D41F series interface relays • miniature slim DIN rail power relay • up to 6A /250V AC rating • LED indication • Screw or spring clamp terminals • Optional accessories • RoHS Compliant * Standard is light gray for socket, other colours to special order only. E305752 Contacts Contact number & arrangement SPDT ( 1 C/O) Contact material AgSnO2 Max. switching voltage AC/DC 440VAC / 125VDC Min. switching current / voltage Rated load 5mA / 5VDC Resistive 6A 250VAC/30VDC Max. switching power 1500VA / 180W Max. inrush current 15A for 2.5ms Initial resistance 100mΩ, max. at 1A/6VDC Coil (Input) Rated voltage AC or DC 12 ~ 24V, 48 ~ 60V, 110 ~ 125V, 220 ~ 240V AC/DC DC only 6 ~ 24V DC Operating range of supply voltage See coil table 1 Insulation Insulation resistance ≤ 1000MΩ at 500VDC, 50%RH Dielectric strength coil to contact 4000Vrms, 1min contact to contact 1000Vrms, 1min General Data Operating time (typical) mS ≤ 7ms Release time (typical) mS ≤ 15ms Electrical Life ops ≥ 3.0 x 104 (NO) / ≥ 1.0 x 104 (NC) at full rated load, @ 85°C Mechanical life ops ≥ 1 x 107 Dimensions L x W x H 88.3 x 6.3 x 70.9 (refer to dimension drawings, Fig 1, for details) Weight approx 28g (socket including relay) Ambient temperature storage -40 to 85°C operating 6 ~ 12VDC, 12 ~ 24V AC/DC, 48 ~ 60V AC/DC: -40 to 70°C 110 ~ 125V, 220 ~ 230V AC/DC: -40 to 55°C Humidity 5% to 85% RH Shock resistance 49ms2 (functional) / 980ms2 (destructive) Vibration resistance 10...55Hz, 1mm DA Page 1 of 3 Ref: D41F 102115JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 Specifications are subject to change without notice. E&OE. D41F series interface relays Coil data Table 1 Coil Voltage Code Nominal Control Voltage Relay Coil Voltage 1 12 ~ 24VAC/DC 12VDC 2 48 ~ 60VAC/DC 48VDC 3 110 ~ 125VAC/DC 60VDC 4 220 ~ 230VAC/DC 60VDC 5 6 ~ 24VDC 5VDC Input Polarity Screw Torque (D41F-1Z-C2 only) Stripped wire length 0.5Nm 7mm None A1 + / A2 - Operating relays below or above the nominal voltage may prove detrimental to performance. Ordering codes Table 2 Relay & Socket Code D Movable ejector: Easy replacement of relay 4 1 Contact F - 1 Z - Contact Style 1Z - Coil code Socket style - See Table 1 SPDT (1 Form Z) Socket style C2 - Screw terminals C4 - Spring clamp terminals Green LED Diode indicates operate status of relay Overall dimensions 58.2 79.7 Fig. 1 35 6.1 101.6 Page 2 of 3 Ref: D41F 102115JHM www.aecsensors.com Dimensions in mm Sales Department Tel: (888) 847-6552 Specifications are subject to change without notice. E&OE. D41F series interface relays - accessories D41F-AR Adaptor Fig.2 Technical data Rated current (per signal path) 1A Minimum required supply power 3W Nominal voltage (Un) 24VDC Operating range (0.8~1.1)Un Control logic Positive switching (to A) Power supply status indication Green LED Ambient temperature range -40°C ~ 70°C Terminals for 24V control logic Type of connector 14 pole, according to IEC 60603-13 Terminals for 24V Power supply Wire strip length 9.5mm Screw torque 0.5Nm Max. wire size solid wire stranded wire 1 x 4/2 x 1.5mm2 1 x 12/2 x 16AWG 1 x 2.5/2 x 1.5mm2 1 x 14/2 x 16AWG Fig. 3 D41F-J-Blue / Red / Black Jumper Ordering Code: D41F-J - Red or D41F-J- Blue or D41F-J-Black Fig. 4 D41F-S Separator D41F-M White Marker Tab Page 3 of 3 Ref: D41F 102115JHM D41F-M1 White Marker Tab (bulk for engraving) Fig. 5 American Electronic Components Inc., 1101 Lafayette St, Elkhart, Indiana IN46516 www.aecsensors.com Sales Department Tel: (888) 847-6552 Specifications are subject to change without notice. E&OE.