ACDC 20/40 Watts ECE Series xppower.com • Ultra Compact Size • Single Outputs from 3.3 to 48 V • Encapsulated • PCB & Chassis Mount Versions • Class II Construction • Peak Load Capability • 3 Year Warranty GREEN•POWER Specification Input General • 85-264 VAC (120-370 VDC) derate load from 100% at 90 VAC to 90% at 85 VAC Input Frequency • 47-63 Hz Input Current • ECE20: 0.3 A rms at 230 VAC ECE40: 0.5 A rms at 230 VAC Power Factor • EN61000-3-2 Class A Inrush Current • 20 A at 115 VAC, 40 A at 230 VAC, cold start at 25 °C Earth Leakage Current • Class II construction no earth Input Protection • ECE20: Internal T1 A/250 VAC fuse ECE40: Internal T2 A/250 VAC fuse No Load Input Power • <0.3 W Input Voltage Output Output Voltage Initial Set Accuracy Minimum Load Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Transient Response • • • • • • • • • Ripple & Noise • Overvoltage Protection Overload Protection Short Circuit Protection Temperature Coefficient 22 • • • • See tables ±1% No minimum load required 2 s max 16 ms max 8 ms minimum at full load & 115 VAC ±0.5% max ±1% max, ±2% max for ECE40US03/05-S 4% max deviation, recovery to within 1% in 500 µs for a 25% load change 3.3-5 V versions: 60 mV pk-pk, 3.3-5 V ‘ECE40-S’ versions: 75 mV pk-pk (see note 5), all other models 1% pk-pk max 20 MHz bandwidth 115-140% Vnom, auto recovery 110-180% Trip and restart (Hiccup mode) 0.05%/°C Efficiency Isolation Switching Frequency Power Density MTBF • • • • See tables 3000 VAC Input to Output 70 kHz typical ECE20: 9.97 W/In3 ECE40: 7.58 W/In3 • >450 kHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature • -25 °C to +70 °C, derate linearly from 100% at +50 °C to 50% at +70 °C Cooling • Convection-cooled Operating Humidity • 95% RH, non-condensing Storage Temperature • -40 °C to +85 °C Operating Altitude • 3000 m Vibration • 2 g, 10 Hz to 500 kHz, 10 mins/cycle, 60 mins each cycle EMC & Safety Emissions Harmonic Currents ESD Immunity Radiated Immunity • • • • EFT/Burst Surge • • Conducted Immunity Magnetic Fields Dips & Interruptions • • • Safety Approvals • EN55022, level B conducted & radiated EN61000-3-2, EN61000-3-3 EN61000-4-2, level 3 Perf Criteria A EN61000-4-3, 10 V/m 80% mod Perf Criteria A EN61000-4-4, level 3 Perf Criteria A EN61000-4-5, installation Class 3, Perf Criteria A EN61000-4-6, 10 Vrms Perf Criteria A EN61000-4-8, 10 A/m Perf Criteria A EN61000-4-11, 30% for 10 ms, 60% for 100 ms, 100% for 5000 ms Perf Criteria A, B, B EN60950-1, UL60950-1, CSA22.2 No. 234 per cUL Output Power 13.5 20.0 20.0 20.0 20.0 20.0 20.0 35.0 40.0 40.0 40.0 40.0 40.0 40.0 Output Current Output Voltage W W W W W W W W W W W W W W 3.3 5.0 9.0 12.0 15.0 24.0 48.0 3.3 5.0 9.0 12.0 15.0 24.0 48.0 Nominal 4.50 A 4.00 A 2.22 A 1.67 A 1.33 A 0.83 A 0.42 A 9.00 A 8.00 A 4.44 A 3.33 A 2.67 A 1.67 A 0.83 A VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC Efficiency(4) Peak(1) 5.85 A 5.20 A 2.89 A 2.17 A 1.73 A 1.08 A 0.55 A 11.70 A 10.40 A 5.77 A 4.33 A 3.47 A 2.17 A 1.08 A ACDC ECE20/40 Models and Ratings Model Number 73% 77% 83% 82% 83% 82% 86% 73% 77% 80% 84% 84% 85% 86% ECE20US03 ECE20US05 ECE20US09 ECE20US12 ECE20US15 ECE20US24 ECE20US48 ECE40US03(2)(3) ECE40US05(2)(3) ECE40US09(2)(3) ECE40US12(2)(3) ECE40US15(2)(3) ECE40US24(2)(3) ECE40US48(2)(3) Notes 1. Peak load lasting <30 s with a maximum duty cycle of 10%, average output power not to exceed nominal power. 2. Add suffix -S to model number to denote chassis mount with screw terminal type, e.g. ECE40US12-S.Only available with ECE40 models. 3. A screw terminal versions (-S) is available with DIN Clip attached. Add suffix ‘D’, e.g. ECE40US24-SD. DIN Rail mounting clip is available as a separate item, order code ECL25/30 DIN CLIP. 4. Average of efficiencies measured at 25%, 50%, 75% & 100% load with 230 VAC input. 5. 3.3 & 5 V ECE40-S versions meet 75 mV pk-pk with 20 MHz bandwidth and 0.1 µF capacitor across output terminals. Mechanical Details ECE20 ECE40 0.80 ±0.01 (20.3 ±0.3) 3.10 (78.7) 0.13 (3.4) 0.13 (3.2) 0.40 ±0.01 (10.1 ±0.3) ACN +Vo ACN TOP VIEW 1.07 (27.2) 1.50 (38.1) -Vo 0.59 (15.0) 1.18 (30.0) TOP VIEW -Vo ACL 0.16 (4.1) 1.80 ±0.01 (45.7 ±0.3) 2.06 (52.4) ACL 0.13 (3.4) +Vo 2.85 (72.4) 0.91 (23.0) 1.10 (27.9) 4x ø 0.04 (ø1.0) 4 x ø0.04 (ø1.0) 0.39 (10.0) 0.39 (10.0) ECE40 Screw Terminal (S) 3.43 (87.0) 4x ø0.14 (4x ø3.5) 0.44 (11.2) TOP VIEW ACN 1.57 (40.0) ACL -Vo 0.84 (21.3) 1.20 +Vo (30.5) 3.01 (76.4) 0.39 (10.0) Notes 1. Dimensions in inches (mm). 2. Weight: ECE20: 0.13 lbs (60 g) ECE40: 0.33 lbs (150 g) ECE40 Optional Screw Terminal: 0.37 lbs (170 g) 3. Tolerances: x.xx = ± 0.02 (x.x = ± 0.5), x.xxx = ± 0.01 (x.xx = ± 0.25) 1º 1.12 (28.5) 0.27 (6.8) 0.10 (2.5) 3.78 (96.0) Optional DIN clip 23