2.54mm Pitch High Density Connector A1 and A2 Series ■Features 1. High Density Mounting Connectors are aligned in the longitudinal direction on the 2.54 mm mesh board, so that no idle space can occur. 2. Variation in Number of Contacts The A1 series contains 16 types of 6 to 64 contacts, while the A2 series contains 20 types of 1 to 20 contacts, 3. Compatibility The A1 series is compatible with HIF3B series cable side and HIF3H receptacle for wide applications. ■Product Specifications Rating Current rating: 3A Operating Temperature Range: Voltage rating: 200V AC Operating Moisture Range: Item -55 to +85ç (Note 1) Storage Temperature Range: -10 to +60ç (Note 2) 40 to 80% Storage Humidity Range: Specification 1. Insulation Resistance 1000M ohms min. 40 to 70% (Note 2) Condition 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Humidity (Steady state) Insulation resistance 1000M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle No damage, cracks, or parts looseness. 7. Operating Life Contact resistance: 15m ohms max. 8. Resistance to Soldering heat No deformation of components affecting performance. (-65ç: 30 minutes ➝15 to 35ç: 5 minutes max.➝ 125ç: 30 minutes➝ 15 to 35ç: 5 minutes max.) 5 cycles 500 cycles Flow: 260ç for 10 seconds Manual soldering: 300ç for 3 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. ■Applications Computers, VTR, and other various kinds of electronic equipment ■Material Part Pin header C2 Insulator Contact Material Finish Remarks PBT Black UL94V-0 Brass Selective gold plated ––––––– Crimping socket Polyamid Black UL94V-0 Crimping contact Phosphor bronze Selective gold plated ––––––– ■ Ordering Information K Pin Header A 1 - 6 P A - 2.54 DS q w e r t y u q Series Name: A w Series No.:1 (double row) 2 (single row) e Number of contacts: A1...6, 8, 10, 12, 14, 16, 20, 24, 26, 34, 40, 50, 60, 64 A2...1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 r P: Pin header t A: Selective gold plated y Contact pitch : 2.54mm u Contact type: DS : Right angle type DSA : Straight type K Crimping Socket A 1 - 12 D - 2.54 C q w e r t y q Series Name : A w Series No. : 1 (double row) 2 (single row) e Number of contacts: A1 : 8, 10, 12 A2 : 5, 6 r Contact alignment : A1 : D (double row) A2 : S (single row) K Crimping Contact A 1 - 3236 - SCFC q w e t Contact pitch : 2.54mm y Connection type: C : crimping q Series Name : A w Series No. : 1 e Applicable cable size r 2226: AWG#22~ AWG#26 2630: AWG#26~ AWG#30 3236: AWG#32~ AWG#36 r Packaging type SCFC : Reel SCC : Bag C3 ■ A1 (Double Row)- Right Angle Type Unit: mm C4 Unit: mm Part Number CL No. Number of Contacts A B Part Number CL No. Number of Contacts A1-06PA-2.54DS 619-0001-7 6 07.62 05.08 A1-26PA-2.54DS 619-0009-9 26 33.02 30.48 A1-08PA-2.54DS 619-0016-4 8 10.16 07.62 A1-30PA-2.54DS 619-0010-8 30 38.10 35.56 A1-10PA-2.54DS 619-0002-0 10 12.70 10.16 A1-34PA-2.54DS 619-0011-0 34 43.18 40.64 A1-12PA-2.54DS 619-0003-2 12 15.24 12.70 A1-40PA-2.54DS 619-0012-3 40 50.80 48.26 A1-14PA-2.54DS 619-0004-5 14 17.78 15.24 A1-50PA-2.54DS 619-0013-6 50 63.50 60.96 A1-16PA-2.54DS 619-0005-8 16 20.32 17.78 A1-60PA-2.54DS 619-0014-9 60 76.20 73.66 A1-18PA-2.54DS 619-0006-0 18 22.86 20.32 A1-64PA-2.54DS 619-0015-1 64 81.28 78.74 A1-20PA-2.54DS 619-0007-3 20 25.40 22.86 A B ■ A1 (Double Row)- Straight Type Unit: mm Part Number CL No. Number of Contacts A B A1-06PA-2.54DSA 619-0021-4 6 07.32 05.08 A1-08PA-2.54DSA 619-0037-4 8 09.86 07.62 A1-10PA-2.54DSA 619-0022-7 10 12.40 10.16 A1-12PA-2.54DSA 619-0023-0 12 14.94 12.70 A1-14PA-2.54DSA 619-0024-2 14 17.48 15.24 A1-16PA-2.54DSA 619-0025-5 16 20.02 17.78 A1-18PA-2.54DSA 619-0026-8 18 22.56 20.32 A1-20PA-2.54DSA 619-0027-0 20 25.10 22.86 A1-24PA-2.54DSA 619-0028-3 24 30.18 27.94 A1-26PA-2.54DSA 619-0029-6 26 32.72 30.48 A1-30PA-2.54DSA 619-0030-5 30 37.80 35.56 A1-34PA-2.54DSA 619-0031-8 34 42.88 40.64 A1-40PA-2.54DSA 619-0032-0 40 50.50 48.26 A1-50PA-2.54DSA 619-0033-3 50 63.20 60.96 A1-60PA-2.54DSA 619-0034-6 60 75.90 73.66 A1-64PA-2.54DSA 619-0035-9 64 80.98 78.74 C5 ■ A2 (Single Row)-DIP Type K Straight type K Right angle type K Straight type Part Number C6 Unit: mm CL No. Number of Contacts K Right angle type Unit: mm A B Part Number CL No. Number of Contacts A B – A2-01PA-2.54DSA 620-0051-5 1 02.24 – A2-01PA-2.54DS 620-0001-7 1 02.24 A2-02PA-2.54DSA 620-0052-8 2 04.78 02.54 A2-02PA-2.54DS 620-0002-0 2 04.78 02.54 A2-03PA-2.54DSA 620-0053-0 3 07.32 05.08 A2-03PA-2.54DS 620-0003-2 3 07.32 05.08 A2-04PA-2.54DSA 620-0054-3 4 09.86 07.62 A2-04PA-2.54DS 620-0004-5 4 09.86 07.62 A2-05PA-2.54DSA 620-0055-6 5 12.40 10.16 A2-05PA-2.54DS 620-0005-8 5 12.40 10.16 A2-06PA-2.54DSA 620-0056-9 6 14.94 12.70 A2-06PA-2.54DS 620-0006-0 6 14.94 12.70 A2-07PA-2.54DSA 620-0057-1 7 17.48 15.24 A2-07PA-2.54DS 620-0007-3 7 17.48 15.24 A2-08PA-2.54DSA 620-0058-4 8 20.02 17.78 A2-08PA-2.54DS 620-0008-6 8 20.02 17.78 A2-09PA-2.54DSA 620-0059-7 9 22.56 20.30 A2-09PA-2.54DS 620-0009-9 9 22.56 20.30 A2-10PA-2.54DSA 620-0060-6 10 25.10 22.86 A2-10PA-2.54DS 620-0010-8 10 25.10 22.86 A2-11PA-2.54DSA 620-0061-9 11 27.64 25.40 A2-11PA-2.54DS 620-0011-0 11 27.64 25.40 A2-12PA-2.54DSA 620-0062-1 12 30.18 27.94 A2-12PA-2.54DS 620-0012-3 12 30.18 27.94 A2-13PA-2.54DSA 620-0063-4 13 32.72 30.48 A2-13PA-2.54DS 620-0013-6 13 32.72 30.48 A2-14PA-2.54DSA 620-0064-7 14 35.26 33.02 A2-14PA-2.54DS 620-0014-9 14 35.26 33.02 A2-15PA-2.54DSA 620-0065-0 15 37.80 35.56 A2-15PA-2.54DS 620-0015-1 15 37.80 35.56 A2-16PA-2.54DSA 620-0066-2 16 40.34 38.10 A2-16PA-2.54DS 620-0016-4 16 40.34 38.10 A2-17PA-2.54DSA 620-0067-5 17 42.88 40.64 A2-17PA-2.54DS 620-0017-7 17 42.88 40.64 A2-18PA-2.54DSA 620-0068-8 18 45.42 43.18 A2-18PA-2.54DS 620-0018-0 18 45.42 43.18 A2-19PA-2.54DSA 620-0069-0 19 47.96 45.72 A2-19PA-2.54DS 620-0019-2 19 47.96 45.72 A2-20PA-2.54DSA 620-0070-0 20 50.50 48.26 A2-20PA-2.54DS 620-0020-1 20 50.50 48.26 ■ Crimping Socket K Double Row Type A1-*D-2.54C Part Number CL No. A B A1-08D-2.54C 619-0093-5 10.16 07.62 A1-10D-2.54C 619-0091-0 12.70 10.16 A1-12D-2.54C 619-0092-2 15.24 12.70 Remarks Note 1 Note 1. No. 3 and 8 contacts can be polarized. K Single Row Type A2-*S-2.54C Part Number CL No. A B A2-5S-2.54C 620-0101-1 12.70 10.16 A2-6S-2.54C 620-0102-4 15.24 12.70 Remarks Note 1 Note 1. No. 4 contact can be polarized. C7 ■ Crimping Contact SCC contact Part Number CL No. A1-2226SCFC 619-0211-0 A1-2226SCC 619-0214-8 A1-2630SCFC 619-0212-2 A1-2630SCC 619-0215-0 A1-3236SCFC 619-0213-5 SCFC contact Applicable Cable Packaging Type AWG#22 to #26 AWG#26 to #30 AWG#32 to #36 Quantity A B C D E F Reel 10,000 11.5 0.8 1.8 1.80 2.3 2.6 Bag 100 11.5 0.8 1.8 1.80 2.3 2.6 Reel 10,000 11.5 0.8 1.4 1.35 2.0 2.1 Bag 100 11.5 0.8 1.4 1.35 2.0 2.1 Reel 10,000 12.4 1.7 1.1 1.10 1.4 1.5 ■ Polarizing Key HIF3-GPIN(A) Part Number CL No. Material Remarks HIF3-GPIN(A) 562-0126-6 Poly acetal (white) 5 pieces set ■ Crimping Tools Part Number Manual crimping tool Crimper unit Applicator C8 CL No. Applicable Contact Applicable Cable HIF3-TB2226HC 550-0154-1 A1-2226SCC AWG#22 to #26 HIF3-TB2630HC 550-0155-4 A1-2630SCC AWG#26 to #30 ––––––––– ––––––––– AP105-A1-2226S 901-4008-4 A1-2226SCFC ––––––––– AP105-A1-2630S 901-4009-7 A1-2630SCFC ––––––––– AP105-A1-3236S 901-4011-9 A1-3236SCFC ––––––––– CM-105 901-0005-4 ■ Short Pin ■ Performance Item Rating Value Part Number CL No. HIF3GA-2.54SP 562-0403-4 Contact Resistance 30m ohms max. at 0.1A DC Insulation Resistance 1000M ohms min. at 500V DC Current rating 3A C9