Surface Mount Zener Diode COMCHIP www.comchip.com.tw CZRA1110 Thru CZRA1350 Voltage: 110 - 350 Volts Power: 1.0 Watt Features DO-214AC (SMA) Ideal for surface mount applications Easy pick and place 5 & 10% voltage tolerances available Wide voltage range Meets UL specification 94V-0 0.067(1.70) 0.051(1.29) 0.110(2.79) 0.086(2.18) 0.180(4.57) 0.160(4.06) 0.012(0.31) 0.006(0.15) Mechanical data 0.091(2.31) 0.067(1.70) Case: JEDEC DO-214AC molded plastic Terminals: Solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting position: Any 0.059(1.50) 0.035(0.89) 0.209(5.31) 0.185(4.70) 0.008(0.20) 0.004(0.10) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characterics Maximum R atings DC Power Dissipation with TL = 75 ...PD Lead Length = .375 Inches Derate Above 50 °C Operating & Storage Temperature Range...TJ , T S T R G MDS0211001A CZRA1110 to CZRA1350 U n i ts 1 W att 6.67 m W / °C -65 to 100 °C Page 1 Surface Mount Zener Diode COMCHIP www.comchip.com.tw Rating and Characteristic Curves (CZRA1110 Thru CZRA1350) Part Num CZRA1110 CZRA1115 CZRA1120 CZRA1130 CZRA1140 CZRA1150 CZRA1160 CZRA1170 CZRA1180 CZRA1190 CZRA1200 CZRA1210 CZRA1220 CZRA1230 CZRA1240 CZRA1250 CZRA1260 CZRA1270 CZRA1280 CZRA1290 CZRA1300 CZRA1310 CZRA1320 CZRA1330 CZRA1340 CZRA1350 Nominal Zener Voltage VZ (V) 110 115 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 Test Current IZT (mA) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Max. Zener Impedance ZZT @ IZT ZZK @ IZK IZK (Ohm) (Ohm) (mA) 750 5000 0.25 750 5000 0.25 850 5000 0.25 1000 5000 0.25 1200 5000 0.25 1300 5000 0.25 1500 5000 0.25 2200 5000 0.25 2200 5000 0.25 2500 5000 0.25 2500 8000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9000 0.25 5000 9500 0.25 5000 9500 0.25 5000 9500 0.25 5000 9500 0.25 5000 9500 0.25 Max. Reverse Leakage Current @ VR IR (µA) VR (V) 0.5 80 0.5 85 0.5 90 0.5 95 0.5 105 0.5 110 0.5 120 0.5 130 0.5 140 0.5 150 0.5 165 0.5 165 0.5 170 0.5 175 0.5 180 0.5 190 0.5 195 0.5 200 0.5 210 0.5 215 0.5 220 0.5 225 0.5 233 0.5 240 0.5 250 0.5 260 Max.Forward Voltage @ IF= 1A (25°C) (V) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 NOTES: 1. For 10% Tolerance on Zener Voltage, Specify No Suffix. For 5% Tolerance, Specify Suffix ëëAíí. (Example: CZRA1110 = 110V +/- 5%) 2. TA = 25°C unless otherwise specified. Measurements made at Thermal Equilibrium. MDS0211001A Page 2 Surface Mount Zener Diode COMCHIP www.comchip.com.tw Rating and Characteristic Curves (CZRA1110 Thru CZRA1350) FIG. 2 - ZENER VOLTAGE VERSUS ZENER CURRENT FIG. 1 - MAXIMUM CONTINUOUS POWER DISSIPARION IZ, ZENER CURRENT (mA) REVERSE POWER DISSIPATION, WATTS 10 1 SINGLE PHASE HALF WAVF 60HZ RESISTIVE OR INDUCTIVE LOAD 0.375”(9.5mm) LEAD LENGTHS 5 2 1 0.5 0.2 0.1 100 0 25 50 75 100 125 150 150 175 200 250 300 350 400 VZ, ZENER VOLTAGE (VOLTS) LEAD TEMPERATURE, к FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE CURRENT,MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 10 1.0 0.1 4 1.0 .4 0.1 TJ=25к .04 .01 TJ=25к PULSE WIDTH=300us 1% DUTY CYCLE 0 20 40 60 80 100 120 140 PERCENT OF RATED ZENER VOLTAGE .01 .6 .8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL TEMPERATURE COEFFICIENTS ӰVZ TEMPERATURE COEFFICIENT (mV/к к) й IZT .4 1000 500 200 100 50 20 10 10 20 50 100 200 400 VZ ZENER VOLTAGE йIZT(VOLTS) MDS0211001A Page 3 1000