K6X1008T2D Family CMOS SRAM Document Title 128Kx8 bit Low Power CMOS Static RAM Revision History Revision No. History Draft Data Remark 0.0 Initial draft July 15, 2002 Preliminary 0.1 Revised - Deleted 32-TSOP1-0820R, 32-TSOP1-0813.4F/R Package Type. - Added Commercial product. - Added 55ns product( Vcc = 3.0V~3.6V) December 4, 2002 Preliminary 0.2 Revised - Added Lead Free 32-SOP-525 Product - Added Lead Free 32-TSOP1-0820F Product June 23, 2003 Preliminary 1.0 Finalized - Changed ICC from 3mA to 2mA - Changed ICC2 from 25mA to 20mA - Changed ISB1(Commercial) from 10µA to 6µA - Changed ISB1(industrial) from 10µA to 6µA - Changed ISB1(Automotive) from 20µA to 10µA - Changed IDR(Commercial) from 10µA to 6µA - Changed IDR(industrial) from 10µA to 6µA - Changed IDR(Automotive) from 20µA to 10µA September 16, 2003 Final The attached datasheets are provided by SAMSUNG Electronics. SAMSUNG Electronics CO., LTD. reserves the right to change the specifications and products. SAMSUNG Electronics will answer to your questions. If you have any questions, please contact the SAMSUNG branch offices. 1 Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM 128Kx8 bit Super Low Power and Low Voltage full CMOS Static RAM FEATURES GENERAL DESCRIPTION • Process Technology: Full CMOS • Organization: 128K x 8 • Power Supply Voltage: 2.7~3.6V • Low Data Retention Voltage: 1.5V(Min) • Three state outputs • Package Type: 32-SOP-525, 32-TSOP1-0820F 32-SOP-525, 32-TSOP1-0820F The K6X1008T2D families are fabricated by SAMSUNG′s advanced CMOS process technology. The families support verious operating temperature ranges and have various package types for user flexibility of system design. The families also support low data retention voltage for battery back-up operation with low data retention current. PRODUCT FAMILY Power Dissipation Product Family Operating Temperature Vcc Range K6X1008T2D-B Commercial(0~70°C) K6X1008T2D-F Industrial(-40~85°C) K6X1008T2D-Q Automotive(-40~125°C) Speed Standby Operating (ISB1, Max) (ICC2, Max) 551)/702)/85ns 6µA 2.7~3.6V 20mA 702)/85ns 10µA PKG Type 32-SOP-525 32-TSOP1-0820F 32-SOP-525 32-TSOP1-0820F 1. This parameter is measured in the voltage range of 3.0V~3.6V with 30pF test load. 2. This parameter is measured with 30pF test load. PIN DESCRIPTION FUNCTIONAL BLOCK DIAGRAM Clk gen. NC 1 32 VCC A16 2 31 A15 A14 3 30 CS2 A12 4 29 WE A7 5 28 A13 A6 6 27 A8 A5 7 26 A9 A4 8 25 A11 A3 9 24 OE A2 10 23 A10 A1 11 22 CS1 32-SOP A0 12 21 I/O8 I/O1 13 20 I/O7 I/O2 14 19 I/O6 I/O3 15 18 I/O5 VSS 16 17 I/O4 A11 A9 A8 A13 WE CS2 A15 VCC NC A16 A14 A12 A7 A6 A5 A4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 32-TSOP Type1-Forward 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 OE A10 CS1 I/O8 I/O7 I/O6 I/O5 I/O4 VSS I/O3 I/O2 I/O1 A0 A1 A2 A3 Row Addresses I/O1 I/O8 Row select Data cont Precharge circuit. Memory array I/O Circuit Column select Data cont Column Addresses Name A0~A16 WE CS1,CS2 Function Address Inputs CS1 Write Enable Input CS2 WE Chip Select Input OE Output Enable Input I/O1~I/O8 Data Inputs/Outputs Vcc Power Vss Ground NC No Connection Control logic OE SAMSUNG ELECTRONICS CO., LTD. reserves the right to change products and specifications without notice. 2 Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM PRODUCT LIST Commercial Products(0~70°C) Part Name Industrial Products(-40~85°C) Function K6X1008T2D-GB551) K6X1008T2D-GB70 K6X1008T2D-GB85 K6X1008T2D-TB551) K6X1008T2D-TB70 K6X1008T2D-TB85 K6X1008T2D-BB551,2) K6X1008T2D-BB702) K6X1008T2D-BB852) K6X1008T2D-PB551,2) K6X1008T2D-PB702) K6X1008T2D-PB852) 32-SOP, 55ns, LL 32-SOP, 70ns, LL 32-SOP, 85ns, LL 32-TSOP-F, 55ns, LL 32-TSOP-F, 70ns, LL 32-TSOP-F, 85ns, LL 32-SOP, 55ns, LL 32-SOP, 70ns, LL 32-SOP, 85ns, LL 32-TSOP-F, 55ns, LL 32-TSOP-F, 70ns, LL 32-TSOP-F, 85ns, LL Part Name Atomotive Products(-40~125°C) Function K6X1008T2D-GF551) K6X1008T2D-GF70 K6X1008T2D-GF85 K6X1008T2D-TF551) K6X1008T2D-TF70 K6X1008T2D-TF85 K6X1008T2D-BF551,2) K6X1008T2D-BF702) K6X1008T2D-BF852) K6X1008T2D-PF551,2) K6X1008T2D-PF702) K6X1008T2D-PF852) 32-SOP, 55ns, LL 32-SOP, 70ns, LL 32-SOP, 85ns, LL 32-TSOP-F, 55ns, LL 32-TSOP-F, 70ns, LL 32-TSOP-F, 85ns, LL 32-SOP, 55ns, LL 32-SOP, 70ns, LL 32-SOP, 85ns, LL 32-TSOP-F, 55ns, LL 32-TSOP-F, 70ns, LL 32-TSOP-F, 85ns, LL Part Name Function K6X1008T2D-GQ70 K6X1008T2D-GQ85 K6X1008T2D-TQ70 K6X1008T2D-TQ85 32-SOP, 70ns, L 32-SOP, 85ns, L 32-TSOP-F, 70ns, L 32-TSOP-F, 85ns, L 1. Operating voltage range is 3.0V~3.6V 2. Lead Free Product FUNCTIONAL DESCRIPTION CS1 CS2 OE WE I/O Mode Power 1) X 1) X High-Z Deselected Standby X1) X1) High-Z Deselected Standby H H H High-Z Output Disabled Active L H L H Dout Read Active L H X1) L Din Write Active H X X1) L L 1) 1. X means don′t care (Must be in high or low states) ABSOLUTE MAXIMUM RATINGS1) Item Voltage on any pin relative to Vss Voltage on Vcc supply relative to Vss Power Dissipation Storage temperature Operating Temperature Symbol Ratings Unit Remark VIN,VOUT -0.2 to VCC+0.3V(Max. 3.9V) V - VCC -0.2 to 3.9 V - PD 1.0 W - TSTG -65 to 150 °C - 0 to 70 °C K6X1008T2D-B TA -40 to 85 °C K6X1008T2D-F -40 to 125 °C K6X1008T2D-Q 1. Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. Functional operation should be restricted to recommended operating condition. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 3 Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM RECOMMENDED DC OPERATING CONDITIONS1) Item Symbol Min Typ Max Unit Supply voltage Vcc 2.7 3.0/3.3 3.6 V Ground Vss 0 0 0 Input high voltage VIH 2.2 - Input low voltage VIL -0.2 3) V Vcc+0.2 - V 2) 0.6 V Note: 1. Commercial Product: TA=0 to 70°C, Otherwise specified . Industrial Product: TA=-40 to 85°C, Otherwise specified Automotive Product: TA=-40 to 125°C, Otherwise specified 2. Overshoot: Vcc+3.0V in case of pulse width≤30ns. 3. Undershoot: -3.0V in case of pulse width≤30ns. 4. Overshoot and undershoot are sampled, not 100% tested. CAPACITANCE1) (f=1MHz, TA=25°C) Symbol Test Condition Min Max Unit Input capacitance Item CIN VIN=0V - 8 pF Input/Output capacitance CIO VIO=0V - 10 pF 1. Capacitance is sampled, not 100% tested DC AND OPERATING CHARACTERISTICS Item Symbol Test Conditions Min Typ Max Unit Input leakage current ILI VIN=Vss to Vcc -1 - 1 µA Output leakage current ILO CS1=VIH or CS2=VIL or OE=VIH or WE=VIL, VIO=Vss to Vcc -1 - 1 µA Operating power supply current ICC IIO=0mA, CS1=VIL, CS2=VIH, VIN=VIH or VIL, Read - - 2 mA ICC1 Cycle time=1µs, 100%duty, IIO=0mA, CS1≤0.2V, CS2≥Vcc-0.2V, VIN≤0.2V or VIN≥VCC-0.2V - - 3 mA ICC2 Cycle time=Min, 100% duty, IIO=0mA, CS1=VIL, CS2=VIH, VIN=VIH or VIL - - 20 mA Output low voltage VOL IOL=2.1mA - - 0.4 V Output high voltage VOH IOH=-1.0mA 2.4 - - V Standby Current(TTL) ISB CS1=VIH, CS2=VIL, Other inputs=VIH or VIL Average operating current Standby Current(CMOS) ISB1 CS1≥Vcc-0.2V, CS2≥Vcc-0.2V or CS2≤0.2V, Other inputs=0~Vcc 4 - - 0.3 mA K6X1008T2D-B - - 6 µA K6X1008T2D-F - - 6 µA K6X1008T2D-Q - - 10 µA Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM AC OPERATING CONDITIONS TEST CONDITIONS( Test Load and Input/Output Reference) Input pulse level: 0.4 to 2.2V Input rising and falling time: 5ns Input and output reference voltage:1.5V Output load(see right): CL=100pF+1TTL CL=30pF+1TTL CL1) 1. Including scope and jig capacitance AC CHARACTERISTICS (VCC=2.7~3.6V, Commercial product:TA=0 to 70°C, Industrial product:TA=-40 to 85°C, Automotive product:TA=-40 to 125°C ) Speed Bins Parameter List Symbol Min Read Write 70ns 55ns1) Max Min Units 85ns Max Min Max Read Cycle Time tRC 55 - 70 - 85 - ns Address Access Time tAA - 55 - 70 - 85 ns Chip Select to Output tCO - 55 - 70 - 85 ns Output Enable to Valid Output tOE - 25 - 35 - 40 ns Chip Select to Low-Z Output tLZ 10 - 10 - 10 - ns Output Enable to Low-Z Output tOLZ 5 - 5 - 5 - ns Chip Disable to High-Z Output tHZ 0 25 0 25 0 25 ns Output Disable to High-Z Output tOHZ 0 25 0 25 0 25 ns Output Hold from Address Change tOH 10 - 10 - 15 - ns Write Cycle Time tWC 55 - 70 - 85 - ns Chip Select to End of Write tCW 45 - 60 - 70 - ns Address Set-up Time tAS 0 - 0 - 0 - ns Address Valid to End of Write tAW 45 - 60 - 70 - ns Write Pulse Width tWP 40 - 50 - 60 - ns Write Recovery Time tWR 0 - 0 - 0 - ns Write to Output High-Z tWHZ 0 25 0 25 0 30 ns Data to Write Time Overlap tDW 20 - 25 - 35 - ns Data Hold from Write Time tDH 0 - 0 - 0 - ns End Write to Output Low-Z tOW 5 - 5 - 5 - ns 1. Voltage range is 3.0V~3.6V for commercial and industrial product. DATA RETENTION CHARACTERISTICS Item Symbol Test Condition Vcc for data retention VDR CS1≥Vcc-0.2V1) Data retention current IDR Vcc=3.0V, CS1≥Vcc-0.2V1) Data retention set-up time tSDR Recovery time tRDR Min Typ Max Unit 2.0 - 3.6 V K6X1008T2D-B - - 6 µA K6X1008T2D-F - - 6 µA 10 µA 0 - - 5 - - K6X1008T2D-Q See data retention waveform ms 1. CS1≥Vcc-0.2V, CS2≥VCC-0.2V, or CS2≤0.2V 5 Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM TIMING DIAGRAMS TIMING WAVEFORM OF READ CYCLE(1) (Address Controlled, CS1=OE=VIL, CS2=WE=VIH) tRC Address tAA tOH Data Out Data Valid Previous Data Valid TIMING WAVEFORM OF READ CYCLE(2) (WE=VIH) tRC Address tOH tAA tCO1 CS1 tHZ(1,2) CS2 tCO2 tOE OE Data out High-Z tOHZ tOLZ tLZ Data Valid NOTES (READ CYCLE) 1. tHZ and tOHZ are defined as the time at which the outputs achieve the open circuit conditions and are not referenced to output voltage levels. 2. At any given temperature and voltage condition, tHZ(Max.) is less than tLZ(Min.) both for a given device and from device to device interconnection. 6 Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM TIMING WAVEFORM OF WRITE CYCLE(1) (WE Controlled) tWC Address tWR(4) tCW(2) CS1 tAW CS2 tCW(2) tWP(1) WE tAS(3) tDW tDH Data Valid Data in tWHZ Data out tOW Data Undefined TIMING WAVEFORM OF WRITE CYCLE(2) (CS1 Controlled) tWC Address tCW(2) tAS(3) tWR(4) CS1 tAW CS2 tWP(1) WE tDW Data in Data out tDH Data Valid High-Z High-Z 7 Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM TIMING WAVEFORM OF WRITE CYCLE(3) (CS2 Controlled) tWC Address tAS(3) tCW(2) tWR(4) CS1 tAW CS2 tCW(2) tWP(1) WE tDW Data Valid Data in Data out tDH High-Z High-Z NOTES (WRITE CYCLE) 1. A write occurs during the overlap of a low CS1, a high CS2 and a low WE. A write begins at the latest transition among CS1 goes low, CS2 going high and WE going low: A write end at the earliest transition among CS1 going high, CS2 going low and WE going high, tWP is measured from the begining of write to the end of write. 2. tCW is measured from the CS1 going low or CS2 going high to the end of write. 3. tAS is measured from the address valid to the beginning of write. 4. tWR is measured from the end of write to the address change. tWR applied in case a write ends as CS1 or WE going high tWR2 applied in case a write ends as CS2 going to low. DATA RETENTION WAVE FORM CS1 controlled VCC tSDR Data Retention Mode tRDR 2.7V 2.2V VDR CS≥VCC - 0.2V CS1 GND CS2 controlled Data Retention Mode VCC 2.7V CS2 tSDR tRDR VDR CS2≤0.2V 0.4V GND 8 Revision 1.0 September 2003 K6X1008T2D Family CMOS SRAM PACKAGE DIMENSIONS Units: millimeters(inches) 32 PLASTIC SMALL OUTLINE PACKAGE (525mil) 0~8° #17 14.12±0.30 0.556±0.012 #1 11.43±0.20 0.450±0.008 #16 20.47±0.20 0.806±0.008 0.80±0.20 0.031±0.008 0.20 +0.10 -0.05 0.008+0.004 -0.002 2.74±0.20 0.108±0.008 3.00 0.118 MAX 20.87 MAX 0.822 13.34 0.525 #32 0.10 MAX 0.004 MAX +0.100 -0.050 +0.004 0.016 -0.002 0.41 ( 0.71 ) 0.028 1.27 0.050 0.05 0.002 MIN 32 PIN THIN SMALL OUTLINE PACKAGE TYPE I (0820F) 0.20 +0.10 -0.05 0.008+0.004 -0.002 20.00±0.20 0.787±0.008 #1 #32 8.40 0.331 MAX #17 #16 0.25 0.010 TYP 1.00±0.10 0.039±0.004 1.20 0.047 MAX 18.40±0.10 0.724±0.004 0.15 +0.10 -0.05 0.006+0.004 -0.002 0~8° 0.45 ~0.75 0.018 ~0.030 ( 9 0.05 0.002 MIN 0.10 MAX 0.004 MAX 0.50 0.0197 0.25 ) 0.010 8.00 0.315 ( 0.50 ) 0.020 Revision 1.0 September 2003