GBU6A - GBU6M GBU6A - GBU6M 0.125 X 45O (3.2) Typ 0.880 (22.3) 0.860 (21.8) Features 0.160 (4.1) 0.140 (3.5) • Surge overload rating: 175 amperes peak. • Reliable low cost construction utilizing molded plastic technique. • 0.740 (18.8) 0.720 (18.3) 0.075 R (1.9) 0.085 (2.16) 0.065 (1.65) + ~ + ~ 0.080 (2.03) 0.060 (1.52) 0.100 (2.54) 0.085 (2.16) GBU 0.080 (2.03) 0.065 (1.65) Absolute Maximum Ratings* 0.050 (1.27) 0.040 (1.02) 0.050 (1.3) 0.040 (1.0) Dimensions are in: inches (mm) 6.0 Ampere Bridge Rectifiers Symbol 0.310 (7.9) 0.290 (7.4) + 0.710 (18.0) 0.690 (17.5) Ideal for printed circuit board. 0.210 (5.3) 0.190 (4.8) TA = 25°C unless otherwise noted Parameter IO Average Rectified Current if(surge) RθJA Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg RθJC Thermal Resistance, Junction to Case,*** per leg Tstg TJ PD 0.020 R TYP Value Units 6.0 A 175 A 14.5 @ TA = 100°C 8.6 W mW/°C °C/W 3.1 °C/W Storage Temperature Range -55 to +150 °C Operating Junction Temperature -55 to +150 °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.5 x 0.5" (12 x 12 mm). ***Device mounted on Al plate with 2.6 x 1.4" x 0.06" (6,5 x 3.5 x 0.15 cm). Electrical Characteristics TA = 25°C unless otherwise noted Parameter Peak Repetitive Reverse Voltage Device Units 6A 6B 6D 6G 6J 6K 6M 50 100 200 400 600 800 1000 V Maximum RMS Input Voltage 35 70 140 280 420 560 700 V DC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V Maximum Reverse Leakage, per element @ rated VR TA = 25°C TA = 125°C Maximum Forward Voltage Drop, per element @ 6.0 A I2t rating for fusing t < 8.35 ms 1999 Fairchild Semiconductor Corporation 5.0 500 µA µA 1.0 127 V A2Sec GBU6A-GBU6M, Rev. A (continued) Typical Characteristics Forward Current Derating Curve Forward Characteristics 100 5 FORWARD CURRENT (A) FORWARD CURRENT (A) 6 4 HEAT-SINK MOUNTING, TC 4x4x0.15" COPPER PLATE 3 2 MOUNTED ON PC BOARD, TA 0.5" (12.7mm) LEAD LENGTH 60Hz RESISTIVE OR INDUCTIVE LOAD 1 0 0 50 100 TEMPERATURE ( º C) 10 0.1 0.7 150 Reverse Characteristics 0.8 0.9 1 1.1 1.2 FORWARD VOLTAGE (V) 1.3 1.4 Non-Repetitive Surge Current 10 FORWARD SURGE CURRENT (A) 175 T A = 100 º C 1 0.1 TA = 25 º C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 140 105 70 T A = 105 º C 35 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 Junction Capacitance 400 CAPACITANCE (pF) REVERSE CURRENT ( µ A) TA = 25º C Pulse Width = 300µs 1% Duty Cycle 1 TA = 25º C f = 1.0 MHz Visg = 50m Vp-p 100 50 10 1 5 10 REVERSE VOLTAGE (V) 50 100 GBU6A-GBU6M, Rev. A GBU6A - GBU6M Bridge Rectifiers TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.