FDMS7602S Dual N-Channel PowerTrench® MOSFET Q1: 30 V, 30 A, 7.5 mΩ Q2: 30 V, 30 A, 5.0 mΩ Features General Description Q1: N-Channel This device includes two specialized N-Channel MOSFETs in a Max rDS(on) = 7.5 mΩ at VGS = 10 V, ID = 12 A dual MLP package.The switch node has been internally Max rDS(on) = 12 mΩ at VGS = 4.5 V, ID = 10 A connected to enable easy placement and routing of synchronous buck converters. The control MOSFET (Q1) and synchronous Q2: N-Channel SyncFET (Q2) have been designed to provide optimal power Max rDS(on) = 5.0 mΩ at VGS = 10 V, ID = 17 A efficiency. Max rDS(on) = 6.8 mΩ at VGS = 4.5 V, ID = 14 A Applications RoHS Compliant Computing Communications General Purpose Point of Load Notebook VCORE S2 S2 S2 G2 S1/D2 D1 D1 D1 D1 Top G1 Bottom Q2 4 D1 S2 5 S2 6 3 D1 S2 7 2 D1 G2 8 1 G1 Q1 Power 56 MOSFET Maximum Ratings TA = 25 °C unless otherwise noted Symbol VDS Drain to Source Voltage Parameter VGS Gate to Source Voltage Units V V (Note 3) ±20 ±20 TC = 25 °C 30 30 -Continuous (Silicon limited) TC = 25 °C 50 80 -Continuous TA = 25 °C 121a 171b 40 60 Power Dissipation for Single Operation TA = 25 °C 2.21a 2.51b Power Dissipation for Single Operation TA = 25 °C 1.01c 1.01d ID -Pulsed TJ, TSTG Q2 30 -Continuous (Package limited) Drain Current PD Q1 30 Operating and Storage Junction Temperature Range -55 to +150 A W °C Thermal Characteristics Thermal Resistance, Junction to Ambient 571a 501b RθJA Thermal Resistance, Junction to Ambient 1251c 1201d RθJC Thermal Resistance, Junction to Case 3.5 2 RθJA °C/W Package Marking and Ordering Information Device Marking FDMS7602S Device FDMS7602S ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 Package Power 56 1 Reel Size 13 ” Tape Width 12 mm Quantity 3000 units www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET August 2010 Symbol Parameter Test Conditions Type Min 30 30 Typ Max Units Off Characteristics BVDSS Drain to Source Breakdown Voltage ID = 250 μA, VGS = 0 V ID = 1 mA, VGS = 0 V Q1 Q2 ΔBVDSS ΔTJ Breakdown Voltage Temperature Coefficient ID = 250 μA, referenced to 25 °C ID = 1 mA, referenced to 25 °C Q1 Q2 IDSS Zero Gate Voltage Drain Current VDS = 24 V, VGS = 0 V Q1 Q2 1 500 μA μA IGSS Gate to Source Leakage Current VGS = 20 V, VDS= 0 V VGS = 20 V, VDS= 0 V Q1 Q2 100 100 nA nA 3 3 V V 15 15 mV/°C On Characteristics VGS(th) Gate to Source Threshold Voltage VGS = VDS, ID = 250 μA VGS = VDS, ID = 1 mA Q1 Q2 ΔVGS(th) ΔTJ Gate to Source Threshold Voltage Temperature Coefficient ID = 250 μA, referenced to 25 °C ID = 1 mA, referenced to 25 °C Q1 Q2 -6 -5 VGS = 10 V, ID = 12 A VGS = 4.5 V, ID = 10 A VGS = 10 V, ID = 12 A , TJ = 125 °C Q1 6.0 8.5 8.3 7.5 12 12 VGS = 10 V, ID = 17 A VGS = 4.5 V, ID = 14 A VGS = 10 V, ID = 17 A , TJ = 125 °C Q2 4.2 5.4 4.9 5.0 6.8 7.2 VDS = 5 V, ID = 12 A VDS = 5 V, ID = 17 A Q1 Q2 63 87 Q1: VDS = 15 V, VGS = 0 V, f = 1 MHZ Q1 Q2 1315 2020 1750 2690 pF Q1 Q2 445 860 600 1145 pF Q1 Q2 45 95 70 145 pF Q1 Q2 0.9 0.7 rDS(on) gFS Drain to Source On Resistance Forward Transconductance 1 1 1.8 1.8 mV/°C mΩ S Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate Resistance Q2: VDS = 15 V, VGS = 0 V, f = 1 MHZ Ω Switching Characteristics td(on) Turn-On Delay Time tr Rise Time td(off) Turn-Off Delay Time tf Fall Time Qg Total Gate Charge Qg Total Gate Charge Qgs Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 Q1: VDD = 15 V, ID = 12 A, RGEN = 6 Ω Q2: VDD = 15 V, ID = 17 A, RGEN = 6 Ω VGS = 0 V to 10 V Q1 VDD = 15 V, VGS = 0 V to 4.5 V ID = 12 A Q2 VDD = 15 V, ID = 17 A Q1 Q2 8.6 11 18 20 ns Q1 Q2 2.5 3.8 10 10 ns Q1 Q2 20 27 32 43 ns Q1 Q2 2.3 3.2 10 10 ns Q1 Q2 20 33 28 46 nC Q1 Q2 9.3 16 13 22 nC Q1 Q2 4.3 5.8 nC Q1 Q2 2.2 4.6 nC www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Electrical Characteristics TJ = 25 °C unless otherwise noted Symbol Parameter Test Conditions Type Min Typ Max Units Q1 Q2 0.8 0.8 1.2 1.2 V Q1 Q2 27 29 43 46 ns Q1 Q2 10 31 18 50 nC Drain-Source Diode Characteristics VSD Source to Drain Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge VGS = 0 V, IS = 12 A VGS = 0 V, IS = 17 A (Note 2) (Note 2) Q1 IF = 12 A, di/dt = 100 A/μs Q2 IF = 17 A, di/dt = 300 A/μs Notes: 1: RθJA is determined with the device mounted on a 1 in2 pad 2 oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. RθJC is guaranteed by design while RθCA is determined by the user's board design. a. 57 °C/W when mounted on a 1 in2 pad of 2 oz copper c. 125 °C/W when mounted on a minimum pad of 2 oz copper b. 50 °C/W when mounted on a 1 in2 pad of 2 oz copper d. 120 °C/W when mounted on a minimum pad of 2 oz copper 2: Pulse Test: Pulse Width < 300 μs, Duty cycle < 2.0%. 3: As an N-ch device, the negative Vgs rating is for low duty cycle pulse ocurrence only. No continuous rating is implied. ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Electrical Characteristics TJ = 25 °C unless otherwise noted 40 4 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) VGS = 10 V VGS = 6 V 30 VGS = 4.5 V VGS = 4 V 20 10 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX VGS = 3.5 V 0 0.0 0.5 1.0 1.5 VDS, DRAIN TO SOURCE VOLTAGE (V) PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 3 VGS = 3.5 V VGS = 4 V 2 VGS = 4.5 V 1 VGS = 6 V 0 2.0 0 Figure 1. On Region Characteristics 30 40 40 ID = 12 A VGS = 10 V rDS(on), DRAIN TO 1.4 1.2 1.0 0.8 -75 SOURCE ON-RESISTANCE (mΩ) NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 10 20 ID, DRAIN CURRENT (A) Figure 2. Normalized On-Resistance vs Drain Current and Gate Voltage 1.6 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 30 ID = 12 A 20 TJ = 125 oC 10 TJ = 25 oC 0 -50 2 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (oC) 4 6 8 10 VGS, GATE TO SOURCE VOLTAGE (V) Figure 3. Normalized On Resistance vs Junction Temperature Figure 4. On-Resistance vs Gate to Source Voltage 40 40 IS, REVERSE DRAIN CURRENT (A) PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX ID, DRAIN CURRENT (A) VGS = 10 V 30 VDS = 5 V TJ = 150 oC 20 TJ = 25 oC 10 TJ = -55 oC 0 1.5 2.0 2.5 3.0 3.5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 4.0 VGS = 0 V 10 1 TJ = 150 oC TJ = 25 oC 0.1 0.01 TJ = -55 oC 0.001 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Source to Drain Diode Forward Voltage vs Source Current www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Typical Characteristics (Q1 N-Channel)TJ = 25°C unless otherwise noted VGS, GATE TO SOURCE VOLTAGE (V) 10 2000 ID = 12 A 1000 Ciss 8 CAPACITANCE (pF) VDD = 10 V 6 VDD = 15 V 4 VDD = 20 V Coss 100 2 Crss f = 1 MHz VGS = 0 V 0 0 5 10 15 10 0.1 20 Figure 7. Gate Charge Characteristics 10 30 Figure 8. Capacitance vs Drain to Source Voltage 60 100 o RθJC = 3.5 C/W 100us ID, DRAIN CURRENT (A) VGS = 10 V ID, DRAIN CURRENT (A) 1 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) 40 VGS = 4.5 V 20 Limited by Package 10 1 ms 1 0.1 10 ms THIS AREA IS LIMITED BY rDS(on) 100 ms SINGLE PULSE TJ = MAX RATED 1s 10s o RθJA = 125 C/W DC TA = 25 oC 0 25 50 75 100 125 0.01 0.01 150 o TC, CASE TEMPERATURE ( C) 0.1 1 10 100 200 VDS, DRAIN to SOURCE VOLTAGE (V) Figure 9. Maximum Continuous Drain Current vs Case Temperature Figure 10. Forward Bias Safe Operating Area P(PK), PEAK TRANSIENT POWER (W) 1000 SINGLE PULSE o RθJA = 125 C/W o TA = 25 C 100 10 1 0.5 -4 10 -3 10 -2 10 -1 10 1 10 100 1000 t, PULSE WIDTH (s) Figure 11. Single Pulse Maximum Power Dissipation ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Typical Characteristics (Q1 N-Channel)TJ = 25°C unless otherwise noted 2 NORMALIZED THERMAL IMPEDANCE, ZθJA 1 0.1 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 0.01 SINGLE PULSE t2 o NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZθJA x RθJA + TA RθJA = 125 C/W (Note 1c) 0.001 -4 10 -3 10 -2 10 -1 10 1 10 100 1000 t, RECTANGULAR PULSE DURATION (sec) Figure 12. Junction-to-Ambient Transient Thermal Response Curve ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Typical Characteristics (Q1 N-Channel)TJ = 25°C unless otherwise noted 60 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 5 ID, DRAIN CURRENT (A) VGS = 10 V VGS = 4.5 V 40 VGS = 4 V VGS = 3.5 V 20 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX VGS = 3 V 0 0.0 0.5 1.0 1.5 VDS, DRAIN TO SOURCE VOLTAGE (V) VGS = 3 V 3 VGS = 3.5 V 2 VGS = 4 V 1 VGS = 10 V VGS = 4.5 V 0 0 20 40 60 ID, DRAIN CURRENT (A) Figure 14. Normalized on-Resistance vs Drain Current and Gate Voltage 20 ID = 17 A VGS = 10 V rDS(on), DRAIN TO 1.4 1.2 1.0 0.8 0.6 -75 SOURCE ON-RESISTANCE (mΩ) 1.6 NORMALIZED DRAIN TO SOURCE ON-RESISTANCE 4 2.0 Figure 13. On-Region Characteristics 15 ID = 17 A 10 TJ = 125 oC 5 TJ = 25 oC 2 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (oC) IS, REVERSE DRAIN CURRENT (A) 40 TJ = 125 oC TJ = 25 oC TJ = -55 oC 2.5 3.0 VGS, GATE TO SOURCE VOLTAGE (V) Figure 17. Transfer Characteristics ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 8 10 60 VDS = 5 V 2.0 6 Figure 16. On-Resistance vs Gate to Source Voltage PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 20 4 VGS, GATE TO SOURCE VOLTAGE (V) 60 0 1.5 PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 0 -50 Figure 15. Normalized On-Resistance vs Junction Temperature ID, DRAIN CURRENT (A) PULSE DURATION = 80 μs DUTY CYCLE = 0.5% MAX 3.5 VGS = 0 V 10 TJ = 125 oC 1 TJ = 25 oC 0.1 TJ = -55 oC 0.01 0.0 0.2 0.4 0.6 0.8 1.0 1.2 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 18. Source to Drain Diode Forward Voltage vs Source Current www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Typical Characteristics (Q2 SyncFET) VGS, GATE TO SOURCE VOLTAGE (V) 10 3000 ID = 17 A Ciss CAPACITANCE (pF) 8 VDD = 10 V 6 VDD = 15 V 4 VDD = 20 V 2 1000 Coss 100 f = 1 MHz 0 0 10 20 30 40 1 Qg, GATE CHARGE (nC) 100 o RθJC = 2 C/W VGS = 10 V ID, DRAIN CURRENT (A) 80 60 VGS = 4.5 V 40 20 75 100 us 10 1 ms 1 0.1 10 ms THIS AREA IS LIMITED BY rDS(on) 100 ms 1s SINGLE PULSE TJ = MAX RATED 10 s RθJA = 120 oC/W Limited by package 50 30 Figure 20. Capacitance vs Drain to Source Voltage 100 0 25 10 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 19. Gate Charge Characteristics ID, DRAIN CURRENT (A) Crss VGS = 0 V 60 0.1 DC TA = 25 oC 100 125 0.01 0.01 150 o TC, CASE TEMPERATURE ( C) 0.1 1 100 200 10 VDS, DRAIN to SOURCE VOLTAGE (V) Figure 21. Maximum Continuous Drain Current vs Case Temperature Figure 22. Forward Bias Safe Operating Area P(PK), PEAK TRANSIENT POWER (W) 1000 SINGLE PULSE RθJA = 120 oC/W TA = 25 oC 100 10 1 -4 10 -3 10 -2 10 -1 10 1 10 2 10 3 10 t, PULSE WIDTH (sec) Figure 23. Single Pulse Maximum Power Dissipation ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Typical Characteristics (Q2 SyncFET) 2 NORMALIZED THERMAL IMPEDANCE, ZθJA 1 0.1 DUTY CYCLE-DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 0.01 SINGLE PULSE t2 o NOTES: DUTY FACTOR: D = t1/t2 PEAK TJ = PDM x ZθJA x RθJA + TA RθJA = 120 C/W (Note 1d) 0.001 -4 10 -3 10 -2 10 -1 10 1 10 2 10 3 10 t, RECTANGULAR PULSE DURATION (sec) Figure 24. Junction-to-Ambient Transient Thermal Response Curve ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Typical Characteristics (Q2 SyncFET) SyncFET Schottky body diode Characteristics 20 CURRENT (A) 15 10 di/dt = 300 A/μs 5 0 -5 0 50 100 150 TIME (ns) Figure 25. FDMS7602S SyncFET body diode reverse recovery characteristic ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 200 Schottky barrier diodes exhibit significant leakage at high temperature and high reverse voltage. This will increase the power in the device. IDSS, REVERSE LEAKAGE CURRENT (uA) Fairchild’s SyncFET process embeds a Schottky diode in parallel with PowerTrench MOSFET. This diode exhibits similar characteristics to a discrete external Schottky diode in parallel with a MOSFET. Figure 25 shows the reverse recovery characteristic of the FDMS7602S. 10000 TJ = 125 oC 1000 TJ = 100 oC 100 10 TJ = 25 oC 1 0 5 10 15 20 25 30 VDS, REVERSE VOLTAGE (V) Figure 26. SyncFET body diode reverse leakage versus drain-source voltage www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET Typical Characteristics (continued) FDMS7602S Dual N-Channel PowerTrench® MOSFET Dimensional Outline and Pad Layout ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 www.fairchildsemi.com *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used here in: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I48 ©2010 Fairchild Semiconductor Corporation FDMS7602S Rev.C1 www.fairchildsemi.com FDMS7602S Dual N-Channel PowerTrench® MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Power-SPM™ AccuPower™ F-PFS™ ®* PowerTrench® Auto-SPM™ FRFET® SM Global Power Resource PowerXS™ The Power Franchise® Build it Now™ ® Green FPS™ CorePLUS™ Programmable Active Droop™ CorePOWER™ Green FPS™ e-Series™ QFET® CROSSVOLT™ QS™ Gmax™ TinyBoost™ CTL™ Quiet Series™ GTO™ TinyBuck™ Current Transfer Logic™ RapidConfigure™ IntelliMAX™ TinyCalc™ ™ DEUXPEED® ISOPLANAR™ TinyLogic® Dual Cool™ MegaBuck™ TINYOPTO™ ® EcoSPARK MICROCOUPLER™ Saving our world, 1mW/W/kW at a time™ TinyPower™ EfficentMax™ MicroFET™ SignalWise™ TinyPWM™ ESBC™ MicroPak™ SmartMax™ TinyWire™ MicroPak2™ SMART START™ ® TriFault Detect™ MillerDrive™ SPM® TRUECURRENT™* STEALTH™ MotionMax™ Fairchild® μSerDes™ SuperFET™ Motion-SPM™ Fairchild Semiconductor® SuperSOT™-3 OptiHiT™ FACT Quiet Series™ SuperSOT™-6 OPTOLOGIC® FACT® UHC® SuperSOT™-8 OPTOPLANAR® FAST® ® Ultra FRFET™ SupreMOS™ FastvCore™ UniFET™ SyncFET™ FETBench™ VCX™ Sync-Lock™ FlashWriter® * PDP SPM™ VisualMax™ FPS™ XS™