APT30M40JVR
70A 0.040Ω
300V
POWER MOS V ®
S
S
Power MOS V® is a new generation of high voltage N-Channel enhancement
mode power MOSFETs. This new technology minimizes the JFET effect,
increases packing density and reduces the on-resistance. Power MOS V®
also achieves faster switching speeds through optimized gate layout.
27
2
T-
D
G
SO
"UL Recognized"
ISOTOP ®
• Faster Switching
• 100% Avalanche Tested
• Lower Leakage
• Popular SOT-227 Package
D
G
S
MAXIMUM RATINGS
Symbol
VDSS
ID
All Ratings: TC = 25°C unless otherwise specified.
Parameter
APT30M40JVR
UNIT
300
Volts
Drain-Source Voltage
70
Continuous Drain Current @ TC = 25°C
1
Amps
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage Continuous
±30
Gate-Source Voltage Transient
±40
Total Power Dissipation @ TC = 25°C
450
Watts
Linear Derating Factor
3.6
W/°C
VGSM
PD
TJ,TSTG
280
-55 to 150
Operating and Storage Junction Temperature Range
TL
Lead Temperature: 0.063" from Case for 10 Sec.
IAR
Avalanche Current
1
70
1
Repetitive Avalanche Energy
EAS
Single Pulse Avalanche Energy
°C
300
(Repetitive and Non-Repetitive)
EAR
Volts
Amps
50
4
mJ
2500
STATIC ELECTRICAL CHARACTERISTICS
BVDSS
ID(on)
RDS(on)
IDSS
IGSS
VGS(th)
Characteristic / Test Conditions
MIN
Drain-Source Breakdown Voltage (VGS = 0V, I D = 250µA)
300
Volts
70
Amps
On State Drain Current
2
(VDS > I D(on) x R DS(on) Max, VGS = 10V)
Drain-Source On-State Resistance
2
TYP
(VGS = 10V, 0.5 ID[Cont.])
MAX
0.040
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V)
25
Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125°C)
Ohms
µA
250
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
UNIT
±100
nA
4
Volts
2
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
USA
APT Website - http://www.advancedpower.com
405 S.W. Columbia Street
Bend, Oregon 97702-1035
Phone: (541) 382-8028
FAX: (541) 388-0364
F-33700 Merignac - France
Phone: (33) 5 57 92 15 15
FAX: (33) 5 56 47 97 61
EUROPE
Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord
050-5552 Rev C
Symbol
DYNAMIC CHARACTERISTICS
Symbol
APT30M40JVR
Characteristic
Test Conditions
MIN
TYP
MAX
Ciss
Input Capacitance
VGS = 0V
8500
10200
Coss
Output Capacitance
VDS = 25V
1500
2100
Reverse Transfer Capacitance
f = 1 MHz
390
585
Crss
Qg
Total Gate Charge
Qgs
3
VGS = 10V
285
425
VDD = 0.5 VDSS
56
85
ID = ID[Cont.] @ 25°C
120
180
Gate-Source Charge
Qgd
Gate-Drain ("Miller ") Charge
td(on)
Turn-on Delay Time
tr
VGS = 15V
16
32
VDD = 0.5 VDSS
20
40
ID = ID[Cont.] @ 25°C
48
72
RG = 0.6Ω
4
8
TYP
MAX
Rise Time
td(off)
Turn-off Delay Time
tf
Fall Time
UNIT
pF
nC
ns
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol
IS
ISM
VSD
Characteristic / Test Conditions
MIN
70
Continuous Source Current (Body Diode)
Pulsed Source Current
1
(Body Diode)
280
Diode Forward Voltage
2
(VGS = 0V, IS = -ID[Cont.])
1.3
UNIT
Amps
Volts
t rr
Reverse Recovery Time (IS = -ID[Cont.], dl S/dt = 100A/µs)
530
ns
Q rr
Reverse Recovery Charge (IS = -ID[Cont.], dl S/dt = 100A/µs)
11.5
µC
THERMAL / PACKAGE CHARACTERISTICS
Symbol
Characteristic
MIN
RθJC
Junction to Case
RθJA
Junction to Ambient
VIsolation
RMS Voltage (50-60 Hz Sinusoidal Waveform From Terminals to Mounting Base for 1 Min.)
Torque
Maximum Torque for Device Mounting Screws and Electrical Terminations.
1 Repetitive Rating: Pulse width limited by maximum junction
temperature.
2 Pulse Test: Pulse width < 380 µS, Duty Cycle < 2%
TYP
MAX
UNIT
0.28
40
°C/W
2500
Volts
13
3 See MIL-STD-750 Method 3471
4 Starting T = +25°C, L = 1.02mH, R = 25Ω, Peak I = 70A
j
G
L
APT Reserves the right to change, without notice, the specifications and information contained herein.
D=0.5
0.1
0.2
0.05
0.1
0.05
0.01
0.005
Note:
0.02
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
050-5552 Rev C
0.3
t1
0.01
SINGLE PULSE
t2
Duty Factor D = t1/t2
Peak TJ = PDM x ZθJC + TC
0.001
10-5
10-4
10-3
10-2
10-1
1.0
10
RECTANGULAR PULSE DURATION (SECONDS)
FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
lb•in
APT30M40JVR
150
VGS=6.5V, 7V, 10V & 15V
120
6V
90
5.5V
60
5V
30
4.5V
VGS=15V
ID, DRAIN CURRENT (AMPERES)
4V
0
0
30
60
90
120
150
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 2, TYPICAL OUTPUT CHARACTERISTICS
TJ = -55°C
TJ = +25°C
120
TJ = +125°C
VDS> ID (ON) x RDS (ON)MAX.
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
90
60
TJ = +125°C
30
TJ = +25°C
TJ = -55°C
0
0
2
4
6
8
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 4, TYPICAL TRANSFER CHARACTERISTICS
60
40
20
0
50
75
100
125
150
TC, CASE TEMPERATURE (°C)
FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE
25
90
5.5V
60
5V
30
4.5V
1.3
V
GS
NORMALIZED TO
= 10V @ 0.5 I [Cont.]
D
1.2
1.1
VGS=10V
1.0
VGS=20V
0.9
0.8
0
40
80
120
160
200
ID, DRAIN CURRENT (AMPERES)
FIGURE 5, RDS(ON) vs DRAIN CURRENT
1.20
1.15
1.10
1.05
1.00
0.95
0.90
-25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE
-50
1.2
2.5
I = 0.5 I [Cont.]
D
D
V
GS
= 10V
2.0
1.5
1.0
0.5
0.0
-50
-25
0
25 50
75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 8, ON-RESISTANCE vs. TEMPERATURE
VGS(TH), THRESHOLD VOLTAGE
(NORMALIZED)
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
(NORMALIZED)
6V
4V
0
1
2
3
4
5
6
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 3, TYPICAL OUTPUT CHARACTERISTICS
BVDSS, DRAIN-TO-SOURCE BREAKDOWN
VOLTAGE (NORMALIZED)
ID, DRAIN CURRENT (AMPERES)
80
VGS=6.5V & 7V
0
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
ID, DRAIN CURRENT (AMPERES)
150
VGS=10V
120
1.1
1.0
0.9
0.8
0.7
0.6
-50
-25
0
25 50 75 100 125 150
TC, CASE TEMPERATURE (°C)
FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-5552 Rev C
ID, DRAIN CURRENT (AMPERES)
150
APT30M40JVR
30,000
10µS
OPERATION HERE
LIMITED BY RDS (ON)
100µS
100
1mS
10
10mS
5
100mS
DC
1
TC =+25°C
TJ =+150°C
SINGLE PULSE
.5
.1
Crss
1,000
IDR, REVERSE DRAIN CURRENT (AMPERES)
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
I = I [Cont.]
D
VDS=60V
16
Coss
500
.01
.1
1
10
50
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 11, TYPICAL CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
20
D
5,000
100
1
5
10
50 100
300
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 10, MAXIMUM SAFE OPERATING AREA
VDS=150V
12
VDS=240V
8
4
0
Ciss
10,000
50
C, CAPACITANCE (pF)
ID, DRAIN CURRENT (AMPERES)
400
0
100
200
300
400
500
Qg, TOTAL GATE CHARGE (nC)
FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE
400
TJ =+150°C
TJ =+25°C
100
50
10
5
1
0
0.4
0.8
1.2
1.6
2.0
VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS)
FIGURE 13, TYPICAL SOURCE-DRAIN DIODE FORWARD VOLTAGE
SOT-227 (ISOTOP®) Package Outline
11.8 (.463)
12.2 (.480)
31.5 (1.240)
31.7 (1.248)
7.8 (.307)
8.2 (.322)
r = 4.0 (.157)
(2 places)
8.9 (.350)
9.6 (.378)
Hex Nut M4
(4 places)
W=4.1 (.161)
W=4.3 (.169)
H=4.8 (.187)
H=4.9 (.193)
(4 places)
25.2 (0.992)
0.75 (.030) 12.6 (.496) 25.4 (1.000)
0.85 (.033) 12.8 (.504)
4.0 (.157)
4.2 (.165)
(2 places)
1.95 (.077)
2.14 (.084)
3.3 (.129)
3.6 (.143)
14.9 (.587)
15.1 (.594)
* Source
Drain
30.1 (1.185)
30.3 (1.193)
* Source terminals are shorted
internally. Current handling
capability is equal for either
Source terminal.
38.0 (1.496)
38.2 (1.504)
050-5552 Rev C
* Source
Gate
Dimensions in Millimeters and (Inches)
"UL Recognized" File No. E145592
ISOTOP® is a Registered Trademark of SGS Thomson.
APT's devices are covered by one or more of the following U.S.patents: 4,895,810
5,256,583
5,045,903
4,748,103
5,089,434
5,283,202
5,182,234
5,231,474
5,019,522
5,434,095
5,262,336
5,528,058