Components CCM03-3514 Ccm03 mk ii Datasheet

1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 29
CCM03 MK II
A new range of CCM03 connectors
have been developed to interface with
SIM/SAM cards as defined by GSM1111 and ENV1375-1. The connectors are
available with either hinged covers or
fixed covers and have been designed to
minimize the amount of space needed
for PCB mounting.
Features
Hinged Cover
• Available with 6 or 8 contacts, with or
without PCB locating pegs.
• Available with card presence switch.
• The cover springs open when
unlocked while the card is in place.
• The molding is polarized so that the
cover can only be closed if the card is
correctly inserted.
• The cover can be replaced without
removing the connector from the PCB
Construction
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Stainless steel
Moldings
Spring
Mechanical data
Number of Contacts
Mechanical life, hinged cover
Mechanical life, fixed cover
Durability of inlay, hinged cover
Durability of inlay, fixed cover
Card insertion force
Card extraction force
Contact force
Slide locking force
Vibration
Shock
• Inspection slots allow an electrical test
to be made without opening the cover.
• The overall height of the connector is
only 2.5 mm. The amount of space
needed to mount the connector is just
29.65 mm x 17.2 mm
Electrical data
Insulation resistance
Contact resistance max
Switching current
Dielectric strength
6 or 8
10,000 cycles min
50,000 cycles
10,000 cycles min (see note 1)
5,000 cycles
Hinged cover: 1 N max
Fixed cover: 3 N max
Hinged cover: 1 N max
Fixed cover: 0.80 N min / 3 N max
0.25 N min / 0.50 N max
2 N min / 6 N max
Frequency 10 to 500 Hz. Acceleration 50m/s2
Duration 6 hours - amplitude 0.35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s2 – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Fixed Cover
• Available with 6 or 8 contacts.
• The overall height of the connector is
2.85 mm max. Only 25.5 mm x 17.2
mm of board space is required to
mount the connector.
General
• With tape and reel packaging as
standard, the connectors are designed
to be automatically pick-and-placed.
Environmental data
Operating temperature
Soldering temperature
Damp heat
Salt mist
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is
intended to represent worst case.
• The high temperature thermoplastic
moldings are suited for infrared and
convection soldering processes.
• By using an inlay finish in the contact
area the life of the precious metal is
extended by over 10 times that of
standard gold plating.
• Robustly formed printed circuit tails
allow a co-planarity of ±0.05 mm to
be maintained.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
27
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 30
CCM03 MK II
Ordering code
Part Number
CCM03-3001
CCM03-3002
CCM03-3003
CCM03-3004
CCM03-3005
CCM03-3006
CCM03-3007
CCM03-3008
CCM03-3009
CCM03-3013
CCM03-3504
CCM03-3505
CCM03-3512
CCM03-3514
R102
R102
R102
R102
R701**
R701**
R701**
R701**
R102
R102
R122
R122
R102*
R102
N° of
Contacts
6
6
8
8
6
6
8
8
6
6
8
6
6
6
Cover
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Fixed
Fixed
Hinged
Hinged
PCB Locating
Pegs (mm)
No
Yes
No
Yes
No
Yes
No
Yes
No
No
No
No
No
No
Stand off
(mm)
0.00
0.00
0.00
0.00
1.90
1.90
1.90
1.90
0.00
0.00
0.00
0.00
0.00
0.00
Quantity
per reel
1000
1000
1000
1000
700
700
700
700
1000
1000
1200
1200
1000
1000
Metal
lock
Flat
Flat
Flat
Flat
Bump
Bump
Bump
Bump
Bump
Bump
No
No
Bump
Bump
Switch
lock
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Card Presence
switch
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
*Note: Terminal width = 1 mm - Length = 1.5 mm. (For double reflow).
**Note: On request - Depending on quantities.
Packaging
CCM03 are packaged in accordance with EIA 481-3.
Standard packaging is on tape and reel.
A modification code is added to the part number that indicates reel packaging and the
number of components per reel. There are 5 reels per box.
Reel Diameter
360 mm
Reel Width
24.4 mm
X
344 mm
Y
350 mm
Z
152 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
28
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 31
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3001 (6 contacts)
3002 (6 contacts - PCB locating pegs)
3003 (8 contacts)
3004 (8 contacts - PCB locating pegs)
3009 (6 contacts - lock with bump)
Open
With pegs*
Without pegs
Notes: Coplanarity of soldering surfaces: ± 0.05 mm
*Pegs: Height 0.7 mm and Ø 1 mm
PCB Layout
CCM03-3001 / 3002 / 3009
CCM03-3003 / 3004
1. Mounting pegs only available with CCM03-3002 / 3004
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
29
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 32
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3005 (6 contacts - with stand off 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3005
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
30
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 33
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3006 (6 contacts - with locating pegs 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3006
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
31
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 34
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3007 (8 contacts - with stand off 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3007
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
32
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 35
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3008 (8 contacts - with locating pegs 1.90 mm)
Open
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3008
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
33
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 36
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3013 (6 contacts + Card Detect Switch)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3013
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
34
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 37
CCM03 MK II Fixed Cover
Dimensional Drawings
Fixed cover CCM03-3505 (6 contacts not shown) / CCM03-3504 (8 contacts)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3504
CCM03-3505
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
35
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 38
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3512 (6 contacts)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3512
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
36
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 39
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03-3514 (6 contacts - with switch on metal lock)
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3514
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
37
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 40
CCM03 MK II with Auto Lock cover
A new range of CCM03 connectors
have been developed to interface with
SIM/SAM cards as defined by GSM1111 and ENV1375-1. The connectors are
available with a hinged metallic cover
and have been designed to provide an
easier open/lock function and side card
entry.
Features
• Available with 6 cross contacts which
are designed to give a consistently
reliable normal force over the life of
the connector.
• The hinged metallic cover can
automatically lock by pressure.
• Side entry of the card ensures easier
positioning of the card into the
connector.
• Blade switch version available for
detection card when cover is closed.
• The molding is polarized so that the
cover can only be closed if the card is
correctly inserted.
• Inspection slots allow an electrical test
to be made without opening the cover.
General
• With tape and reel packaging as
standard, the connectors are designed
to be automatically pick-and-placed.
• The moldings are made from high
temperature thermoplastics suited to
infra-red and convection soldering
processes.
Construction
Contacts
Contacts finish
PC tail plating
Molding
Cover
Copper alloy
Gold alloy inlay (Au/Ag/Pd)
Tin lead (2µ min) Sn/Pb
High temp. thermoplastic, UL94V-0
Stainless steel
Mechanical data
Number of Contacts
Mechanical life
Durability of inlay
Contact force
Vibration
6
10,000 cycles min
10,000 cycles min
0.25 N min / 0.50 N max
Frequency 10 to 500 Hz. Acceleration 50m/s2
Duration 6 hours - amplitude 0.35 mm
(0.014) Max electrical discontinuity 1µs
Electrical data
Insulation resistance
Contact resistance
Signal current rating
Dielectric strength
Card detection switch
Switch contact resistance
Dielectric strength switch
Switch current rating
Maximum switch power
Environmental data
Operating temperature
Soldering temperature
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Normally open
100 mΩ max
250 Vrms min
1mA min / 10m A max
0.2 VA
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Damp heat
Salt mist
Ordering Code
Part Number
CCM03-3517
CCM03-3518
N° of
Contacts
6
6
Cover
Hinged
Hinged
Card Presence
Switch
No
Yes
Quantity
per reel
1300
1300
• By using an inlay finish in the contact
area the life of the precious metal is
extended by over 10 times that of
standard gold plating.
• Robustly formed printed circuit tails
allow a co-planarity of ±0.05 mm to
be maintained.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
38
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 41
CCM03 MK II with Auto Lock cover
Dimensional Drawings
Hinged Cover CCM03-3517 (6 contacts)
OPEN
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3517
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
39
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 42
CCM03 MK II with Auto Lock cover
Dimensional Drawings
Hinged Cover CCM03-3518 (6 contacts)
OPEN
Note: Coplanarity of soldering surfaces: ± 0.05 mm
PCB Layout
CCM03-3518
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
40
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 43
CCM03 MK III
Introducing the new CCM03 Series
SIM/SAM Card Connector from ITT
Cannon Switch Products, featuring
an integrated card detection switch.
This connector provides a competitive
advantage to smart card reader device
manufacturers by minimizing the space
usage on the PCB, and features a side
entry to offer convenient card access
without opening the device. The unique
design of this compact-size connector
makes it ideal for telecommunications,
portable electronics, POS terminals
and similar applications, and meets
GSM 11-11 and EMV specifications.
Features
• Unique card-guiding design.
• 6 spoon-shaped, gold-alloyed
contacts resist wear and improve
connectivity.
• Sealed card detection switches
reduce connectivity problems caused
by dust or moisture.
• Switch design detects and holds the
card while providing firm contact.
• Unique side entry design offers card
access without opening the device.
• Stainless steel cover and UL 94VO
high-temperature thermoplastic
insulator.
Construction
Insulator
Contacts
Contact finish
PC Tail plating
High temperature thermoplastic UL 94V.0
Copper Alloy
Gold Alloy Inlay (Au / Ag / Pd)
Tin lead (2 µm min) Sn / Pb
Mechanical data
Mechanical life
Precious metal
Contact force
10,000 cycles minimum
5000 cycles minimum (see note 1)
0.25N min / 0.5N max
Electrical data
Insulation resistance
Contact resistance max
Switching current
Dielectric strength
1000 MΩ min
100 mΩ max
10 µA min / 1 A max
500 Vrms min
Environmental data
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature
IEC 512 test number 11f (96 hours)
IEC 512 test number 11c (10 days)
Salt mist
Damp heat
Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is
intended to represent worst case.
Ordering Code
Part Number
CCM03-3752 R102
CCM03-3753 R102
CCM03-3754 R102
CCM03-3757 R102
CCM03-3758 R102
N° of
Contacts
6
6
6
6
6
Cover
Without chamfer
With chamfer
With chamfer
With chamfer
With chamfer
Switch Testing
Hole
Yes
No
Yes
No
Yes
Ground
Terminal
No
No
No
Yes
Yes
Quantity
per reel
1000
1000
1000
1000
1000
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
41
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 44
CCM03 MK III
Dimensional Drawings
CCM03 – 3753 / 3757
CCM03 – 3752 / 3754 / 3758
PCB Layout
CCM03 – 3752 / 3753 / 3754
CCM03 – 3757 / 3758
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
42
Similar pages