Lyontek LY62256DL-35SLIT 32k x 8 bit low power cmos sram Datasheet

®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
REVISION HISTORY
Revision
Rev. 1.0.
Rev. 2.0.
Rev. 2.1.
Rev. 2.2
Rev. 2.3
Rev. 2.4
Rev. 2.5
Rev. 2.6
Rev. 2.7
Rev. 2.8
Rev. 2.9
Description
Initial Issue
Revised Vcc Range(Vcc=4.5~5.5V => 2.7~5.5V)
Revised ISB1
Adding PKG type : skinny P-DIP
Revised VIH(min)=2.4V, VIL(max)=0.6V
Revised VIH(min)=2.4V, VIL(max)=0.6V (VCC=2.7~3.6V)
VIH(min)=2.4V, VIL(max)=0.8V (VCC=4.5~5.5V)
Revised STSOP Package Outline Dimension
Added SL grade
Added ISB1/IDR values when TA = 25℃ and TA = 40℃
Revised FEATURES & ORDERING INFORMATION Lead
free and green package available to Green package available
Added packing type in ORDERING INFORMATION
Revised ISB1(MAX)
Revised VTERM to VT1 and VT2
Revised Test Condition of ISB1/IDR
Deleted TSOLDER in ABSOLUTE MAXIMUN RATINGS
Revised PACKAGE OUTLINE DIMENSION in page 8 & 9
Revised PACKAGE OUTLINE DIMENSION in page 10
Revised ORDERING INFORMATION in page 12
Revised PACKAGE OUTLINE DIMENSION in page 9
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
0
Issue Date
Jul.25.2004
May.4.2005
May.13.2005
Aug.29.2005
Feb.24.2006
Jul.31.2006
Mar.26.2008
Mar.30.2009
Dec.18.2009
May.7.2010
Aug.25.2010
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
FEATURES
GENERAL DESCRIPTION
„ Fast access time : 35/55/70ns
„ Low power consumption:
Operating current : 20/15/10mA (TYP.)
Standby current : 1μA (TYP.)
„ Single 2.7~5.5V power supply
„ All inputs and outputs TTL compatible
„ Fully static operation
„ Tri-state output
„ Data retention voltage : 1.5V (MIN.)
„ Green package available
„ Package : 28-pin 600 mil PDIP
28-pin 330 mil SOP
28-pin 8mm x 13.4mm STSOP
28-pin 300 mil Skinny P-DIP
The LY62256 is a 262,144-bit low power CMOS
static random access memory organized as 32,768
words by 8 bits. It is fabricated using very high
performance, high reliability CMOS technology. Its
standby current is stable within the range of
operating temperature.
The LY62256 is well designed for low power
application, and particularly well suited for battery
back-up nonvolatile memory application.
The LY62256 operates from a single power
supply of 2.7~5.5V and all inputs and outputs are
fully TTL compatible
PRODUCT FAMILY
Product
Family
LY62256
LY62256(E)
LY62256(I)
Operating
Temperature
0 ~ 70℃
-20 ~ 80℃
-40 ~ 85℃
Vcc Range
Speed
2.7 ~ 5.5V
2.7 ~ 5.5V
2.7 ~ 5.5V
35/55/70ns
35/55/70ns
35/55/70ns
FUNCTIONAL BLOCK DIAGRAM
PIN DESCRIPTION
Vcc
Vss
A0-A14
DECODER
DQ0-DQ7
I/O DATA
CIRCUIT
CE#
WE#
OE#
CONTROL
CIRCUIT
Power Dissipation
Standby(ISB1,TYP.) Operating(Icc,TYP.)
1µA
20/15/10mA
1µA
20/15/10mA
1µA
20/15/10mA
32Kx8
MEMORY ARRAY
SYMBOL
DESCRIPTION
A0 - A14
Address Inputs
DQ0 – DQ7
Data Inputs/Outputs
CE#
Chip Enable Input
WE#
Write Enable Input
OE#
Output Enable Input
VCC
Power Supply
VSS
Ground
COLUMN I/O
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
1
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
PIN CONFIGURATION
1
28
Vcc
A12
2
27
WE#
A7
3
26
A13
A6
4
25
A8
A5
5
24
A9
A4
6
A3
7
A2
8
A1
9
LY62256
A14
23
A11
22
OE#
21
A10
20
CE#
A0
10
19
DQ7
DQ0
11
18
DQ6
DQ1
12
17
DQ5
DQ2
13
16
DQ4
Vss
14
15
DQ3
OE#
A11
A9
A8
A13
WE#
Vcc
A14
A12
A7
A6
A5
A4
A3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
LY62256
28
27
26
25
24
23
22
21
20
19
18
17
16
15
A10
CE#
DQ7
DQ6
DQ5
DQ4
DQ3
Vss
DQ2
DQ1
DQ0
A0
A1
A2
STSOP
Skinny P-DIP/P-DIP/SOP
ABSOLUTE MAXIMUN RATINGS*
PARAMETER
Voltage on VCC relative to VSS
Voltage on any other pin relative to VSS
SYMBOL
VT1
VT2
Operating Temperature
TA
Storage Temperature
Power Dissipation
DC Output Current
TSTG
PD
IOUT
RATING
-0.5 to 6.5
-0.5 to VCC+0.5
0 to 70(C grade)
-20 to 80(E grade)
-40 to 85(I grade)
-65 to 150
1
50
UNIT
V
V
℃
℃
W
mA
*Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress
rating only and functional operation of the device or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to the absolute maximum rating conditions for extended period may affect device reliability.
TRUTH TABLE
MODE
Standby
Output Disable
Read
Write
Note:
CE#
H
L
L
L
OE#
X
H
L
X
WE#
X
H
H
L
I/O OPERATION
High-Z
High-Z
DOUT
DIN
H = VIH, L = VIL, X = Don't care.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
2
SUPPLY CURRENT
ISB,ISB1
ICC,ICC1
ICC,ICC1
ICC,ICC1
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
DC ELECTRICAL CHARACTERISTICS
PARAMETER
Supply Voltage
Input High Voltage
SYMBOL
VCC
*1
VIH
Input Low Voltage
Input Leakage Current
Output Leakage
Current
Output High Voltage
Output Low Voltage
*2
VIL
ILI
ILO
VOH
VOL
ICC
Average Operating
Power supply Current
ICC1
ISB
Standby Power
Supply Current
ISB1
TEST CONDITION
VCC=2.7~3.6V
VCC=4.5~5.5V
VCC ≧ VIN ≧ VSS
VCC ≧ VOUT ≧ VSS,
Output Disabled
IOH = -1mA
IOL = 2mA
-35
Cycle time = Min.
CE# = VIL , II/O = 0mA
-55
Other pins at VIL or VIH -70
Cycle time = 1µs
CE#≦0.2V and II/O = 0mA
other pins at 0.2V or VCC-0.2V
CE# = VIH, other pins at VIL or VIH
LL
LLE/LLI
*5
SL
CE# ≧VCC-0.2V
25℃
*5
SLE
Others at 0.2V or
*5
40℃
SLI
VCC - 0.2V
SL
SLE/SLI
MIN.
2.7
2.4
- 0.5
- 0.5
-1
TYP.
3.3
-
*4
MAX.
5.5
VCC+0.5
0.6
0.8
1
UNIT
V
V
V
V
µA
-1
-
1
µA
2.4
-
3.0
20
15
10
0.4
50
45
40
V
V
mA
mA
mA
-
3
10
mA
-
1
1
1
3
20
30
mA
µA
µA
-
1
3
µA
-
1.5
4
µA
-
1
1
10
20
µA
µA
Notes:
1. VIH(max) = VCC + 3.0V for pulse width less than 10ns.
2. VIL(min) = VSS - 3.0V for pulse width less than 10ns.
3. Over/Undershoot specifications are characterized, not 100% tested.
4. Typical values are included for reference only and are not guaranteed or tested.
Typical valued are measured at VCC = VCC(TYP.) and TA = 25℃
5. This parameter is measured at VCC = 3.0V
CAPACITANCE (TA = 25℃, f = 1.0MHz)
PARAMETER
Input Capacitance
Input/Output Capacitance
SYMBOL
CIN
CI/O
MIN.
-
MAX
6
8
Note : These parameters are guaranteed by device characterization, but not production tested.
AC TEST CONDITIONS
Input Pulse Levels
Input Rise and Fall Times
Input and Output Timing Reference Levels
Output Load
0.2V to VCC - 0.2V
3ns
1.5V
CL = 50pF + 1TTL, IOH/IOL = -1mA/2mA
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
3
UNIT
pF
pF
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
AC ELECTRICAL CHARACTERISTICS
(1) READ CYCLE
PARAMETER
Read Cycle Time
Address Access Time
Chip Enable Access Time
Output Enable Access Time
Chip Enable to Output in Low-Z
Output Enable to Output in Low-Z
Chip Disable to Output in High-Z
Output Disable to Output in High-Z
Output Hold from Address Change
(2) WRITE CYCLE
PARAMETER
Write Cycle Time
Address Valid to End of Write
Chip Enable to End of Write
Address Set-up Time
Write Pulse Width
Write Recovery Time
Data to Write Time Overlap
Data Hold from End of Write Time
Output Active from End of Write
Write to Output in High-Z
SYM.
tRC
tAA
tACE
tOE
tCLZ*
tOLZ*
tCHZ*
tOHZ*
tOH
SYM.
tWC
tAW
tCW
tAS
tWP
tWR
tDW
tDH
tOW*
tWHZ*
LY62256-35
MIN.
MAX.
35
35
35
25
10
5
15
15
10
-
LY62256-55
MIN.
MAX.
55
55
55
30
10
5
20
20
10
-
LY62256-70
MIN.
MAX.
70
70
70
35
10
5
25
25
10
-
UNIT
LY62256-35
MIN.
MAX.
35
30
30
0
25
0
20
0
5
15
LY62256-55
MIN.
MAX.
55
50
50
0
45
0
25
0
5
20
LY62256-70
MIN.
MAX.
70
60
60
0
55
0
30
0
5
25
UNIT
*These parameters are guaranteed by device characterization, but not production tested.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
4
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
TIMING WAVEFORMS
READ CYCLE 1 (Address Controlled) (1,2)
tRC
Address
tAA
Dout
tOH
Previous Data Valid
Data Valid
READ CYCLE 2 (CE# and OE# Controlled) (1,3,4,5)
tRC
Address
tAA
CE#
tACE
OE#
tOE
tOH
tOHZ
tCHZ
tOLZ
tCLZ
Dout
High-Z
Data Valid
Notes :
1.WE# is high for read cycle.
2.Device is continuously selected OE# = low, CE# = low.
3.Address must be valid prior to or coincident with CE# = low,; otherwise tAA is the limiting parameter.
4.tCLZ, tOLZ, tCHZ and tOHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state.
5.At any given temperature and voltage condition, tCHZ is less than tCLZ , tOHZ is less than tOLZ.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
5
High-Z
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
WRITE CYCLE 1 (WE# Controlled) (1,2,3,5,6)
tWC
Address
tAW
CE#
tCW
tAS
tWP
tWR
WE#
tWHZ
Dout
TOW
High-Z
(4)
tDW
(4)
tDH
Data Valid
Din
WRITE CYCLE 2 (CE# Controlled) (1,2,5,6)
tWC
Address
tAW
CE#
tAS
tWR
tCW
tWP
WE#
tWHZ
Dout
High-Z
(4)
tDW
tDH
Data Valid
Din
Notes :
1.WE#, CE# must be high during all address transitions.
2.A write occurs during the overlap of a low CE#, low WE#.
3.During a WE# controlled write cycle with OE# low, tWP must be greater than tWHZ + tDW to allow the drivers to turn off and data to be
placed on the bus.
4.During this period, I/O pins are in the output state, and input signals must not be applied.
5.If the CE# low transition occurs simultaneously with or after WE# low transition, the outputs remain in a high impedance state.
6.tOW and tWHZ are specified with CL = 5pF. Transition is measured ±500mV from steady state.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
6
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
DATA RETENTION CHARACTERISTICS
PARAMETER
VCC for Data Retention
Data Retention Current
Chip Disable to Data
Retention Time
Recovery Time
tRC* = Read Cycle Time
SYMBOL
TEST CONDITION
VDR
CE# ≧ VCC - 0.2V
LL/LLE/LLI
SL
25℃
VCC = 1.5V
SLE
CE# ≧ VCC - 0.2V
IDR
SLI 40℃
Others at 0.2V or VCC-0.2V
SL
SLE/SLI
See Data Retention
tCDR
Waveforms (below)
tR
MIN.
1.5
-
TYP.
0.5
MAX.
5.5
20
-
0.5
2
-
1
3
-
0.5
0.5
8
15
µA
µA
µA
0
-
-
ns
tRC*
-
-
ns
DATA RETENTION WAVEFORM
VDR ≧ 1.5V
Vcc
Vcc(min.)
Vcc(min.)
tCDR
CE#
VIH
tR
CE# ≧ Vcc-0.2V
VIH
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
7
UNIT
V
µA
µA
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
PACKAGE OUTLINE DIMENSION
28 pin 600 mil PDIP Package Outline Dimension
UNIT
SYM.
A1
A2
B
B1
c
D
E
E1
e
eB
L
S
Q1
Θ
INCH.(BASE)
0.015(MIN)
0.155±0.005
0.020(MAX)
0.060(TYP)
0.012(MAX)
1.470(MAX)
0.6(TYP)
0.55(MAX)
0.100(TYP)
0.650±0.020
0.200(MAX)
0.06(MAX)
0.08(MAX)
o
15 (MAX)
MM(REF)
0.381(MIN)
3.937±0.127
0.508(MAX)
1.524(TYP)
0.304(MAX)
37.338(MAX)
15.24(TYP)
13.970(MAX)
2.540(TYP)
16.510±0.508
5.080(MAX)
1.524(MAX)
2.032(MAX)
o
15 (MAX)
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
8
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
28 pin 330 mil SOP Package Outline Dimension
UNIT
SYM.
A
A1
A2
b
c
D
E
E1
e
L
L1
S
y
Θ
INCH(BASE)
0.120(MAX)
0.002(MIN)
0.098±0.005
0.016(TYP)
0.010(TYP)
0.728(MAX)
0.340(MAX)
0.465±0.012
0.050(TYP)
0.038(MAX)
0.067±0.008
0.047(MAX)
0.004(MAX)
o
o
0 ~10
MM(REF)
3.048(MAX)
0.05(MIN)
2.489±0.127
0.406(TYP)
0.254(TYP)
18.491(MAX)
8.636(MAX)
11.811±0.305
1.270(TYP)
0.965(MAX)
1.702 ±0.203
1.194(MAX)
0.102(MAX)
o
o
0 ~10
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
9
®
LY62256
32K X 8 BIT LOW POWER CMOS SRAM
Rev. 2.9
28 pin 8x13.4mm STSOP Package Outline Dimension
HD
cL
12° (2x)
28
14
15
12° (2x)
b
E
e
1
"A"
y
Seating Plane
D
12° (2X)
14
15
0.254
A2
c
A
GAUGE PLANE
A1
0
SEATING PLANE
12° (2X)
L
1
28
SYMBOLS
A
A1
A2
b
c
HD
D
E
e
L
L1
Y
Θ
"A" DATAIL VIEW
DIMENSIONS IN MILLIMETERS
MIN
NOM
MAX
1.00
1.10
1.20
0.05
0.15
0.91
1.00
1.05
0.17
0.22
0.27
0.07
0.15
0.23
13.20
13.40
13.60
11.60
11.80
12.00
7.80
8.00
8.20
0.55
0.30
0.50
0.70
0.675
0.00
0.076
0°
3°
5°
DIMENSIONS IN INCHES
MIN
NOM
MAX
0.040
0.043
0.047
0.002
0.006
0.036
0.039
0.041
0.007
0.009
0.011
0.003
0.006
0.009
0.520
0.528
0.535
0.457
0.465
0.472
0.307
0.315
0.323
0.0216
0.012
0.020
0.028
0.027
0.000
0.003
0°
3°
5°
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
10
L1
®
LY62256
Rev. 2.9
32K X 8 BIT LOW POWER CMOS SRAM
28 pin 300 mil PDIP Package Outline Dimension
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
11
®
LY62256
Rev. 2.9
32K X 8 BIT LOW POWER CMOS SRAM
ORDERING INFORMATION
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
12
®
LY62256
Rev. 2.9
32K X 8 BIT LOW POWER CMOS SRAM
THIS PAGE IS LEFT BLANK INTENTIONALLY.
Lyontek Inc. reserves the rights to change the specifications and products without notice.
5F, No. 2, Industry E. Rd. IX, Science-Based Industrial Park, Hsinchu 300, Taiwan.
TEL: 886-3-6668838
FAX: 886-3-6668836
13
Similar pages