MPSA05, MPSA06, MPSA55, MPSA56 MPSA06 and MPSA56 are Preferred Devices Amplifier Transistors Voltage and Current are Negative for PNP Transistors http://onsemi.com PNP NPN NPN MPSA05, MPSA06 PNP MPSA55, MPSA56 COLLECTOR 3 COLLECTOR 3 2 BASE 2 BASE STYLE 1 MPSA05, MPSA06 MARKING DIAGRAM 1 EMITTER 1 EMITTER TO−92 CASE 29 STYLE 1 STYLE 1 MPSA55, MPSA56 MPS Axxx YWW MAXIMUM RATINGS Rating Symbol Collector −Emitter Voltage MPSA05, MPSA55 MPSA06, MPSA56 VCEO Collector −Base Voltage MPSA05, MPSA55 MPSA06, MPSA56 VCBO Emitter −Base Voltage VEBO 4.0 Vdc Collector Current − Continuous IC 500 mAdc Total Device Dissipation @ TA = 25°C Derate above 25°C PD 625 5.0 mW mW/°C Total Device Dissipation @ TC = 25°C Derate above 25°C PD 1.5 12 Watts mW/°C −55 to +150 °C Operating and Storage Junction Temperature Range Value Unit Vdc 2 3 60 80 TJ, Tstg Device Symbol Max Unit Thermal Resistance, Junction to Ambient RθJA (Note 1.) 200 °C/W Thermal Resistance, Junction to Case RθJC 83.3 °C/W 1. RJA is measured with the device soldered into a typical printed circuit board. = Specific Device Code = 05, 06, 55 or 56 = Year = Work Week ORDERING INFORMATION Vdc 60 80 THERMAL CHARACTERISTICS Characteristic MPSA xxx Y WW 1 Package Shipping MPSA05 TO−92 5000 Units/Box MPSA05RLRA TO−92 2000/Tape & Reel MPSA05RLRM TO−92 2000/Ammo Pack MPSA06 TO−92 5000 Units/Box MPSA06RLRA TO−92 2000/Tape & Reel MPSA06RLRM TO−92 2000/Ammo Pack MPSA06RLRP TO−92 2000/Ammo Pack MPSA55 TO−92 5000 Units/Box MPSA55RLRA TO−92 2000/Tape & Reel MPSA56 TO−92 5000 Units/Box MPSA56RLRA TO−92 2000/Tape & Reel MPSA56RLRM TO−92 2000/Ammo Pack MPSA56RLRP TO−92 2000/Ammo Pack Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2001 October, 2001 − Rev. 1 1 Publication Order Number: MPSA05/D MPSA05, MPSA06, MPSA55, MPSA56 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit 60 80 − − V(BR)EBO 4.0 − Vdc ICES − 0.1 µAdc − − 0.1 0.1 100 100 − − OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (Note 2.) (IC = 1.0 mAdc, IB = 0) V(BR)CEO Vdc MPSA05, MPSA55 MPSA06, MPSA56 Emitter −Base Breakdown Voltage (IE = 100 µAdc, IC = 0) Collector Cutoff Current (VCE = 60 Vdc, IB = 0) Collector Cutoff Current (VCB = 60 Vdc, IE = 0) (VCB = 80 Vdc, IE = 0) µAdc ICBO MPSA05, MPSA55 MPSA06, MPSA56 ON CHARACTERISTICS DC Current Gain (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) hFE − Collector −Emitter Saturation Voltage (IC = 100 mAdc, IB = 10 mAdc) VCE(sat) − 0.25 Vdc Base−Emitter On Voltage (IC = 100 mAdc, VCE = 1.0 Vdc) VBE(on) − 1.2 Vdc 100 − 50 − SMALL−SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (Note 3.) (IC = 10 mA, VCE = 2.0 V, f = 100 MHz) fT MHz MPSA05 MPSA06 MPSA55 MPSA56 (IC = 100 mAdc, VCE = 1.0 Vdc, f = 100 MHz) 2. Pulse Test: Pulse Width 300 s, Duty Cycle 2%. 3. fT is defined as the frequency at which |hfe| extrapolates to unity. TURN−ON TIME 5.0 s 100 VCC +VBB +40 V +40 V RL 100 OUTPUT +10 V tr = 3.0 ns RB Vin * CS 6.0 pF 5.0 F RL OUTPUT RB Vin 0 TURN−OFF TIME VCC −1.0 V * CS 6.0 pF 5.0 F 100 100 5.0 s tr = 3.0 ns *Total Shunt Capacitance of Test Jig and Connectors For PNP Test Circuits, Reverse All Voltage Polarities Figure 1. Switching Time Test Circuits http://onsemi.com 2 MPSA05, MPSA06, MPSA55, MPSA56 PNP f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz) f T , CURRENT−GAIN − BANDWIDTH PRODUCT (MHz) NPN 300 200 VCE = 2.0 V TJ = 25°C 200 100 100 70 50 30 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 −5.0 −7.0 −10 −20 −30 −50 −70 −100 −200 100 TJ = 25°C TJ = 25°C 70 C, CAPACITANCE (pF) 50 Cibo 10 8.0 Cobo 6.0 4.0 0.1 0.2 0.5 1.0 2.0 5.0 10 Cibo 30 20 Cobo 10 7.0 20 50 5.0 −0.1 −0.2 100 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 4. MPSA05/06 Capacitance Figure 5. MPSA55/56 Capacitance 1.0 k 700 500 1.0 k 700 500 ts 300 200 100 70 50 tf VCC = 40 V IC/IB = 10 IB1 = IB2 TJ = 25°C 5.0 7.0 10 50 70 100 100 70 50 20 td @ VBE(off) = 0.5 V 30 200 30 tr 20 ts 300 t, TIME (ns) C, CAPACITANCE (pF) 20 −2.0 −3.0 Figure 3. MPSA55/56 Current−Gain — Bandwidth Product 20 10 30 Figure 2. MPSA05/06 Current−Gain — Bandwidth Product 40 20 50 IC, COLLECTOR CURRENT (mA) 60 30 70 IC, COLLECTOR CURRENT (mA) 80 t, TIME (ns) VCE = −2.0 V TJ = 25°C 200 300 tf VCC = −40 V IC/IB = 10 IB1 = IB2 TJ = 25°C 10 −5.0 −7.0 −10 500 td @ VBE(off) = −0.5 V −20 −30 −50 −70 −100 tr −200 −300 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 6. MPSA05/06 Switching Time Figure 7. MPSA55/56 Switching Time http://onsemi.com 3 −500 MPSA05, MPSA06, MPSA55, MPSA56 NPN PNP −1.0 k −700 −500 100 s 1.0 ms 300 20 10 1.0 MPSA05 2.0 3.0 5.0 7.0 10 TA = 25°C −100 −70 −50 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 30 1.0 s TC = 25°C −200 TA = 25°C 100 70 50 100 s 1.0 ms −300 1.0 s TC = 25°C 200 I C , COLLECTOR CURRENT (mA) I C , COLLECTOR CURRENT (mA) 1.0 k 700 500 MPSA06 20 50 30 −20 −10 70 100 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT −30 MPSA55 −1.0 −2.0 −3.0 −5.0 −7.0 −10 MPSA56 −20 −30 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) Figure 8. MPSA05/06 Active−Region Safe Operating Area Figure 9. MPSA55/56 Active−Region Safe Operating Area 400 400 TJ = 125°C TJ = 125°C VCE = −1.0 V 25°C −55°C 100 80 60 1.0 1.0 2.0 3.0 5.0 10 20 30 50 100 200 25°C −55°C 100 80 60 40 −0.5 −1.0 −2.0 200 300 500 −20 −50 −100 −200 IC, COLLECTOR CURRENT (mA) Figure 10. MPSA05/06 DC Current Gain Figure 11. MPSA55/56 DC Current Gain −1.0 TJ = 25°C VBE(on) @ VCE = 1.0 V 0.4 0.2 −500 TJ = 25°C −0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(sat) @ IC/IB = 10 −0.6 VBE(on) @ VCE = −1.0 V −0.4 −0.2 VCE(sat) @ IC/IB = 10 0 0.5 −5.0 −10 IC, COLLECTOR CURRENT (mA) 0.8 V, VOLTAGE (VOLTS) h FE, DC CURRENT GAIN 200 V, VOLTAGE (VOLTS) h FE , DC CURRENT GAIN VCE = 1.0 V 40 0.5 −50 −70 −100 VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS) 1.0 2.0 5.0 VCE(sat) @ IC/IB = 10 10 20 50 100 200 0 −0.5 500 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 12. MPSA05/06 “ON” Voltages Figure 13. MPSA55/56 “ON” Voltages http://onsemi.com 4 −500 MPSA05, MPSA06, MPSA55, MPSA56 PNP VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) NPN 1.0 TJ = 25°C 0.8 IC = 250 mA IC = 100 mA IC = 50 mA IC = 500 mA 0.6 0.4 IC = 10 mA 0.2 0 0.05 0.2 0.1 0.5 2.0 1.0 5.0 10 20 IC = −250 mA IC = −100 mA IC = −50 mA IC = −500 mA −0.6 −0.4 IC = −10 mA −0.2 0 −0.05 −0.1 −0.2 −0.5 −1.0 −2.0 −5.0 −10 −20 IB, BASE CURRENT (mA) Figure 14. MPSA05/06 Collector Saturation Region Figure 15. MPSA55/56 Collector Saturation Region R VB , TEMPERATURE COEFFICIENT (mV/° C) R VB , TEMPERATURE COEFFICIENT (mV/ °C) −1.6 RVB for VBE −2.0 −2.4 −2.8 0.5 r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE −0.8 IB, BASE CURRENT (mA) −1.2 1.0 2.0 5.0 10 20 50 100 200 500 −50 −0.8 −1.2 −1.6 RVB for VBE −2.0 −2.4 −2.8 −0.5 −1.0 −2.0 −5.0 −10 −20 −50 −100 −200 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 16. MPSA05/06 Base−Emitter Temperature Coefficient Figure 17. MPSA55/56 Base−Emitter Temperature Coefficient −500 D = 0.5 0.3 0.2 0.2 0.1 0.05 0.1 0.07 0.05 TJ = 25°C 50 −0.8 1.0 0.7 0.5 −1.0 0.02 SINGLE PULSE ZθJC(t) = r(t) • RθJC TJ(pk) − TC = P(pk) ZθJC(t) ZθJA(t) = r(t) • RθJA TJ(pk) − TA = P(pk) ZθJA(t) D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 (SEE AN469) P(pk) 0.01 t1 SINGLE PULSE 0.03 t2 0.02 DUTY CYCLE, D = t1/t2 0.01 1.0 2.0 5.0 10 20 50 100 200 500 1.0 k 2.0 k 5.0 k 10 k t, TIME (ms) Figure 18. MPSA05, MPSA06, MPSA55 and MPSA56 Thermal Response http://onsemi.com 5 20 k 50 k 100 k MPSA05, MPSA06, MPSA55, MPSA56 PACKAGE DIMENSIONS TO−92 TO−226AA CASE 29−11 ISSUE AL A B R P NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. L SEATING PLANE K DIM A B C D G H J K L N P R V D X X G J H V C SECTION X−X 1 N N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR http://onsemi.com 6 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− STYLE 14: PIN 1. EMITTER 2. COLLECTOR 3. BASE MPSA05, MPSA06, MPSA55, MPSA56 Notes http://onsemi.com 7 MPSA05, MPSA06, MPSA55, MPSA56 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] JAPAN: ON Semiconductor, Japan Customer Focus Center 4−32−1 Nishi−Gotanda, Shinagawa−ku, Tokyo, Japan 141−0031 Phone: 81−3−5740−2700 Email: [email protected] ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800−282−9855 Toll Free USA/Canada http://onsemi.com 8 MPSA05/D