Kingbright APBDA3020SURKCGKC 3.0x2.0mm right angle smd led Datasheet

3.0x2.0mm RIGHT ANGLE SMD LED
Part Number: APBDA3020SURKCGKC
PRELIMINARY SPEC
Hyper Red
Green
Features
Description
z
3.0mmx2.0mm SMT LED,2.8mm THICKNESS.
z
LOW POWER CONSUMPTION.
z
VARIOUS COLORS AND LENS TYPES AVAILABLE.
z
IDEAL FOR BACK LIGHT AND INDICATOR
z
PACKAGE : 2000PCS / REEL.
z
WHEN SOLDERED IN THE SIDEVIEW CONFIGURATION,
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaAlP on
GaAs substrate Light Emitting Diode.
THE MAXIMUM SHEAR TOLERANCE OF THE EPOXY
LENS IS 300G.
●MOISTURE SENSITIVITY LEVEL : LEVEL 3.
●RoHS COMPLIANT
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH1375
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: APR/29/2007
DRAWN: Y.L.LI
PAGE: 1 OF 6
ERP: 1203006404
Selection Guide
Part No.
Dice
Lens Type
Hyper Red (InGaAlP)
APBDA3020SURKCGKC
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
650
900
180
320
2θ1/2
15°
WATER CLEAR
Green (InGaAlP)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Hyper Red
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
650
574
nm
IF=20mA
Hyper Red
Green
635
570
nm
IF=20mA
Spectral Line Half-width
Hyper Red
Green
28
20
nm
IF=20mA
C
Capacitance
Hyper Red
Green
35
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
Green
1.95
2.1
2.5
2.5
V
IF=20mA
IR
Reverse Current
Hyper Red
Green
10
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Green
Units
Power dissipation
75
75
mW
DC Forward Current
30
30
mA
Peak Forward Current [1]
185
150
mA
Reverse Voltage
5
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
V
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH1375
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: APR/29/2007
DRAWN: Y.L.LI
PAGE: 2 OF 6
ERP: 1203006404
APBDA3020SURKCGKC
Hyper Red
SPEC NO: DSAH1375
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: APR/29/2007
DRAWN: Y.L.LI
PAGE: 3 OF 6
ERP: 1203006404
Green
SPEC NO: DSAH1375
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: APR/29/2007
DRAWN: Y.L.LI
PAGE: 4 OF 6
ERP: 1203006404
APBDA3020SURKCGKC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH1375
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: APR/29/2007
DRAWN: Y.L.LI
PAGE: 5 OF 6
ERP: 1203006404
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAH1375
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
APBDA3020SURKCGKC
DATE: APR/29/2007
DRAWN: Y.L.LI
PAGE: 6 OF 6
ERP: 1203006404
Similar pages