BY500-100 thru BY500-800 Vishay General Semiconductor Soft Recovery Fast Switching Plastic Rectifier FEATURES • Fast switching for high efficiency • Low forward voltage drop • Low leakage current • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC DO-201AD TYPICAL APPLICATIONS For use in medium frequency rectification of switching mode power supplies, inverters, converters, TV sanning, Ultrasonic-system, speed controlled DC motors, low RF interference and freewheeling diode circuit. PRIMARY CHARACTERISTICS IF(AV) 5.0 A VRRM 100 V to 800 V IFSM 200 A MECHANICAL DATA trr 200 ns IR 10 μA VF 1.35 V Case: DO-201AD, molded epoxy body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade TJ max. 125 °C Note • These devices are not AEC-Q101 qualified. Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BY500-100 BY500-200 BY500-400 BY500-600 BY500-800 Maximum repetitive peak reverse voltage VRRM UNIT 100 200 400 600 800 V Maximum RMS voltage VRMS 70 140 280 420 560 V Maximum DC blocking voltage VDC 100 200 400 600 800 V Maximum average forward rectified current 0.375" (9.5 mm) lead length at TL = 45 °C IF(AV) 5.0 A Peak forward surge current 10 ms single half sine-wave superimposed on rated load at TA = 25 °C IFSM 200 A Maximum repetitive peak forward surge IFRM 10 A TJ - 50 to + 125 °C TSTG - 50 to + 150 °C Operating junction temperature range Storage temperature range Document Number: 88544 Revision: 26-Oct-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 BY500-100 thru BY500-800 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 5.0 A Maximum DC reverse current at rated DC blocking voltage SYMBOL BY500-100 BY500-200 BY500-400 BY500-600 BY500-800 UNIT VF 1.35 V 10 μA 1.0 mA trr 200 ns IRM(REC) 2.0 A CJ 28 pF SYMBOL BY500-100 BY500-200 BY500-400 BY500-600 BY500-800 UNIT RθJA (1) 22 °C/W TA = 25 °C IR TA = 100 °C Maximum reverse recovery time Maximum reverse recovery current IF = 1.0 A, VR = 30 V, dI/dt = 50 A/μs, Irr = 10 % IRM Typical junction capacitance 4.0 V, 1 MHz THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length with both leads to heat sink ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE BY500-400-E3/54 1.1 54 1400 13" diameter paper tape and reel BY500-400-E3/73 1.1 73 1000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 0.375" (9.5 mm) Lead Length TL = Lead Temperature 5.0 Resistive or Inductive Load 4.0 0.8" x 0.8" x 0.04" (20 mm x 20 mm x 1 mm) Copper Heatsinks TA = Ambient Temperature 3.0 P.C.B. Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) Copper Pad Areas 0.375" (9.5 mm) Lead Length 2.0 1.0 0 1000 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 6.0 Non-Repetitive 100 Repetitive TA = 25 °C 10 ms Single Half Sine-Wave at Rated Load 10 0 20 40 60 80 100 120 140 1 100 10 Temperature (°C) Number of Cycles at 50 Hz Fig. 1 - Forward Current Derating Curves Fig. 2 - Maximum Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88544 Revision: 26-Oct-09 BY500-100 thru BY500-800 Vishay General Semiconductor 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 1 0.1 0.01 0.4 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 5 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1 2.0 100 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance Instantaneous Reverse Current (μA) 10 TJ = 100 °C 1 TJ = 50 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-201AD 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.052 (1.32) 0.048 (1.22) DIA. Document Number: 88544 Revision: 26-Oct-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1