M320x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, VCXO Product Features Featuring QiK ChipTM Technology Superior Jitter Performance (comparable to SAW based) APR of ±50 or ±100ppm over industrial temperature range Frequencies from 150 MHz to 1.4 GHz Designed for a short 2 week cycle time QiK Chip™ Product Description The M320x series of VCXO’s is designed with a hermetically sealed high precision AT cut quartz crystal, combined with our QiK ChipTM technology. This combination provides an industry setting 0.35 ps RMS jitter performance and excellent Phase Noise for your demanding circuit. The M310x is available in LVPECL, LVDS, or CML output and can be built to a variety of power requirements, 3.3, 2.5, and 1.8V. Tight thermal stability performance, broad frequency range, an industry standard 9x14mm package, and the ability to build and provide product in approximately 2 weeks, gives the designer a quick, solid foundation to build a solution with. Product Applications Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192 Wireless base stations / WLAN / Gigabit Ethernet xDSL, Network Communications Avionic Flight Controls Military Communications Clock and Data Recovery Low Jitter Clock Generation Product Ordering Information MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. Revision: 8-22-08 M320x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, VCXO Performance Characteristics MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 2 M320x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, VCXO Phase Noise Plot Output Waveform Output Waveform: LVDS/CML/PECL MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 3 M320x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, VCXO Product Dimension & Pinout Information MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 4 M320x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, VCXO Handling Information Although protection circuitry has been designed into the M320x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Quality Parameters Part Marking Guide Line 1: Model Number Line 2: Frequency Line 3: Date Code Line 4: Pin 1 Indicator / MtronPTI MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 5 M320x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, VCXO Tape & Reel Specifications (all measurements are in mm) M320x A B C D E 10.00 14.20 1.50 11.50 4.85 F G H I J L P Q R S T 4.00 16.00 2.00 1.75 24.00 0.35 100.00 330.00 20.20 13.00 2.00 Standard Tape and Reel: 500 parts per reel Product Revision Table Date 7/20/07 Revision A PCN Number Details of Revision 10118 IC Revision to improve phase noise and electrical performance MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 6 M320x Series 9x14 mm, 3.3/2.5/1.8 Volt, LVPECL/LVDS/CML, VCXO Maximum Soldering Conditions Solder Conditions Note: Exceeding these limits may damage the device. Typical Test Circuit & Load Circuit Diagrams For custom products or additional specifications contact our sales team at 800.762.8800 (toll free) or 605.665.9321 For more information on this product visit the MtronPTI website at www.mtronpti.com 7