CD43__90A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A C F G H 1 3 45 76 2 T B J K "U" THREAD "S" FASTON TAB L R M D LABEL P N 4 1 5 7 Q CD43__90A Dual SCR Isolated TM POW-R-BLOK Module 90 Amperes / Up to 1600 Volts 6 2 ~ TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1600 Volts 3 - + CONNECTION DIAGRAM Features: TElectrically Isolated Heatsinking TDBC Alumina (Al2O3) Insulator T Copper Baseplate T Low Thermal Impedance for Improved Current Capability T UL Recognized (E78240) Benefits: Ordering Information: CD43 Outline Dimensions Dimension Inches Millimeters A 3.62 92 B 0.83 21 C 3.15 80 D 1.18 30 F 0.59 15 G 0.79 20 H 0.79 20 J 0.16 4 K 0.23 5.8 L 0.61 15.5 M 1.14 29 N 0.25 6.3 P 0.94 24 Q 1.18 30 R 0.71 18 S 0.11 x .03 2.8 x 0.8 T 0.25 6.3 U M5 M5 Select the complete nine digit module part number from the table below. Example: CD431690A is a 1600Volt, 90 Ampere Dual SCR Isolated TM POW-R-BLOK Module TNo Additional Insulation Components Required TEasy Installation TNo Clamping Components Required T Reduce Engineering Time Applications: Type CD43 Voltage Volts (x100) Current Amperes (x 1) 08 12 16 90 TBridge Circuits TAC & DC Motor Drives TBattery Supplies TPower Supplies TLarge IGBT Circuit Front Ends TLighting Control THeat & Temperature Control TWelders Note: Dimensions are for reference only. Revision Date: 01/26/2002 CD43__90A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1600 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1600 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V A RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive Peak Ten Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180° Conduction, TC=87°C IT(RMS) 140 180° Conduction, TC=87°C (AC Switch) IT(RMS) 200 A 180° Conduction, TC=87°C IT(AV) 90 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1570 A 60 Hz, No VRRM reapplied, Tj=125°C ITSM 1870 A 60 Hz, No VRRM reapplied, Tj=25°C ITSM 2100 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1500 A 50 Hz, No VRRM reapplied, Tj=125°C ITSM 1785 A 50 Hz, No VRRM reapplied, Tj=25°C ITSM 2000 A 60 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1210 A 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 1155 A 60 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=125°C ITSM 960 A ITSM 940 2 A 2 8.3 ms, 100% VRRM reapplied, Tj=125°C It 10,270 A sec 8.3 ms, No VRRM reapplied, Tj=125°C It 2 14,520 A sec 8.3 ms, No VRRM reapplied, Tj=25°C It 2 18,300 A sec 10 ms, 100% VRRM reapplied, Tj=125°C It 2 11,250 A sec 10 ms, No VRRM reapplied, Tj=125°C It 2 15,910 A sec It 2 20,000 A sec Tj=25°C, IG=0.5 A, VD=0.67 VDRM (Rated), ITM=300A , Tr < 0.5µs, tp > 6µs di/dt 150 A/µs Peak Gate Power Dissipation Tp < 5 ms, Tj = 125°C PGM 12 W Average Gate Power Dissipation F = 50 Hz, Tj = 125°C PG(AV) 3 W Peak Forward Gate Current Tp < 5 ms, Tj = 125°C IGFM 3 A Tp < 5 ms, Tj = 125°C VGRM 10 V Operating Temperature TJ -40 to +125 °C Storage Temperature Tstg -40 to +125 °C 25 3 44 5 110 in.-Lb. Nm in.-Lb. Nm g 3.88 oz. 2500 3500 V V 10 ms, No VRRM reapplied, Tj=25°C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Peak Reverse Gate Voltage Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together 50 – 60 Hz, 1 minute 50 – 60 Hz, 1 second Vrms Vrms 2 2 2 2 2 Revision Date: 01/26/2002 CD43__90A Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1600 Volts Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Symbol Test Conditions Min. IDRM Up to 1600V, TJ=125°C Max. Units 15 mA IRRM Up to 1600V, TJ=125°C 15 mA V TM / VFM ITM / IFM =300A 1.58 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 16.7% x πIT(AV) to πIT(AV) 0.80 2.40 V mΩ Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 125°C, I = πIT(AV) to ITSM 0.85 2.25 V mΩ Peak On-State Voltage VTM Coefficients, Full Range TJ = 125°C, I = 15% x IT(AV) to ITSM VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt A= B= C= D= 0.7160 2.17E-02 2.20E-03 1.58E-03 dV/dt Linear to 2/3 VDRM Tj=125°C, Gate Open Circuit 500 Turn-Off Time (Typical) t off 40 - 100 Gate Trigger Current IGT TJ = 25°C, IT = 2A Vr = 50V, -dI/dt=10 A/µs Re-Applied dV/dt = 200 V/µs, Linear to 900 V Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load Gate Trigger Voltage VGT Non-Triggering Gate Voltage VGDM Non-Triggering Gate Current V/µs (Typical) µs 270 mA 150 mA 80 mA Tj= -40°C, VD=6V, Resistive Load Tj= 25°C, VD=6V, Resistive Load Tj=125°C, VD=6V, Resistive Load 4.0 Volts 2.5 Volts 1.7 Volts Tj=125°C, VD=VDRM 0.25 Volts IGDM Tj=125°C, VD=VDRM 6 mA Holding Current IH VD=6V, Resistive Load, Gate Open 200 mA Latching Current IL VD=6V, Resistive Load 400 mA Thermal Characteristics Characteristics Symbol Max. Units 0.135 0.270 °C/W °C/W Thermal Resistance, Junction to Case DC Operation RΘJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients ZΘJ-C ZΘJ-C= K1 (1-exp(-t/τ1)) K1 = 6.48 E-3 τ1 = 5.80 E-4 + K2 (1-exp(-t/τ2)) K2 = 6.02 E-2 τ2 = 1.70 E-2 + K3 (1-exp(-t/τ3)) K3 = 1.64 E-1 τ3 = 9.54 E-2 + K4 (1-exp(-t/τ4)) Per Module K4 = 3.94 E-2 τ4 = 3.53 E-1 0.1 °C/W Thermal Resistance, Case to Sink Lubricated RΘC-S Revision Date: 01/26/2002 CD43__90A TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1600 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 °C ) (Junction to Case) 0.30 4.0 0.25 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm - Volts 3.5 3.0 2.5 2.0 1.5 1.0 0.20 0.15 0.10 0.05 0.5 0.00 0.001 0.0 10 100 1000 0.01 0.1 100 (Sinusoidal Waveform) (Sinusoidal Waveform) 125 140 130 180° 120 120 Max. Case Temperature - Tcase -°C Max. Power Dissipation Per SCR - Watts 10 Maximum Allowable Case Temperature Maximum On-State Power Dissipation 120° 110 90° 100 60° 90 30° 80 15° 70 60 50 40 30 180 0 360 CONDUCTION ANGLE 20 115 180 0 110 360 CONDUCTION ANGLE 105 100 15° 95 30° 60° 90° 90 120° 10 180° 85 0 0 10 20 30 40 50 60 70 80 90 0 100 10 20 30 Maximum On-State Power Dissipation 50 60 70 80 90 100 Maximum Allowable Case Temperature (Rectangular Waveform) 180 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 40 Average On-State Current - It(av) - Amperes Average On-State Current - Itm(av) - Amperes (Rectangular Waveform) 125 270° 180° 120° 90° 60° 30° 0 180 120 360° Max. Case Temperature - Tcase -°C Max. Power Dissipation Per SCR - Watts 1 Time - t - Seconds Instantaneous On-State Current - Itm - Amperes 360 CONDUCTION ANGLE 115 180 0 110 360 CONDUCTION ANGLE 105 100 95 30° 90 60° 85 90° 120° 180° 270° 80 360° 75 0 10 20 30 40 50 60 70 80 90 100 110 Average On-State Current - It(av) - Amperes 120 130 140 150 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Average On-State Current - It(av) - Amperes Revision Date: 01/26/2002