Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2016 IGS-9122GPM IGS-9122GPM Features Industrial Ethernet Switch 1 EN50155 modular managed Gigabit Ethernet switch with 12x10/100/1000Base-T(X) and 100/1000Base-X, SFP socket, 3 module extender slots ▪ Modular designed and Hot-swappable make network planning easier ▪ Support O-Ring (recovery time < 30ms over 250 units of Gigabit Ethernet and <10ms over 250 units of fast Ethernet) and MSTP (RSTP/STP compatible) for Ethernet Redundancy ▪ O-Chain allow multiple redundant network rings ▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ Support IEEE 1588v2 clock Synchronization ▪ Support IPv6 new internet protocol version ▪ Support Modbus TCP protocol ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Support IEEE 802.3az Energy-Efficient Ethernet technology ▪ Support NTP server protocol ▪ Support IP-based bandwidth management ▪ Support application-based QoS management ▪ Support Device Binding security function ▪ Support DOS/DDOS auto prevention ▪ IGMP v1/v2/v3 (IGMP snooping support) and GMRP for filtering multicast traffic ▪ Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Support port mirror function to monitor port data ▪ Support ACL and 802.1x User Authentication for security ▪ Support 9.6K Bytes Jumbo Frame ▪ Support DBU-01 backup unit device to quickly backup/restore configuration ▪ Event notification through Syslog, Email, SNMP trap, and Relay Output ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Support LLDP Protocol ▪ Support dual power inputs for power redundancy ▪ Din-Rail enabled and fan-less design Introduction IGS-9122GPM is Din-Rail modular managed redundant ring Ethernet switch with 12x10/100/1000Base-T(X) and 2x100/1000Base-X SFP ports. Also, it supports 3 slots for install switch module to expander Ethernet ports. It is hot-swappable so there is no need to power off switch while replace the module. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection), O-Chain, MRP*NOTE, Fast Recovery and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75oC. IGS-9122GPM can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet rolling stock application. ▪ O-Ring : O-Ring is ORing’s proprietary redundant ring technology, with recovery time of less 20 milliseconds and up to 250 nodes. The O-Ring *NOTE: This function is available by request only 1-118 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2016 ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost- Industrial Ethernet Switch redundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. effectiveness in one set of network redundancy topology. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according Industrial Media Converter ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. to TCP/UDP port number. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. Industrial Device Server ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in attack immediately and completely. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more. ▪ Modular Designed : Modular designed can makes network planning easy and allow greater flexibility by letting you install other Ethernet/Optical fiber modular. CAT5e Industrial M2M Gateway Optic Fiber Industrial Cellular VPN Router ▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control applications. Industrial Wireless Access Point short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS Serial IP Camera IP Camera IP Camera Control Cnter Accessories PLC Product Line RGS-7244GP IGS-9122GPM Product Line PLC IP Camera IGAP-620 IDS-5011-WG Product Line *NOTE: This function is available by request only D esign ed for R u gged E xcellence Network Management Software IGS-9122GPM 1-119 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2016 Open-Vision ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Industrial Ethernet Switch 1 Commander Host Monitor Topology View Dimensions (Unit=mm) 1-120 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2016 SWM-04GC-D Industrial 4-port Gigabit Ethernet switch module with 4x1G combo ports. 412g 3,948,727hrs Weight MTBF SWM-40GT-M12-D Industrial 4-port Gigabit Ethernet switch module with 4x10/100/1000Base-T(X) ports, M12 connector. 407g 426,972/333,547hrs Weight 404g MTBF 316,663/517,083hrs BSM-02X-D Industrial bypass switch module, 4x100/1G/10GBase-X, LC connector. Weight MTBF 462g 628,407hrs BSM-20GT-D Industrial bypass switch module with 4x10/100/1000Base-T(X) ports TBD TBD Weight MTBF TBD TBD Weight MTBF Industrial Wireless Access Point BSM-20GT-M12-D Industrial bypass switch module with 4x10/100/1000Base-T(X) ports, M12 connector. Industrial Device Server Weight MTBF SWM-04FX-SS/MM-SC-D Industrial 4-port Gigabit Ethernet switch module with 4x100Base-FX ports, SS/MM mode, SC connector. Industrial Media Converter Weight MTBF SWM-04GF-SS/MM-SC-D Industrial 4-port Gigabit Ethernet switch module with 4x1000Base-X ports, SS/MM mode, SC connector. Industrial Ethernet Switch Optional Switch Module TBD TBD Specifications Industrial Cellular VPN Router ORing Switch Model IGS-9122GPM Physical Ports 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 12 100/1000Base-X SFP Ports 2 3 (support 4x1G combo / 4x1G Fiber / 4x100Mbps Fiber module) Module Slot Number 8k Priority Queues 8 Processing Store-and-Forward Switch Properties Switching latency: 7 us Switching bandwidth: 52Gbps Max. Number of Available VLANs: 4095 VLAN ID Range: 1 to 4094 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define Jumbo frame Up to 9.6K Bytes Network Management Software MAC Table Accessories Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3ae for 10Gigabit Ethernet IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) Industrial M2M Gateway Technology D esign ed for R u gged E xcellence 1-121 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Security Features Industrial Ethernet Switch 1 Software Features Network Redundancy RS-232 Serial Console Port Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) MAC-based authentication MAC address limit VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Web and CLI authentication and authorization IP source guard IEEE 1588v2 clock synchronization IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static) Multiple Registration Protocol (MRP) MSTP (RSTP/STP compatible) Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging IGMP v2/v3 Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client DHCP Relay Modbus TCP SMTP Client NTP server O-Ring O-Chain MRP*NOTE Fast Recovery MSTP (RSTP/STP compatible) RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 (support DBU-01 backup unit) LED Indicators System Ready Indicator (PWR) Green: Indicates that the system ready. The LED is blinking when the system is upgrading firmware. Power Indicator (PWR1 / PWR2) Green: Power LED x 2 Ring Master Indicator (R.M.) Green: Indicates that the system is operating in O-Ring Master mode O-Ring Indicator (Ring) Green: Indicates that the system operating in O-Ring mode Green Blinking: Indicates that the Ring is broken. Fault Indicator (Fault) Amber: Indicate unexpected event occurred 10/100/1000Base-T(X) RJ45 Port Indicator Green for Link/Act indicator. Dual color LED for speed indicator : Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps 100/1000Base-X SFP Port Indicator Green for Link/Act indicator Fault Contact Relay Relay output to carry capacity of 1A at 24VDC Power Redundant power input modular Dual 12~48VDC power inputs at terminal block Power consumption (Typ.) 40 Watts Overload current protection Present Physical Characteristic Enclosure IP-30 Weight (g) 3,365g Dimension (W x D x H) 184 (W) x 155 (D) x 150 (H) mm (7.24x6.1x5.9 inch) Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -40 to 75oC (-40 to 167oF) Operating Humidity 5% to 95% Non-condensing *NOTE: This function is available by request only 1-122 w w w.oring - net wo rk in g.co m v1.0a Jun, 2016 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jun, 2016 FCC Part 15, CISPR (EN55022) class A, EN50121-4, EN50155(pending) EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN 60950-1 Warranty 5 years MTBF 540,456hrs Industrial Media Converter EMI Industrial Ethernet Switch Regulatory approvals Ordering Information Industrial Device Server I G S -9 AA B CC D Option Available Model 10/100/1000Base-T(X) Port Number - 12: 12 ports Model Name IGS-9122GPM Additional Port Number - 2: 2 ports Additional Port Type -GP: Gigabit SFP ports Other Option -M: Modular Design Description Industrial modular managed Gigabit Ethernet switch with 12x10/100/1000Base-T(X) and 2x100/1000Base-X, SFP socket, 3 module extender slots Industrial Cellular VPN Router Optional Slot Module Model Name Description Industrial 4-port Gigabit Ethernet switch module with 4x1G combo ports. SWM-04GF-SS-SC-D Industrial 4-port Gigabit Ethernet switch module with 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector. SWM-04GF-MM-SC-D Industrial 4-port Gigabit Ethernet switch module with 4x1000Base-SX, multi-mode, 550m/850nm, SC connector. SWM-04FX-SS-SC-D Industrial 4-port Ethernet switch module with 4x100Base-FX, single-mode, 30Km/1310nm, SC connector. SWM-04FX-MM-SC-D Industrial 4-port Ethernet switch module with 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector. SWM-40GT-M12-D Industrial 4-port Gigabit Ethernet switch module with 4x10/100/1000Base-T(X) ports, M12 connector. BSM-02X-D (under dev.) Industrial bypass switch module, 4x100/1G/10GBase-X, LC connector. BSM-20GT-D (under dev.) Industrial bypass switch module with 4x10/100/1000Base-T(X) ports. BSM-20GT-M12-D (under dev.) Industrial bypass switch module with 4x10/100/1000Base-T(X) ports, M12 connector. Optional Accessories ‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices ‧SFP100 series : 100Mbps SFP optical transceiver ‧SFP 1G series : 1Gbps SFP optical transceiver ‧DR-45 series : 45 Watts DIN-Rail power supply ‧DR-75 series : 75 Watts DIN-Rail power supply ‧DR-120 series : 120 Watts DIN-Rail power supply D esign ed for R u gged E xcellence Network Management Software Packing List ‧IGS-9122GPM x 1 ‧ORing Tool DVD x 1 ‧Quick Installation Guide x 1 ‧Din-Rail Kit x 1 ‧Console Cable x 1 Accessories SWM-04GC-D Industrial M2M Gateway Available Model Industrial Wireless Access Point Code Definition 1-123