Industrial Power Supplies TIS Series, 50–600 Watt CB Features ◆ Switch mode power supplies for (LVD) DIN-rail mount Scheme UL 60950-1 UL 508 UL 1604 ◆ 6 power ranges with 2, 3, 6, 12, 20 and 24 A output current (24 VDC models) ◆ Selectable 115/230 VAC input ◆ Very low ripple and noise ◆ EMI complies with EN 61000-6-3 and EN 61000-6-4 ◆ Operating temp. range –25°C to +70°C ◆ For system operation available with built-in functions: RED: Redundancy module for N+1 Systems with true current sharing SIG: Signal module with AC-power fail, power good signal and external On/Off control UDS: DC-UPS module for uninter ruptable battery backed-up power systems ◆ Worldwide safety approvals incl. class I, div. 2 location ◆ Easy snap-on mount on DIN-rails or chassis mount ◆ 3-year product warranty The switching power supplies of the TIS series have been particularly designed for applications in industrial process control systems and with machine tools. Excellent specifications and high immunity against electrical disturbances guarantee reliable power for sensitive loads in rugged industrial environments. With the help of optional function modules specific requirements for system applications can be easily realized with a standard model. With the UDS module the power supplies can be extended to a perfect DC-UPS with automatic battery- backup. This function is very often required in applications where a time delayed shutdown of a system is necessary. To monitor and control the power supply a signal module can be installed. For parallel operation with active power sharing a redundancy option is available. This flexibility makes the TIS series power supplies a cost effective solution for many industrial applications. Models Order Code (includes terminal plugs) TIS 50-112 TIS 50-124 TIS 75-112 TIS 75-124 TIS 75-148 TIS 150-124 TIS 150-148 TIS 300-124 TIS 300-148 TIS 300-172 TIS 500-124-115 TIS 500-124-230 TIS 600-124 TIS 600-148 TIS 600-172 http://www.tracopower.com Input Voltage nom. 115–240 VAC universal input Output Power max. 50 W 115/230 VAC selectable 75 W 115/230 VAC selectable 150 W 115/230 VAC selectable 300 W 115 VAC 230 VAC 500 W 500 W 115/230 VAC selectable 600 W Output Voltage nom. 12 VDC 24 VDC 12 VDC 24 VDC 48 VDC 24 VDC 48 VDC 24 VDC 48 VDC 72 VDC 24 VDC 24 VDC 24 VDC 48 VDC 72 VDC Output Current max. 3.5 A 2.0 A 6.0 A 3.0 A 1.5 A 6.0 A 3.0 A 12.0 A 6.0 A 4.2 A 20.0 A 20.0 A 24.0 A 12.0 A 8.5 A Page 1 of 13 Industrial Power Supplies TIS Series 50–600 Watt Input Specifications Input voltage range TIS 50: TIS 75, 150, 300, 600: TIS 500-124-230. TIS 500-124-115: 93 – 264 VAC 93 – 132 VAC / 187 – 264 VAC 187 – 264 VAC 93 – 132 VAC Input frequency 47 – 63 Hz Input current at full load (typ.) TIS 50: TIS 75: TIS 150: TIS 300: TIS 500: TIS 600: at 115 VAC 0.85 A 1.3 A 2.7 A 4.9 A 6.0 A 7.0 A Recommended circuit breaker, TIS 50: characteristic C TIS 75: or fuse, slow blow typ TIS 150: TIS 300: TIS 500: TIS 600: 5.0 A 5.0 A 10.0 A 15.0 A 15.0 A 20.0 A at 230 VAC 0.50 A 0.75 A 1.6 A 2.9 A 4.3 A 5.0 A Output Specifications Output voltage adj. range 12 VDC models: 24 VDC models: 48 VDC models: 72 VDC models: 12 – 14 VDC 24 – 28 VDC 48 – 52 VDC 60 – 76 VDC Regulation 0.2 % 1.0 % 0.3 % (2.0 % in parallel operation) – Input variation – Load variation (10–90%) TIS 50, TIS 75, TIS 150: TIS 300, TIS 500, TIS 600: Ripple and noise (20MHz bandwidth) <50 mV pk-pk Electronic short circuit protection current limitation at 110 % typ. (constant current, automatic restart) Over voltage protection, trigger point at 140 % typ. Vout nom. Hold-up time TIS 50 ... TIS 300: TIS 500: TIS 600: http://www.tracopower.com 115 VAC 230 VAC min. 25 ms min. 30 ms min. 20 ms min. 40 ms min. 15 ms min. 25 ms Page 2 of 13 Industrial Power Supplies TIS Series 50–600 Watt General Specifications Temperature ranges – Operating (ambient temp.) –25°C to +70°C – Derating above 50°C (122°F) 2 %/K – Storage (non operating) –25°C to +85°C Humidity (non condensing) 95 % rel. H max. Pollution degree 2 Temperature coefficient 0.02 %/K Switching frequency 80 kHz typ. (pulse width modulation) Efficiency TIS 50 ... TIS 300: 85 % typ. TIS 500: 90 % typ. TIS 600: 90 % typ. Isolation according to IEC/EN 60950, UL 60950, UL 508 Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) TIS 50/75: 450’000 h / 420’000 h TIS 150/300: 420’000 h / 360’000 h TIS 500/600: 340’000 h / 300’000 h Safety standards IEC/EN 60950-1 (SELV, except 72 VDC models) UL/cUL 60950-1, UL 508, UL/cUL 1604 Safety approvals – CB report for IEC 60950 www.tracopower.com/products/tis-cb.pdf – UL approvals UL/cUL 60950, File e181381 UL/cUL 508, File e210002 UL/cUL 1604, File e213613 not for TIS 50 & 500 (Class I, Div. 2, Groups A, B, C and D hazardous locations) www.ul.com -> certifications – CSA certificate (UL 60950-1, CSA 60950-1) www.tracopower.com/products/tis-csa.pdf Electromagnetic compatibility (EMC), Emissions – Conducted RI suppression on input – Radiated RI suppression EN 61000-6-3 / EN 61000-6-4 EN 55011 class B, EN 55022 class B, FCC part 15, level B EN 55011 class A, EN 55022 class A, FCC part 15, level A Electromagnetic compatibility (EMC), Immunity – Electrostatic discharge (ESD) – Radiated RF field immunity – Electrical fast transient / burst immunity – Surge immunity – Immunity to conducted RF disturbances – Power frequency field immunity EN 61000-6-2 IEC/EN 61000-4-2 IEC/EN 61000-4-3 IEC/EN 61000-4-4 IEC/EN 61000-4-5 IEC/EN 61000-4-6 IEC/EN 61000-4-8 4 kV/8 kV 10 V/m 2 kV 2 kV/4 kV 10 V 30 A/m Safety class degree of electrical protection 1 (IEC 536) Case protection IP 20 (IEC 529) Environment – Vibration IEC 60068-2-6; 1 gn, 200 sweeps, each axis – Shock IEC 60068-2-27; 15 gn, 11 ms, each axis Enclosure material aluminium (chassis) / zinc plated steel (cover) Mounting (snap-on with self locking spring) for 35 mm DIN-rails as per EN 50022 Connection detachable screw terminal block (plugs included) (TIS 600: fixed screw terminal block) Instruction manual can be downloaded under: www.tracopower.com/products/tis-manual.pdf All specifications valid at nominal input voltage, full load and +25 °C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 13 Industrial Power Supplies TIS Series 50–600 Watt Power Supplies with Redundancy Function With this option a parallel operation of up to 5 units is possible. Decoupling diodes and current share lines allow to build true N +1 redundant systems with active current sharing for all units. This function also includes an alarm relay to signal a single unit failure. This option is available for TIS 150 W, TIS 300 W and TIS 600 W models. Please note: This option cannot be combined with other options. Models Input Voltage Output Power Output Voltage Output Current max. nom. max. 24 VDC 6.0 A 48 VDC 3.0 A 24 VDC 12 A 48 VDC 6.0 A 24 VDC 24 A 48 VDC 12 A (includes terminal plugs) TIS 150-124 RED 115/230 VAC selectable TIS 300-124 RED 115/230 VAC TIS 300-148 RED selectable TIS 600-124 RED 115/230 VAC TIS 600-148 RED selectable 115/230VAC TIS 150-148 RED L N Con1 Pin3 Con1 Pin2 150 W 300 W 600 W Con2 - Pin3/4 AC Bus Indicator DC Con2 - Pin1/2 +Vout 24/48VDC Order Code -Vout Con1 Pin1 I-Sense V-Sense Con3 - Pin4 Con3 - Pin3 Con3 - Pin2 Con3 - Pin1 Regulator Current Shareline Unit OK Common Unit OK Unit OK Specifications Rating per relay contact 60 VDC /0.36 A max. Instruction manual for RED option can be downloaded under: http://www.tracopower.com/products/tis-red_manual.pdf http://www.tracopower.com Page 4 of 13 Industrial Power Supplies TIS Series 50–600 Watt Power Supplies with Powerfail Functions These models provide 3 functions required in many process control system applications: ◆ AC-Powerfail signal (relay contact) ◆ Power Good signal (relay contact) ◆ Remote On/Off Models Output Power max. (includes terminal plugs) TIS 150-124 SIG 115/230 VAC TIS 150-148 SIG selectable TIS 300-124 SIG 115/230 VAC selectable TIS 600-124 SIG 115/230 VAC TIS 600-148 SIG selectable 115/230VAC TIS 300-148 SIG L N Con1 Pin3 Con1 Pin2 150 W 300 W 600 W Output Voltage nom. max. 24 VDC 6.0 A 48 VDC 3.0 A 24 VDC 12 A 48 VDC 6.0 A 24 VDC 24 A 48 VDC 12 A Con2 - Pin3/4 AC +Vout Output OK DC Con2 - Pin1/2 Con1 Pin1 Con3 - Pin2 Remote ON/OFF -Vout + Con3 - Pin1 - Con3 - Pin7 Con3 - Pin6 Mains Fail Detection Output Current 24/48VDC Input Voltage Remote ON/OFF Order Code Common AC-Powerfail Mains OK (Relay A) Con3 - Pin5 Con3 - Pin4 Con3 - Pin3 Power Good Detection (Relay B) Power Good Common Power Good Power Good Specifications Power Good signal trigger point models with 24 Vout: >22.8 VDC ±0.5 V relay B closed (pin 4 – pin 3) models with 48 Vout: >45.6 VDC ±1.0 V relay B closed (pin 4 – pin 3) AC-Powerfail signal Vin <93 resp. <187 VAC relay A closed (pin 7 – pin 6) Raiting per relay contact 60 VDC /0.36 A max. Remote On/Off – On short circuit con 3 pin 1 and pin 2 – Off open circuit con 3 pin 1 and pin 2 Instruction manual for SIG option can be downloaded under: http://www.tracopower.com/products/tis-sig_manual.pdf http://www.tracopower.com Page 5 of 13 Industrial Power Supplies TIS Series 50–600 Watt DC-UPS-System In addition to the standard power supply function, these models include a professional battery management system to charge and monitor an external battery. In the event of a power failure the battery is switched automatically and without any interruption to the DC output. Once mains power is available again, the battery is switched off. The backup time is limited only by battery capacity and load. Charge current and voltage can be adjusted to values as required by battery type. Power fail and low battery alarm signals are available via two independent relay contacts. During normal operation the battery status is monitored by periodically loading the battery for a short time. If a cell resistance is high, there is a relay alarm is available. The battery is fully protected under any operational conditions. The power supply is short circuit protected even in battery backup operation but, for safety reasons, the battery should be fitted with a fast blow fuse. Battery mode can be activated by interconnecting pin 7 and 8. Complete external battery packs (3.2 Ah or 7 Ah standard) with lead batteries and circuit breaker are available (see page 8). Models Order Code 1) Input Voltage TIS 300-124 UDS 115/230 VAC TIS 600-124 UDS 115/230 VAC Output Power Output Voltage Output Current 2) max. nom. max. 300 W 24 VDC 12 A 600 W 24 VDC 24 A selectable selectable 1) Includes terminal plugs, does not include batteries 2) reduce max. output current by battery charging current http://www.tracopower.com Page 6 of 13 Industrial Power Supplies TIS Series 50–600 Watt DC-UPS-System Con3 - Pin2 Battery + V Battery Charger Con3 - Pin1 I Con1 Pin3 L N Con1 Pin2 AC Con2 - Pin3/4 Output OK DC Con2 - Pin1/2 Con1 Pin1 +Vout 24VDC 115/230VAC Battery - -Vout VBat>18V Bat ON/OFF Mains Fail Battery Switch Logic Battery ON/OFF Con4 Pin8 Con4 - Pin3 Con4 - Pin2 Con4 - Pin1 Con4 Pin7 Mains Fail Detection AC-Powerfail Common AC-Power OK AC-Powerfail (Relay A) Con4 - Pin6 Con4 - Pin5 Con4 - Pin4 Battery Test Battery Low / failure Common Battery OK Low Battery (Relay B) Specifications Charging current (factory set) TIS 300-124 UDS: 1.2 A TIS 600-124 UDS: 2.4 A Adjustment range of charging current TIS 300-124 UDS: 0.15 – 1.5 A TIS 600-124 UDS: 0.25 – 2.5 A Holding current for charged battery at voltage 27.3 VDC <50 mA Overload or short circuit during battery operation system switches off AC-Powerfail signal Vin <93 or <187 VAC relay A closed (pin 2 – pin 3) Low battery signal – Battery voltage below 22 V relay B closed (pin 5 – pin 6) – Raiting per relay contact 60 VDC /0.36 A max. During battery charge operation output current reduction by 1.4 x battery charge current Instruction manual for UDS option can be downloaded under: http://www.tracopower.com/products/tis-uds_manual.pdf http://www.tracopower.com Page 7 of 13 Industrial Power Supplies TIS Series 50–600 Watt Battery-Pack for DC-UPS Systems The battery pack contains high quality, maintenance free lead-acid batteries with 3.2 Ah or 7.0 Ah capacity. The batteries are fixed together with a re-settable electronic fuse on a solid mounting frame. Together with power supply models TIS 300-124 UDS or TIS 600-124 UDS the battery pack provides a complete and reliable DC-UPS system. Backup time depends on load current and battery capacity. Models Order Code Battery Voltage TIS 24-32AP 24 VDC TIS 24-70AP 24 VDC Battery Capacity Permissable Charge (25 °C, 20 h-rate) Current max. 3.2 Ah 1.2 A 7.0 Ah 2.4 A Specifications Max. charge voltage 27 – 27.6 VDC Temperature coefficient –36 mV/°C Temperature range – at charge operation –15°C to +50°C – at load operation –20°C to +60°C – Storage –20°C to +60°C Average lifetime on standby operation at tA =20°C 4 – 5 years (Limited Warranty on Battery) Cable length 1.0 m Cable diameter TIS 24-32 AP: 2.5 mm2 (AWG 12) TIS 24-70 AP: 4.0 mm2 (AWG 11) Weight TIS 24-32 AP: 2.9 kg (6.4 lb) TIS 24-70 AP: 4.1 kg (9.1 lb) Recommended combinations (power supplies) TIS 24-32 AP: TIS 300-124 UDS TIS 24-70 AP: TIS 600-124 UDS http://www.tracopower.com Page 8 of 13 Industrial Power Supplies TIS Series 50–600 Watt Case Dimensions Model TIS 50-112 Input L N Output +– 12 VDC 115/230 VAC 1,2/0,7 A 3,5 A 5 75 (2.95) (0.2) +– 39.5 adj (1.56) 34 (1.34) 114.6 (4.51) Industrial Power Supply Output L N 115/230 VAC 12 VDC 6 A 1,7/0,9 A Industrial Power Supply DC-ON 86.5 (3.4) (1.24) 26 Input DC-ON 74.0 (2.91) 100.0 (3.94) adj 31.5 TIS 75 models (1.02) TIS 50 models Model TIS 75-112 56.7 5 90 (3.54) (2.23) (0.2) 37.5 56.7 (2.23) 10 10 (0.39) Weight: 0.41 kg (0.9 lb) (0.39) 45 (1.77) (1.48) Weight: 0.48 kg (1.06 lb) Industrial Power Supply Model TIS 150-124 Input 115/230 50/60Hz 3,7/1,7 A N L (1.56) +– 24 VDC / 6 A DC-ON 86.5 (3.4) 114.6 (4.51) Output 39.5 34 (1.34) TIS 150 models 5 157 (6.18) 56.7 (2.23) (0.2) 38.5 80 (3.15) 10 (0.39) (1.52) Connectors ( Included in shipment) Weight: 0.80 kg (1.76 lb) TIS PLUG-1 Connector Set for TIS 50/ 75/ 150 TIS PLUG-1-RED Connector Set for TIS 150-1xx RED Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) http://www.tracopower.com Page 9 of 13 Industrial Power Supplies TIS Series 50–600 Watt Case Dimensions 91.5 (3.6) Model (1.56) DC-ON Industrial Power Supply TIS300-172 (1.36) 114.6 (4.51) ++– – 72 VDC / 4 A 39.5 Output 34.5 34 (1.34) TIS 300 models Input 115/230 50/60Hz 5,4/3,3 A N L 207 (8.15) 5 10 83 (3.27) (0.39) 130 (5.12) 38.5 (1.52) 83 (3.27) (0.2) Connectors ( Included in shipment) Weight: 1.4 kg (3.09 lb) TIS PLUG-3 Connector Set for TIS 300 TIS PLUG-3-RED Connector Set for TIS 300-1xx RED TIS PLUG-3-UDS Connector Set for TIS 300-1xx UDS TIS PLUG-5 Connector Set for TIS 500 Industrial Power Supply TIS 500-124-230 47 (1.85) DC-ON Model Input 94 (3.7) 130 (5.12) 41.5 (1.63) TIS 500 models Output 230 VAC 50/60Hz 5,3 A N L 24 VDC / 20 A ++– – 5 220 (8.66) 83 (3.27) (0.2) (5.12) Weight: 1.9 kg (4.19 lb) http://www.tracopower.com (0.39) 130 10 46 (1.81) Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Page 10 of 13 Industrial Power Supplies TIS Series 50–600 Watt Outline Dimensions mm (inches) TIS 600 models Input Industrial Power Supply 115/230 VAC 50/60Hz 10,5/6,4 A Output – –++ 24 VDC / 20 A 120.2 (4.73) 177.2 (6.98) N L Model TIS 600-124 82.6 (3.25) 243 (9.57) 32 179 (7.05) 6.8 (0.27) 82.8 (3.26) (1.26) Weight: 2.0 kg (4.41 lb) Connectors ( Included in shipment) TIS PLUG-6-RED Connector Set for TIS 600-1xx RED TIS PLUG-6-UDS Connector Set for TIS 600-1xx UDS Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) http://www.tracopower.com Page 11 of 13 Industrial Power Supplies TIS Series 50–600 Watt Optional Mounting Systems Wall mounting kit A B 7.5 4.6 Models Order code (0.30) E D C (0.18) A B C D E TIS 75 MK-75 37 (1.46) 14.5 (0.57) – 134.5 (5.30) 150.5 (5.93) TIS 150 MK-150 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 300 MK-300 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 500 MK-500 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93) TIS 600 MK-600 190 (7.48) 37.5 (1.48) 115 (4.53) 197.0 (7.76) 207.0 (8.15) Rugged DIN-Rail mounting kit A B 25 countersink M4 Models Order code A B C TIS 150 RMK-150 150 (5.91) 115 (4.53) 35 (1.38) TIS 300 RMK-300 200 (7.87) 165 (6.50) 35 (1.38) TIS 500 RMK-300 200 (7.87) 165 (6.50) 35 (1.38) TIS 600 standard 180 (7.09) 165 (6.50) 15 (0.59) (0.98) 50.1 (1.97) 4.2 (0.17) C Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) http://www.tracopower.com Page 12 of 13 Industrial Power Supplies TIS Series 50–600 Watt Outline Dimensions mm (inches) TIS 24-32AP 204 (8.03) 14 184 (7.24) (0.55) Detail A 7 7 12 Detail B 9 (0.28) 69 (2.72) (0.47) 5.8 B (0.35) B 135 (5.14) A 100 (3.94) A (0.23) (0.28) Weight (incl. batteries): TIS 24-32AP 2.9 kg (6.4 lb) TIS 24-70AP 4.1 kg (9.1 lb) TIS 24-70AP 272 (10.71) A B B 69 (2.72) 100 (3.94) A 152 (5.98) 252 (9.92) Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. May 17. 2013 Page 13 of 13