MCSO6F family package 3.2×2.5 mm Low Jitter From 10 kHz up to 155 MHz DIMENSIONS Package: Bottom view Recommended Solder Pad: 1,3 3,6 max 1 2 4 3 0,9 ELECTRICAL CHARACTERISTICS AT +25°C 3 1 2 pin 1 E/D pin 2 GND pin 3 Fout pin 4 Vdd All dimensions in mm typical 100% Leadfree, RoHScompliant: SMT Clock oscillator in ceramic package Fundamental quartz mode frequency High shock and vibration resistance Wide temperature range Low aging Ultra low internal MSL Very fast start-up Excellent solderability Swiss made quality Customer specification on request 4 2,8 1,1 max. 1,2 2,2 1,1 1,3 1,3 DESCRIPTION: This SMD oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. APPLICATIONS: - Avionics Airbone equipments Remote control Security application Radio Transceiver Microprocessor clocks The MCSO6's are supplied on trays (208 pcs / tray) For pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min Frequency stability Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 10 years over supply voltage ±5% over load min to max ΔF/F ≤ ± 100 ppm Frequency stability version T Over temperature range (see ordering info) Including: adjustment at +25°C long term aging 1 year over supply voltage ±5% over load min to max ΔF/F ≤ ± 50 ppm Vdd 1.8 / 2.5 / 3.3 V Idd see table 1 HC-MOS compatible 40 / 60 % ≤7 ns Supply voltage ± 5% 1)* Version 1.2V available on request Input current Output signal Symmetry at Vdd/2 Rise & fall time For F=32.768 kHz rise & fall time ≤ 150ns (load 15pf 20% to 80%) Level "0" & "1" <0.4>Vdd-0.5 Start-up time t <5 Load min / max 3/47 Jitter ≤ 20MHz one sigma < 2rms Jitter > 20MHz one sigma < 10rms * 1) C = 47nF ceramic must be connected between GND & Vdd V ms pF ps ps TABLE 1: Idd (Without load) Frequency F=32 kHz F=< 10MHz ≤ 20MHz >20 to 155MHz W=Vdd = 2.5V < 300μA < 2mA < 3mA < 25mA V=Vdd = 3.3V < 1mA < 4mA < 5mA < 30mA STANDARD FREQUENCIES: Frequency «MHz» 4 8 10 40 50 60 12 16 20 24 Other frequencies from 10 kHz up to 155 MHz on request ENVIRONMENTAL CHARACTERISTICS: Storage temp. range -65 to +125°C Vibration resistance (survival) 10 to 2000Hz / 50g Shocks resistance (survival) 5000g / 0.3ms / ½ sine TERMINATIONS AND PROCESSING: Reflow soldering +260°C / 10s max Package Ceramic 3.2 x 2.5 x 1.2mm Lids Ceramic Terminations option T3 on request with tinned Ag/Cu/Sn Pin 1 open → Pin 3 Clock H → Clock L → Low Reaction time ˂ 1μs E/D option 1 on request - No power E/D function (pin 1) before Vdd is setting on - E/D option on request (very low consumption in disable mode). PRODUCT DESCRIPTION AND ORDERING INFORMATION: MCSO6F V T - C 48MHz Z W V = VDD 1.8V = Vdd 2.5V = Vdd 3.3V T blank = ±50ppm = ±100ppm A B C X = 0 to +70°C = -40 to +85°C = -55 to +125°C = custom E/D T3 XXX option 1 E/D enable / disable option 2 blank Au plated T3 = tinned customer spec N° Frequency A unique part number will be generated for each product specification 20xxxx-EA00 xxx pcs (in ESD plastic tray) 200xxx-ML00 xxx pcs (in tape & reel, any quantity) All specifications subject to change without notice. Micro Crystal AG Mühlestrasse 14 CH-2540 Grenchen Switzerland Tel. +41 32 655 82 82 Fax +41 32 655 82 83 [email protected] www.microcrystal.com Version 14/11.2017