AIMTEC AM1SS-1215SZ 1 watt | dc-dc converter Datasheet

Series AM1SS-Z
1 Watt | DC-DC Converter
FEATURES:
•
•
•
•
•
•
•
•
RoHS compliant
4 Pin SIP Package
Low ripple and noise
High efficiency up to 76%
Operating temperature -40oC to +85oC
Input / output isolation 1000 and 3000VDC
Pin compatible with multiple manufacturers
Continuous short circuit protection
Models
Single output
Input Voltage
(V)
Output Voltage
(V)
Output Current max
(mA)
Isolation
(VDC)
Efficiency
(%)
AM1SS-0505SZ
AM1SS-0512SZ
AM1SS-0515SZ
AM1SS-1205SZ
AM1SS-1212SZ
AM1SS-1215SZ
AM1SS-2405SZ
AM1SS-2412SZ
AM1SS-2415SZ
4.5-5.5
4.5-5.5
4.5-5.5
10.8-13.2
10.8-13.2
10.8-13.2
21.6-26.4
21.6-26.4
21.6-26.4
5
12
15
5
12
15
5
12
15
200
83
67
200
83
67
200
83
67
1000
1000
1000
1000
1000
1000
1000
1000
1000
74
75
75
74
75
75
74
75
76
AM1SS-0505SH30Z
AM1SS-0512SH30Z
AM1SS-0515SH30Z
AM1SS-1205SH30Z
AM1SS-1212SH30Z
AM1SS-1215SH30Z
AM1SS-2405SH30Z
AM1SS-2412SH30Z
AM1SS-2415SH30Z
4.5-5.5
4.5-5.5
4.5-5.5
10.8-13.2
10.8-13.2
10.8-13.2
21.6-26.4
21.6-26.4
21.6-26.4
5
12
15
5
12
15
5
12
15
200
83
67
200
83
67
200
83
67
3000
3000
3000
3000
3000
3000
3000
3000
3000
74
75
75
74
75
75
74
75
76
Model
NOTE: All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated
output load unless otherwise specified.
Input Specifications
Parameters
Voltage range
Nominal
Typical
5
12
24
Filter
Turn on Transient process time
Start up time
Absolute Maximum Rating
Peak Input Voltage time
Input reflected Ripple current
Maximum
Units
4.5-5.5
10.8-13.2
21.6-26.4
Capacitor
VDC
25
With 12µH
200
0-7
0-15
0-28
100
20
Conditions
Typical
5 Vin
12 Vin
24 Vin
ms
ms
VDC
ms
mA p-p
Isolation Specifications
Parameters
Tested I/O voltage
Resistance
Capacitance
3 sec
Rated
Units
1000 and 3000
VDC
MOhm
pF
Maximum
Units
> 1000
10
Output Specifications
Parameters
Conditions
Typical
Voltage accuracy
Short Circuit protection
www.aimtec.com
F 051e R12.A
±3
%
Continuous
Tel: +1 514 620 2722
1 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Series AM1SS-Z
1 Watt | DC-DC Converter
Output Specifications (continued)
Parameters
Short circuit restart
Line voltage regulation
Load voltage regulation
Temperature coefficient
Ripple & Noise
Capacitive load
Rising time
Conditions
Typical
Maximum
Units
Auto-Recovery
±1.2
±10
±0.02
100
For 1% change of Vin
Load 20 – 100%
At 20MHz Bandwidth
% of Vin
%
%/oC
mV p-p
μF
ms
220
50
General Specifications
Parameters
Switching frequency
Operating temperature
Storage temperature
Max Case temperature
Cooling
Humidity
Case material
Weight
Dimensions (L x W x H)
MTBF
Conditions
Typical
100% load
Full Load without Derating
80
Maximum
Units
100
KHz
o
C
o
C
o
C
-40 to +85
-40 to +125
Free air convection
95
Non-conductive black plastic UL94-VO
1.5
0.46 x 0.24 x 0.40 inches 11.68 x 6.00 x 10.15 mm
>1 121 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC)
%
g
Safety Specifications
Standards
Safety
IEC 60950-1 (Designed to meet)
Pin Out Specifications
Pin
1
2
3
4
Dimensions
11.68
(0.46)
Single
- V Input
+V Input
- V Output
+V Output
PRINTED
FACE
6.00
(0.24)
10.15
(0.40)
9.65
(0.38)
0.50
(0.02)
3.05
(0.12)
2.54
(0.10)
0.50
(0.02)
1.25
(0.05)
0.30
(0.10)
6.00
(0.24)
0.50
(0.02)
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 051e R12.A
Tel: +1 514 620 2722
2 of 2
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only
Similar pages