging Code MCH03 Series, MCH15 Series, MCH18 Series, MCH21 Series, MCH31 Series, Characteristics A （CG） （C0G） （CH） Characteristics 100 10000 8 MCH15:1pF 1000 MCH18:1pF 100 MCH03:10pF 10 2 0 -2 10 1 MCH15:10pF MCH18:10pF MCH18:100pF 0.1 -4 MCH31 10,000pF I Z I ESR (Ω) 4 Impedance (Ω) Capacitance change (％) 6 1 0.1 MCH15:100pF 0.01 -80 MCH32 100,000pF 0.01 -6 -40 0 40 80 120 0.001 1 160 10 Temperature (℃) 100 1000 10000 0.001 1 MCH21 10,000pF 100 10 1000 Frequency(Hz) Frequency (MHz) CN （R） （B） （X5R） （X7R） Characteristics 30 10000 MCH18:1,000pF MCH15:1,000pF 20 1000 10 0 -30 10 5 -80 -40 0 40 80 120 160 Impedance (Ω) -20 10 I Z I ESR (Ω) 100 -10 Dissipation factor (％) Capacitance change (％) 10 100 MCH03:1,000pF MCH15:10,000pF MCH18:100,000pF 1 MCH31 10μF 1 MCH21 1μF 0.1 MCH18:10,000pF 0.1 0.01 MCH32 22μF 0.01 0.001 1 10 Temperature (℃) 100 1000 10000 0.001 10 Frequency (MHz) 100 1000 10000 Frequency(Hz) FN （F） （Y5V） Characteristics 1000 10 60 50 40 30 20 10 -40 0 40 80 Temperature (℃) 120 160 Impedance (Ω) -60 -70 -80 MCH15:1,000pF 10 1 0.1 0.01 0.001 1 MCH31 10μF MCH18:1,000pF 100 I Z I ESR (Ω) -10 -20 -30 -40 -50 -80 100 10000 Dissipation factor (％) Capacitance change (％) 20 10 0 1 0.1 MCH18:10,000pF 0.01 MCH15:10,000pF MCH18:100,000pF 10 MCH15:100,000pF 100 Frequency (MHz) 1000 10000 MCH21 1μF 0.001 10 MCH32 47μF 100 1000 Frequency(Hz) 10000 MCH32 Series, MCH43 Series, MCH55 Series Packing specification Carrier tape dimensions (Unit:mm) MCH03 MCH15 t t φJ φJ E A E D A C D B F F t1 A B MCH03 0.37 0.67 ±0.03 ±0.03 t1 H (Paper taping) Code C B H (Paper taping) Pull direction C D E F H J 8.0 ±0.2 3.5 ±0.05 1.75 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 t t1 Code 0.42 0.5 ±0.02 MAX +0.1 0 A B 0.65 1.15 MCH15 ±0.05 ±0.05 MCH18 Pull direction C D E F H J 8.0 ±0.2 3.5 ±0.05 1.75 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 t t1 0.7 0.8 ±0.05 MAX +0.1 0 MCH21 t t φJ t φJ E A E D A C D B t1 G F H t1 (Paper taping) Code G F H (Paper taping) Pull direction Pull direction t A B C D E F G H J t t1 Code A B C D E F G H J 1.0 1.8 8.0 3.5 1.75 4.0 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 1.05 MAX. 1.2 MAX. MCH21 1.5 ±0.2 2.3 ±0.2 8.0 ±0.3 3.5 ±0.05 1.75 ±0.1 4.0 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 MCH18 ±0.05 ±0.05 ±0.3 ±0.05 ±0.1 +0.1 0 MCH31 t C B t Paper 1.1 MAX. +0.1 0 t1 Pulastic 0.3 MAX. 2.5 MAX. MCH32 t t φJ t φJ E E A D A C D t1 C B B G F t1 H (Paper taping) t Code A B C D E F G H J MCH31 1.9 ±0.2 3.5 ±0.2 8.0 ±0.3 3.5 ±0.05 1.75 ±0.1 4.0 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 t Paper t1 Code A B MCH32 2.9 3.6 Pulastic 1.1 MAX. +0.1 0 G F H (Paper taping) Pull direction 0.3 MAX. 2.5 MAX. C D Pull direction E 8.0±0.3 3.5±0.05 1.75 (12.0±0.3) (5.0±0.03) ±0.1 F G H J 4.0 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 +0.1 0 t t1 Pulastic 0.6 2.5MAX. MAX. (6.5MAX.) （）内は製品厚みの2.5mmに適用 MCH43 t MCH55 t t φJ t φJ E E A D A C D B B t1 G F t1 H (Paper taping) Code A B C D E F G H J MCH43 3.6 4.9 12.0 ±0.3 5.5 ±0.05 1.75 ±0.1 8.0 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 +0.1 0 G F H (Paper taping) Pull direction t t1 Pulastic 0.6 MAX. 6.5 MAX. Pull direction Code A B C D E F G H J MCH55 5.4 6.1 12.0 ±0.3 5.5 ±0.05 1.75 ±0.1 8.0 ±0.1 2.0 ±0.05 4.0 ±0.1 φ1.5 +0.1 0 t t1 Pulastic 0.6 MAX. 6.5 MAX. C Packing specification Reel dimensions (Unit:mm) 9.5 ±0.5 φ80 ±1 φ13 ±0.2 13.5 ±1.0 φ330 ±2 MCH15 MCH18 11.4 ±1.0 φ 60 +10 0 φ180 −1.5 φ13 ±0.2 MCH03 MCH15 MCH18 MCH21 MCH31 MCH32 MCH43 MCH55 φ330mm Plastic reel 9.0 ±0.3 φ180mm Plastic reel Label position Label position Bulk case dimensions (Unit:mm) E I A JE T ‑ 7 2 0 1 Ac o m p l i a n t MCH15 MCH18 Slider 12 Shutter 36 110 For fundamental considerations on capacitors, refe to Electric Industries Association of Japan, technical report, "EIAJ RCR-2333,Guideline of notabilia for fixed multilayer ceramic capacitors for use in electronic equipment". Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0