AQY41❍EH TESTING GU (General Use)-E Type 1-Channel (Form B) 4-pin Type PhotoMOS RELAYS FEATURES 4.78 .188 6.4 .252 3.2 .126 4.78 .188 6.4 .252 2.9 .114 mm inch Cross section of the normally-closed type of power MOS Passivation membrane Intermediate Source electrode Gate electrode insulating membrane 4 , , 1 3. Compact 4-pin DIP size The device comes in a compact (W)6.4×(L)4.78×(H)3.2mm (W).252×(L).188×(H).126inch, 4-pin DIP size 4. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 5. High sensitivity, low ON resistance Can control a maximum 0.13 A load current with a 5 mA input current. Low ON resistance of 18Ω (AQY410EH). Stable operation because there are no metallic contact parts. 6. Low-level off state leakage current , 1. Low on resistance for normallyclosed type This has been realized thanks to the builtin MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method. Cross section of the normally-closed type of power MOS 2 3 N+ P+ N+ N+ P+ N+ Gate oxidation membrane N– Drain electrode N+ 2. Reinforced insulation 5,000 V type More than 0.4 mm internal insulation distance between inputs and outputs. Conforms to EN41003, EN60950 (reinforced insulation). TYPICAL APPLICATIONS • Modem • Telephone equipment • Security equipment • Sensors TYPES Part No. Output rating* Type AC/DC type I/O isolation voltage Reinforced 5,000 V Load voltage Load current 350 V 400 V 130 mA 120 mA Through hole terminal Surface-mount terminal Tube packing style AQY410EH AQY414EH AQY410EHA AQY414EHA Tape and reel packing style Picked from the Picked from the 1/2-pin side 3/4-pin side AQY410EHAX AQY410EHAZ AQY414EHAX AQY414EHAZ Packing quantity Tube Tape and reel 1 tube contains 100 pcs. 1,000 pcs. 1 batch contains 1,000 pcs. *Indicate the peak AC and DC values. Note: For space reasons, the initial letters of the product number "AQY", the SMD terminal shape indicator "A" and the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature Operating limits Storage 122 Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY410EH (A) AQY414EH (A) 50 mA 3V 1A 75 mW 350 V 0.13 A 0.4 A Remarks f = 100 Hz, Duty factor = 0.1% 400 V 0.12 A 0.3 A 500 mW 550 mW 5,000 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F 100 ms (1 shot), VL= DC Non-condensing at low temperatures AQY41❍EH 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED operate (OFF) current LED reverse (ON) current Input LED dropout voltage Symbol Typical Maximum Minimum Typical Typical Maximum AQY410EH (A) AQY414EH (A) 1.4 mA 1.3 mA IFoff IFon Off state leakage current VF Ron Maximum Typical Maximum Typical Reverse (ON) Transfer char- time* Maximum acteristics Typical I/O capacitance Maximum Initial I/O isolaMinimum tion resistance Operate (OFF) time* IL=Max. 1.3 mA 1.2 mA 1.14 (1.25 V at IF = 50 mA) 1.5 V Maximum Output IL=Max. 3.0 mA 0.4 mA Typical On resistance Condition 18Ω 26Ω 25Ω 35Ω IF = 5 mA IF = 0 mA IL = Max. Within 1 s on time IF = 5 mA VL = Max. 10µA ILeak 1.0 ms Toff 0.8 ms IF = 0 mA-->5 mA IL = Max. 0.2 ms IF = 5 mA-->0 mA IL = Max. 3.0 ms 0.3 ms Ton 1.0 ms 0.8 pF 1.5 pF Ciso f =1MHz VB =0 1,000MΩ Riso 500 V DC Note: Recommendable LED forward current IF = 5 to 10mA. For type of connection, see page 32. *Operate/Reverse time Input Output 10% 90% Toff Ton ■ For Dimensions, see Page 27. ■ For Schematic and Wiring Diagrams, see Page 32. ■ For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 3 and 4; LED current: 0 mA; Load voltage: Max.(DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 AQY410EH 100 AQY414EH 3 40 AQY414EH 30 20 AQY410EH 50 10 0 –40 –20 0 20 40 60 8085 100 Ambient temperature, °C 0 Operate (OFF) time, ms 150 On resistance, Ω Load current, mA 200 2.5 2 1.5 1 0.5 –40 –20 0 20 40 60 8085 Ambient temperature, °C 0 –40 –20 0 20 40 60 80 85 Ambient temperature, °C 123 AQY41❍EH 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) LED operate (OFF) current, mA Reverse (ON) time, ms 0.6 0.4 AQY410EH 0.2 5 LED reverse (ON) off current, mA 5 0.8 4 3 2 1 4 3 2 1 AQY414EH 0 –40 –20 0 0 20 40 60 80 85 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of out-put at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 3 and 4; Ambient temperature: 25°C 77°F 1.4 1.3 1.2 1.0 –40 –20 AQY414EH 0.5 1 1.5 2 2.5 3 –20 Voltage, V –40 –60 –80 –100 –120 –140 50mA 30mA 20mA 10mA 5mA 1.1 0 AQY410EH 0 20 40 60 80 85 Ambient temperature, °C –40 –20 0 20 40 60 80 85 Ambient temperature, °C 9. Off state leakage current Measured portion: between terminals 3 and 4; Ambient temperature: 25°C 77°F Off state leakage current, A 140 120 100 80 60 40 20 –3 –2.5 –2 –1.5 –1 –0.5 Current, mA LED dropout voltage, V 1.5 0 0 20 40 60 80 85 Ambient temperature, °C –40 –20 10 –3 AQY414EH 10 –6 AQY410EH 10 –9 10 –12 0 20 40 60 80 Load voltage, V 100 10. LED forward current vs. Operate (OFF) time characteristics 11. LED forward current vs. Reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 3 2 1 0.4 0.3 0.2 0.1 0 10 20 30 40 50 LED forward current, mA 5/7/2001 124 Output capacitance, pF Reverse (ON) time, ms Operate (OFF) time, ms 4 0 120 0.5 5 60 0 100 80 60 40 20 0 10 20 30 40 50 LED forward current, mA 60 0 0 10 20 30 40 50 Applied voltage, V 60 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd. Go To Online Catalog