LSTD ALLPMTP All-purpose mount kit Datasheet

ALL-PURPOSE MOUNT KIT
ALLPMT
ALL-PURPOSE MOUNT KIT
The All-Purpose Mount is an articulation mount that may be used with various models. This
mount kit is specifically designed to provide a wide range of articulation and flexibility in both the
azimuth and elevation planes. The mount may be used on any vertical wall or mast up to 2 inches
in diameter, depending on the model. For best results, mount the antenna near the center of the
coverage area. A line-of-sight path between the antenna and active floor locations generally works
best. Although 2.4GHz signals penetrate cubical dividers and interior walls with little attenuation,
reinforced block walls, banks of metal cabinets or steel shelving may attenuate signals or cause
multipath conditions where reflected signals interfere with the primary signal path.
FEATURES
MARKETS
• Allows the antenna to articulate,
resulting in better coverage pattern
• Can be mounted on any vertical wall
or mast up to 2 inches in diameter,
depending on the model
• Available for all the DirectLink series antennas
• Pole, wall and ceiling mounts are also available
PART NUMBER
DESCRIPTION
ALLPMTP
All-purpose mount
ALLPMTA
All-purpose wall mount
ALLPMTB
All-purpose mount for 8 x 13-inch antenna
ALLPMTC
All-purpose mount for 45 x 6.5-inch antenna
ALLPMTD
All-purpose mount for SR240790P antenna
ALLPMTE-001
Universal mast mount bracket for DirectLink series antennas
ALLPMTE-002
Universal mast mount bracket for DirectLink series antennas
TM905BRK
Tilt mount for SR2411120D and S2401290P
BPXCHK
Ceiling mount hardware kit for the BPX-series antenna
BPXPHK
Pole mount hardware kit for the BPX-series antennas
Americas: +1.847 839.6907
[email protected]
Europe: +44.1628.858941
[email protected]
Asia: ++86.21.5855.0827.127
[email protected]
www.lairdtech.com
ANT-DS-ALLPMT_0614
Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability
or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or
consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will
be furnished upon request. © Copyright 2014 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks
or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein
provides a license under any Laird or any third party intellectual property rights.
Similar pages